You could get any random solder fume extractor, but if you’re looking for expert advice on choosing the best one for your needs then you’ve arrived at the right place.
It doesn’t matter what your solder fume extractor needs are or what your budget is, because I’ve done an in-depth analysis to include the best-rated options suitable for diversified usage needs and different budget ranges.
![KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering, Electric Iron Welding, 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter [Updated, Hose pre-attached]](https://m.media-amazon.com/images/I/41zSWi9+zeL._SL500_.jpg)
To make this list, I’ve spent 80 hours researching solder fume extractor from the best brands such as: Fstop Labs, KOTTO, 180°.
Note: Make sure that option you’re choosing has all the features you need. Afterall, is there any point in purchasing something that’s not usable?
50 Best solder fume extractor in 2023: After 80 Hours of Research
To make this list an unbiased resource for choosing the best solder fume extractor, I contacted 30 experts and discussed various aspects to consider. After a huge discussion, I went across customer reviews, researched the reputed brands, and a lot of other things. Because my aim is to recommend products that are highly value for your money.
1. KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station -Tools & Home Improvement
By Fstop Labs
More Pictures- Solder Fume Extractor/Smoke Trap/Smoke Eater/Smoke Filter/Solder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station.
- US based customer support, 30 days full satisfaction no question asked return period.
- Working temperature: -20℃～60℃, Power consumption: 120V, 30W (50 / 60Hz).
- 4 non-slip heavy duty rubber feet anchors the unit to the ground
- Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away
- Easy to replace filter, Includes one smoke trap replacement filter
- Handy carrying handle allows you to move the unit easily.
- 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
2. KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering, Electric Iron Welding, 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter [Updated, Hose pre-attached] -Extractors
By KOTTO
- A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
- Working temperature: -20℃～60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
- US-based customer support, 30 days full satisfaction no question asked return period.
- Easy to replace the filter, Includes one replacement filter
- Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away
- Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
- The fan speed is adjustable
- Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
3. 180° |Solder Fume Extractor| Solder Smoke Absorber|Smoke Prevention Absorber| DIY Working Fan for Soldering| A noise-free Optimized 3000 RPM fan suction unit With a Replacement Filter -Extractors
By 180°
- 2) Air Flow-Another way to get an idea of the performance of your solder smoke absorber is to check its airflow capacity.3) Warranty-While it does not affect the performance of your solder smoke absorber directly,
- Very compact and light-weightedThe greatest thing about the 180° Solder Smoker Absorber is that 0.4 inches thick activated filter absorbs and captures solder fumes effectively and helps to dissipation into the room.
- How Do You Choose the Best Solder Fume Extractor?1)Power Rating- Since a solder smoke absorber has a fan inside, making sure that this fan is powerful enough for collecting all of the smoke is quite important
- Power Consumption & Free Replacement FilterTemperature range: -20°C to 60°C; power consumption: 120V, 30W (50/60Hz).It also comes with a Replacement Filter and It’s really easy to replace it.
- It is a portable and compact est Solder fume extractor with a noise-free Optimized 3000 RPM fan suction unit.
- WARRANTY and SERVICEProvides you with 24-hour email contact service & 30-day money-back guarantee
- Power RatingWhile it is decently powerful, its airflow rating is given in RPM and not in CFM
4. SainSmart Solder Fume Extractor Smoke Absorber with Flexible Magnetic Soldering Arms for Soldering DIY Working Station, 4 PCS Carbon Filter -Tools & Home Improvement
By SainSmart
- It can be placed on your working area stably, no worries about being easily moved during use.
- Activated Carbon Filter The 0.3in thick activated carbon filter cotton effectively absorbs and seizes fumes from solder, flux, laser engraving and chemicals
- User Friendly DesignBoth the carrying handle and the 1.3m long power cord allow you to move the machine easily
- It is very easy to replace and we suggest that you replace the filter every 3 months.
- Strong Absorption With the large 15050 pure copper motor and the 3300 RPM high suction silent solder fan，the effective smoke absorber distance can reach 7.9in
- Sturdy Metal Frame DesignMade of ESD-safe metal, it is much sturdier and more durable than the solder smoke absorber with plastic frame
- The helping hands can be rotated in 360 degrees and you can remove them out of the way when you don’t need them.
- The parcel includes 3 pieces of extra activated carbon filter cotton for replacement
- No assembly required, just plug in and press the switch to use.
- The absorption of the SainSmart Solder Fume Extractor performs 30% better than other Solder Fume Extractor and only generates less noise.
- 4 non-slip heavy-duty rubber feet anchor the unit to the ground
- With 2 Magnetic Helping HandsThis solder smoke absorber comes with 2 magnetic soldering helping hands making simple repairs even easier
- It can filter the toxic substances and purify your work area effectively
5. Solder Fume Extractor – MUIN 3 Stage Filtration Solder Smoke Absorber for Soldering and Wood Burning,Portable Soldering Fume Extractor Fan for Soldering Station (Black) -Extractors
By MUIN
- We ensure quality by using ABS material in the construction of this solder extractor fan
- STRONG SUCTION WITH SLIGHT NOISE: The predominantly optimized soldering fan empowers you to remove fumes even 4-5 Inches away with minor noise
- HIGHLY VERSATILE: The high versatility of this fume extractor soldering fan enables you to stay relaxed and concentrated throughout Soldering, Wood-Burning (Pyrography), 3D Printing, Stained Glass, and Crafting, Nail Salons, Woodworking, Jewelry Making, and Smoking.
- Click ADD TO CART and be ready to get a sturdy solder fumes extractor at your doorstep!
- UNUSUAL STORAGE SAVER: The highly compatible design of this solder filter heightens its portability, allowing it to take a minimum space to avoid cluttering on your desktop.
- You will experience fresh, focused, and devoted working surroundings with this solder fan.
- ELIMINATES IRRITATING ODORS: Featuring 3 Stage Filter, the fume extractor effectively absorbs and seizes fumes from solder, flux, chemicals, gases, and ease to overcome disturbing odors in your working spaces.
- TOP-NOTCH MATERIAL: MUIN is working diligently in making expediting products so far
6. Antidious Fume Extractor Anti-ESD Solder Smoke Absorber Portable Filter for Soldering DIY Fan Extraction Equipment with Spare Activated Carbon for Brazing Welding Soldering, Fume Prevention Remover -Extractors
By Antidious
- – ESD protection : Surge protection suppress voltage transients and divert excessive current away from sensitive electronic components to protect your electronics.
- – Horizontal or vertical : Works efficiently in different environments
- – EC motor : It can absorb smoke from 4-5 inches away, low noise, high energy saving, small vibration, Long-lasting working time for over 57000 hours.
- Capture and absorbs of fumes and harmful smoke, ensures a breathable environment in your workspace.
- Its small size allows users to keep it close to themselves without occupying too much space.
- As long as you turn on the button, you can stop breathing the evil and smelly soldering fumes.
- – Easy to replace the filter : Come with 2 filters, made of features urethane foam and activated carbon
- – Smooth surface : Made of high-grade ABS components, which makes it very durable and sturdy
7. Solder Fume Extractor Smoke Absorber Remover Smoke Prevention Absorber 12V DIY Working Fan for Soldering Station -Extractors
By NOEVSBIG
- High-Efficient Absorb: Optimized 2800 RPM high suction fan is low noise, Strong absorption, effectively absorb the toxic fumes, air purification.
- Upgraded Design: Pure copper motor.The enclosure is made from metal.4 non-slip heavy-duty rubber feet anchor the unit to the ground
- 100% Satisfaction Service： Export products 100% quality inspection, all customers support 3 months of unconditional exchange or return policy and promise to provide a 3-year after-sales service.
- ESD-Safe Design: The solder smoke absorber is made of ESD-safe materials.
- Easy to replace the filter: Includes two replacement filter.
- A handy carrying handle allows you to move the unit easily.
8. 3-in-1 Solder Smoke Absorber Fume Extractor Fan with 2 Helping Hands and 3 Carbon Filters, 10 Brightness 3 Light Colors LED Lamp, Desk Clamp, for ESD DIY Working Soldering Desoldering Rework Station -Extractors
By Toolour
- And equipped 3 fixed knobs and 2 pair fixed springs help you adjust the lamp position smoothly without swaying left or right, neither sharp falling nor shaking, NOTE: To guarantee the best smoke absorbing, please make the fan and solder joint within 10inches(25cm).
- ❃ Adjustable Arms: The lamp head can be put 220 degrees up and down, and 360 degrees swivel
- Eliminates the frustration of traditional helping hands
- You can perform maintenance/welding etc
- ❃ 2Pcs Flexible Universal Arms: 2 flexible helping hands, universal joint pipe, easily positioned where you want them
- Extra 3 easily replaceable filters give you good and timely smoke prevention filter supplements
- You can adjust and use according to your needs.
- 8.85 inches and 8.85 inches extendable long arm and expanded up to 17 inches
- Angle flexibility amply meets the various situations, can precisely cover the smoke diffusing area.
- ❃ Solder Smoke Absorber/Fume Remover/Smoke Extractor: Lead smoke is toxic during soldering, even if it is lead-free solder, which contains a certain amount of lead, harmful to your health
- ❃ Multifunctional LED Lamp: At the time of smoke absorbed fan working, its 3 Light Colors (3000K-4500K-6000K) and 10 Brightness Levels can help you work in various light conditions
- items with two helping arms, and at the same time to use solder smoke absorber can improve your work efficiency better.
- The alligator clips comes with a rubber protective cap, protect the PCB from short or avoid item damaged because of the sharp clip jaw
- ❃ Low Noise Fan with Smoke Filter: ESD safe smoke Extractor fan can extract away the solder, flux, chemicals, gases or other hazardous substances in the solder smoke, and purified by the activated carbon filter net
- Recommended filter net replacement every 4 to 5 months depending on usage.
- Natural light illumination, soft and without ghost, glare, protect eyes
- Our 3in1 soldering smoke absorber/fume remover/smoke extractor prevention absorber DIY working fan(with Carbon Filter LED Daylight)protect you away from poisonous smoke
9. KNOKOO Solder Fume extractor 100W FES150S, MINI Desktop Soldering Smoke Absorber Remover for DIY Welding and Phone Repair -Extractors
By KNOKOO
- [TRIPLE FILTERS EQUIPPED] Pre-filter, medium filter and high efficiency filter to absorb the fume effectively, provide you with a fresh and comfortable working environment
- [Universal smoking pipe]Smoking pipe-360-degree universal adjustment, no need for external support
- [HIGH PERFORMANCE MOTOR] High-power brushless DC motor to provide large air volume while keep low noise.High inhalation force and high smoking efficiency.
- The primary, medium and main filter elements can be replaced separately, which prolongs the service life and reduces the use cost.
- [SIMPLE OPERATION AND INSTALLATION] Installation is simple and convenient, no additional pipes are needed, saving space.
- Can adjust the length of the pipe freely, adjustable air volume, directional adjustment of the air duct, and free positioning.
- [BUILT-IN AIR CIRCULATION FILTER] Air circulation filter can prevent indoor fume from being discharged to the outside directly, achieving smoke absorb and purify air.
10. Solder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter -Extractors
By Anztek
- The replacement of the activated carbon filter piece is convenient and quick.
- It adopt the high performance fan with low noise, and the suction is strongThe structure is simple
- It’s a good helper for mobile phone maintenance, great for electronics, arts and crafts, stained glass work, soldering station work.
- Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station.
- Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away
- The filter is made of special foam with refined activated carbon, which has high suction and flux absorption properties.
- Comes with 5 Active carbon filters
- Long-lasting working time for over 50,000 hours.
11. Solder Fume Extractor TOAUTO 3500 RPM Noise-free Solder Fan,60m³/h Adjustable Smoke Fume Remover with 3 Strong Adsorption Filter for Soldering, Electric Iron Welding, 3d Printing -Extractors
By TOAUTO
- Strong AdsorptionThe filter is made of special polyurethane foam and refined activated carbon, which has a high adsorption function.The fume extractor filter helps to prevent dissipation into the room.
- Widely Used60（m3/h) high suction fan can captures and absorbs fumes from solder, flux, chemicals, gases，smoke and so on.The solder fan could efficient and rapid elimination of toxic gases
- Noise-free & High-quality Materials Low noise and high-efficient 3500 RPM fan operates at acceptable db levels in solder workstations.The fume extractor soldering made of ESD safe material，lightweight and durable.
- Equipped with a Pipe InterfaceYou can also choose to connect to the pipe to exhaust the smoke outside.Note: please purchase additional smoking pipe yourself if you need
- Adjustable and Easy to UseThe solder welding fume extractor can be used at various angles and exhaust smoke in all directions.And changing the filter is quick and easy
12. QWORK Fume Extractor, Solder Smoke Absorber, Adjustable Angle Quiet Fume Extractor Fan -Extractors
By QWORK
- Adjustable: Can be used at various angles and exhaust smoke in all directions.
- Safety: It is removable, has a switch button, and is safe and effective.
- High-quality materials: QWORK Solder smoke absorber is made of anti-static material, long time service.
- Easy to use: changing the filter is quick and easy.
- Efficient: Keep close to the workbench to ensure that the fumes can be completely absorbed and the welding fumes can be quickly removed.
13. Solder Extractor Filter Activated Carbon Replacement, Pack of 6, Smoke Fume Absorber Filter -Extractors
By nobrand
- Activated carbon filters can remove most harmful soldering fumes and help create a healthy working condition
- Each activated carbon filter dimention is 13cm*13cm*1cm(5 1/8″ * 5 1/8″ * 3/8″)
- How often should you need to replace carbon filters? Generally, it can be used for 4-6 months according to the usage
- Fits for smoke absorber such as 493, FA-400, 426DLX, 456DLX, 486
- Extractor filter only, not include smoke absorber! Please feel free to contact us if you have any questions, we will reply within 24 hrs
14. 180° |Solder Fume Extractor| Solder Smoke Absorber| Fume Vape| Smoke Prevention Absorber| DIY Working Fan for Soldering| A noise-free Optimized 3000 RPM fan suction unit With a Replacement Filter -Extractors
By 180°
- Power Consumption & Free Replacement FilterTemperature range: -20°C to 60°C; power consumption: 120V, 30W (50/60Hz).It also comes with a Replacement Filter and It’s really easy to replace it.
- It is a portable and compact est Solder fume extractor with a noise-free Optimized 3000 RPM fan suction unit.
- Very compact and light-weightedThe greatest thing about the 180° Solder Smoker Absorber is that 0.4 inches thick activated filter absorbs and captures solder fumes effectively and helps to dissipation into the room.
- 2) Air Flow-Another way to get an idea of the performance of your solder smoke absorber is to check its airflow capacity.3) Warranty-While it does not affect the performance of your solder smoke absorber directly,
- How Do You Choose the Best Solder Fume Extractor?1)Power Rating- Since a solder smoke absorber has a fan inside, making sure that this fan is powerful enough for collecting all of the smoke is quite important
- Power RatingWhile it is decently powerful, its airflow rating is given in RPM and not in CFM
- WARRANTY and SERVICEProvides you with 24-hour email contact service & 30-day money-back guarantee
15. BAOSHISHAN Fume Extractor Soldering 3 Stage Filters Desktop Smoke Absorber Remover for DIY Soldering Work and Phone Repair -Extractors
By BAOSHISHAN
- It can support its own weight, can stay mid air without support
- Multiple filtration ensures your healthy.
- We will solve problems for you within 24 hours.
- Tube TELESCOPIC – The welding smoke sucker tube can be stretched and deformed at will
- It can be used at anywhere and only takes up a little space
- Application MORE – This fume extractor can be used in Soldering, DIY process, Maintenance of electronic products, Smart phone maintenance, Computer maintenance, etc
- REMEMBER to keep the fume extractor close to you work to ensure the fume be absorbed completely.
- Filter PLUS – Solder smoke absorber has 3 stage filter
- You can bend the tube to just about any position for your projects, the base weighs enough that it won’t fall over.
- If you have any questions, please contact us “alismile2014” and the host is “hotmail”
- The first layer of high-density filter screen preliminarily filters PM50, the second layer of High Efficiency Particulate Air dust collection filter screen filters PM0.5, and the third layer of activated carbon dust removal filter screen absorbs harmful gases
- Size MINI – The size of fume extractor is 185*185*85mm, small and convenient
- High purification rate allow you to breathe fresh air again and protect your respiratory tract and lungs
- Purification MAX – The solder fume extractor can rapidly purify, quickly absorb smoke within 1 second by adjusting the absorption rate
- It will not get in the way of your work and avoid the clutter of the workbench.
16. BAOSHISHAN Solder Fume Extractor 3 Stage Filters Strong Suction with Two Covers Smoke Absorber for DIY Soldering Welding Nail Salon Work (Rubber Cover, 110V) -Extractors
By BAOSHISHAN
- Truly no emissions.
- Our goal is to make you 100% satisfied.
- It has passed the environmental impact assessment test and certification, the purified air meets the hygienic standards
- 3-STAGE FILTER – The 3D filters has 4 times the dust holding capacity of the old one
- The upwind diversion design allows harmful particles and gases to contact the 3-stage filters more fully and evenly, making the filter element more efficient
- Each inner connecting section of the suction pipe has fine convex points, greatly enhance the stability and sealing of the pipeline, can be bent and fixed at any angle at will.
- WON’T TAKE UP SPACE – Our welding fume extractor’s size is smaller than A4 paper
- HIGHLY SEALED STRUCTURE – Our metal latches very tightly closed the main filter bulk, completely seal the fumes during operation to prevent any leak
- Suitable for small solder station and home DIY, 10.5×10.5×16 inch bulk can be stuffed under the table and won’t hinder your leg free and take up no space
- Also equipped with 4 quality universal wheels with buckles, convenient to move and fix at any station.
- Cotton filter, central High Efficiency Particulate Air filter and activated carbon filter absorb all smoke, dust and harmful gases at work
- Please feel free to contact us with any questions “alismile2014” and the host is “hotmail”
- High purification rate allow you to breathe fresh air again.
- 99.97% PURIFICATION RATE – BAOSHISHAN fume extractor can create a powerful 106 CFM airflow to exhaust and purify air
- OUTSTANDING CUSTOMER SERVICE – BAOSHISHAN provides 1 month returning for quality problems, 12-months warranty and online technical support
- We will solve problems for you within 24 hours
17. Solder Smoke Absorber, Smoke Prevention Absorber Fume Extractor Fan with Carbon Filter for DIY Working Soldering Desoldering Rework Station -Tools & Home Improvement
By Kulannder
- Including one replacement filter.
- Easy to Use: Unique design for disassembly, activated carbon filter can easy to be replaced at any time
- perfect for soldering project.
- Absorb Harmful Fumes: The filter consists of foam and activated carbon, which can absorb toxic fumes from solder, Prevent the smoke from emitting into the room, protect human health.
- Excellent Suction: The optimized fume extrator’s air flow is up to 110CFM/3080L/min, so it has stronger suction
- Anti-skid Design: The upgraded fume extractor has an anti-slip cotton at the bottom, which can be used to prevent slip and reduce vibration noise, giving you a quiet working space.
- Low-noise & Odourless: Soldering fan uses a double roller design, there is low-noise and odourless in the process of use, let you feel immersed in work.
18. Solder Fume Extractor Solder Smoke Absorber with 3X LED Magnifying Lamp and Flexible Arms DIY Working Fan for Soldering Station,3 PCS Carbon Filter -Extractors
By NOEVSBIG
- 360 Degree Alligator Clamps with Removable Silicone ProtectorsThe clips are stainless steel and have a strong spring
- ESD-Safe Design: The solder smoke absorber is made of ESD-safe materials.
- A handy carrying handle allows you to move the unit easily.
- 100% Satisfaction Service： Export products 100% quality inspection, all customers support 3 months of unconditional exchange or return policy and promise to provide a 3-year after-sales service.
- 3 IN 1 Solder Fume Extractor with 3X LED Magnifying Lamp and Flexible Arms Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
- Can be rotated 360 degrees then “locked” into place with knurled thumb nuts
- High-Efficient Absorb: Optimized 3300 RPM high suction fan is low noise, Strong absorption, effectively absorb the toxic fumes, air purification.
- Totally 30 illumination modes to meet all your requirements.
- They are strong to keep a tight grip on your components allowing you position them wherever you like.
- 3X Magnifier Lamp: Magnified 3 times real glass lens helps you to view details or tiny things, improves your work precision and efficiency, keeps your eye from the strain.
- Each lighting mode has 10 brightness dimming levels
- 3 Lighting Modes & 10 Brightness Levels – The LED Clip Lamp featured with 3 color temperature：warm light , warm–white light and white light
- Upgraded Design: Pure copper motor.The enclosure is made from metal.4 non-slip heavy-duty rubber feet anchor the unit to the ground
- Soldering Flexible Arms: 2 adjustable metal gooseneck arms, two 4.5″ arms helping hand arms, completely free your hands up and work easier than ever before.
- Easy to replace the filter: Includes two replacement filter.
19. HOMFAN Solder Fume Extractor Portable Desktop Small Silent Soldering Smoke Absorber Activated Carbon Filter Remove and Prevention Smelly Hazardous Fumes DIY Working Fan for Soldering Station -Extractors
By HOMFAN
- Easy to replace activated carbon filter, includes 2 replacement activated carbon filter
- If you have any questions, you can contact us at any time
- Handy carrying handle allows you to move the unit easily.
- Remove smelly and hazardous fumes: Featuring activated carbon filter, the fume extractor effectively absorbs and seizes fumes from solder, flux, chemicals, gases, and ease to overcome disturbing odors in your working spaces.
- Gifted 2 replacement activated carbon filter, easy to replace
- Optimized 3000 RPM high suction fan is silent and allows you to remove fumes 5-6 inches away
- Highly versatile: The high versatility of this fume extractor soldering fan enables you to stay relaxed and concentrated throughout Soldering, Wood-Burning (Pyrography), 3D Printing, Stained Glass, and Crafting, Nail Salons, Woodworking, Jewelry Making, and Smoking.
- Reminder – 1
- Working temperature: -20℃～60℃, Power consumption: 120V, 30W (50 / 60Hz).
- We will reply and solve your problem perfectly within 24 hours.
- 4 non-slip heavy duty rubber feet anchors the unit to the ground
- We will provide one-year free warranty
20. BAOSHISHAN Fume Extractor Soldering Solder 3 Stage Filters Smoke Absorber Desktop Smoke Sucker Remover Mini Size with Strong Suction for DIY Soldering Work -Extractors
By BAOSHISHAN
- Just open the metal lock to replace the filter separately and we will provide additional 4pcs pre-filters for free.
- It will not get in the way of your work and avoid the clutter of the workbench.
- Tube TELESCOPIC – The smoke sucker tube can be stretched and deformed at will
- The solder fume extractor can rapidly purify, quickly absorb smoke within 1 second
- The first layer of high-density filter screen preliminarily filters PM50, the second layer of H-E-P-A dust collection filter screen filters PM0.5, and the third layer of activated carbon dust removal filter screen absorbs harmful gases
- It can support its own weight, can stay mid air without support
- You can bend the tube to just about any position for your projects, the base weighs enough that it won’t fall over.
- High purification rate allow you to breathe fresh air again and protect your respiratory tract and lungs.
- Purification MAX – The BAOSHISHAN fume extractor creates a powerful air volume to exhaust and purify air
- Multiple filtration ensures your safety.
- It can be used at anywhere and only takes up a little space
- Filter PLUS – Solder smoke absorber has 3 stage filter
- Size MINI – The size of fume extractor is 153*153*76.5mm, it’s the size of a notebook
- Install EASY – The tube and fume extractor can be installed only by rotating counterclockwise according to the thread, which is 100% suitable
- Amazon Luna arrives on Samsung’s newest sensible TVs 2023
- 49 Best indoor tanning lotion with bronzer in 2023
21. VUAOHIY Fume Extractor Portable Solder Smoke Absorber With Spare Activated Carbon Absorbing Odors And Harmful Smoke Suitable For Soldering, Wood-burning, Fume Prevention Remover, Jewelry Work -Extractors
By VUAOHIY
- [Absorbing Irritating Odors] – The fume extractor can absorb odors and harmful smoke from soldering, nail salons, woodworking, jewelry work, stained glass, wood-burning, providing a safe and smoke-free working environment for you.
- [High-quality Material and Safe Design] – The dull polish surface of the extractor is made of high-grade ABS, which makes it very durable and sturdy
- It is easy for you to carry it everywhere you want.
- [Activated Carbon Filter] – This Portable Solder Smoke Absorber comes with 3 pcs filters which are made of features urethane foam and activated carbon
- Besides, with a carbon filter, it can absorb toxic fumes effectively instead of ventilating it away.
- [Package Includes] – In total: 1×Fume extractor, 3 X Activated carbon filters.
- And it is equipped with high-quality and five-blade fan, which provides strong suction and low noise.
- The filter captures and absorbs harmful smoke, ensuring a breathable and safe environment in your workspace
- [Versatile Working Modes] – The Fume Extractor can work efficiently in different environment by being placed vertically or horizontally
22. BAOSHISHAN Solder Fume Extractor 3-Stage Filters 147CFM Strong Suction with 2 Covers Smoke Absorber for DIY Soldering Welding Salon Work -Extractors
By BAOSHISHAN
- You can choose different diamond covers according to different sizes of PCB.
- The suction per unit power has been greatly enhanced
- FILTER PLUS+ – Three-layer filter effectively absorbs PM50, PM0.5 and harmful gases
- It only takes up a little space and will not get in the way of your work, avoid clutter in your work environment.
- The size of the black cover is 4.7 “x 8.7”, equal to a piece of A4 paper
- SMALL SIZE – The size of fume extractor is 265*265*475mm, suitable for small workbenches and home DIY, can be stuffed under the table
- The size of the transparent cover is 15 “x 10”, 3 times the size of A4 paper, which can greatly improve the smoking effect
- Multiple filters with larger dust capacity ensure your safety.
- Fume extractor use square vertical filter, which has 4 times larger dust capacitance than flat filter core
- The expanded area of the filter element can reach 2.1 m2
- When it runs, the noise is as low as running computer
- SUCTION UPGRADE – The power and suction have been upgraded from 80W to 130W, from 180m3/h to 250m3/h
- Solder fume extractor has 3-level speed regulation, you can control the speed of suction according to the amount of smoke
- But, the lowest level of our smoke absorber is only 45 dB, and the highest is not more than 55 dB
- 15’’x10’’ LARGE SMOKING AREA – The smoker is equipped with two aerodynamics diamond covers
- Only when you has a quiet and comfortable working environment, you can improve work efficiency.
- Never let fume float their way over to your face.
- SLEEP LEVEL MUTE – The higher the power will make the noise higher
23. KNOKOO Solder Fume Extractor HEPA Filter FES150 Welding Smoke Absorber Air Purifier 3 Stage Filter for Nail Salon Hair Salon and Soldering -Extractors
By KNOKOO
- Energy-saving and Environmental Protection KNOKOO fume extractor creates a powerful Systemic Flow 278m³/h to exhaust and purify air, high purification rate allow you to breathe fresh air again
- Solder Fume extractor FES150 has Wide range of applications: Smoke Removal, Dust Removal ,Laser smoke purifier, Harmful Gases Removal ,Beauty nail salon, Printing and Soldering;
- Three -layer filter Structure has larger dust capacitance than single-layer filter core, longer service time of filter core and more cost-saving.
- Frequency converter DC motor, less power consumption, smoke filtered and discharged into the air, in line with the requirements of environmental impact assessment, environmentally friendly.
- Multiple filtration system (3 layers) – KNOKOO fume absorber continuously exhaust the welding fume and lead mist, and rapid discharges it into the Pre-filter, HEPA filter and activated carbon filter to purifier smoke and unpleasant odors
- Handle On Both Sides With built-in handles on both sides, mobile devices are more convenient.
- 360-degree universal adjustable smoking duct – The suction pipe is composed of many shortened pipes and each interface can be bent freely, greatly improving the adjustment angle.Power Failure Protection: When the machine is working, turning off the three-in-one switch on the side will automatically cut off the power.
- each layer can be replaced separately
24. Adjustable Solder Smoke/Fume Absorber, Remove Fume Extractor Absorber Fan Quiet Working Fan with Adjustable Table Clamp for ESD Soldering Station Work, Eliminate Toxic Fumes helpful for Health -Extractors
By Kulannder
- ESD safe, great for electronics, arts and crafts, soldering station work.
- Portable and low noise, quiet and high-efficient fan.
- Super easy to set up and easy to replace filter.
- The powerful remove fume extractor absorber fan with adjustable arm and flexible table clamp, absorbing angle great for soldering station work.
- Sturdy Aluminium alloy material and long-lasting working time.
25. SXDOOL Solder Smoker Absorber Remover Fan with Speed Controller,Fume Extractor Smoke Prevention,120mm 120V Cooler Adjustable -Extractors
By SXDOOL
- High airflow cooling fans designed for Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber
- Dual ball bearing design allows the fan continuous operation 24/7 without too much of dust and high temperature concern and have a lifespan of 50,000 hours compare to sleeve bearing
- The filter is made of special foam with refined activated carbon, which has high suction and flux absorption properties.
- Features a fan speed controller so you can optimize the airflow and noise for your application.
- Great for mobile phone maintenance, great for soldering station work,electronics, arts and crafts, stained glass work, .
- Comes with 3pcs 120mmX120mmX3mm Active carbon filters,easy to replace
- Even more it allows the fans to be laid flat or stand.
26. Solder Fume Extractor Smoke Absorber for Soldering and Wood Burning, DIY Working Fan, Portable Prevention Remover with Activated Carbon Filter for Brazing Welding Soldering -Extractors
By Piwerod
- Super Adsorption Activated CarbonThis fume extractor can effectively absorb toxic solder and lead smoke during soldering and welding work
- Free Replacement FilterOur absorber DIY working fan comes with a Replacement Filter and It’s really easy to replace it.
- It can be used at anywhere and only takes up a little space
- It significantly reduces the amount of smoke emitted during soldering and ensures your safety.
- It will not get in the way of your work and avoid the clutter of the workbench.
- Suit For Any WorkbenchThe size of fume extractor is 110*155*215mm, perfect for standing on your DIY workbench
- Eliminates Irritating Odorsthe fume extractor effectively absorbs and seizes fumes from solder, flux, chemicals, gases, and ease to overcome disturbing odors in your working spaces.
- Smooth air outlet and low noise allow you to experience the comfort of smoke-free soldering work.
- Strong Suction But Low NoiseThis solder fume extractor is equipped with high-performance fan, optimized 3200 RPM high suction fan is low noise, strong absorption, effectively absorb the toxic fumes, air purification, provides strong suction and instantaneously absorbs the smoke generated
27. Solder Fume Extractor, 3-in-1 Smoke Absorber with Flexible Magnetic Arms Heat Insulation Silicone Repair Mat for Soldering DIY Working Station -Extractors
By EOOKU
- Magnetic Soldering Arms: Two 9″ adjustable gooseneck arms with a strong magnetic base, which have a powerful attraction to the steel base, Completely free your hands up and work easier than ever before.
- Silicone soldering mat: Insulation solder mat can resist the temperature as high as 806°F (430℃), fireproof and is anti-corrosive, anti-scratch and non be out of shape, the Silicone solder pad is perfect for soldering iron, repair cellphones, sports watch, camera, toys, eyeglasses and more small device.
- We proudly stand behind all of our products 100%, which is why we offer a Full 1 Year Warranty.
- Multi-functions: Solder Fume Extractor come with silicone repair mat，3 Stage Filter and 2 flexible soldering helping arms making simple repairs even easier, helps your repair or working perfect.
- Solder Fume Extractor: Pure copper motor, with 3300 RPM high suction fan is low noise, Strong absorption, the fume extractor effectively absorbs and seizes fumes from solder, flux, chemicals, gases, and ease to overcome disturbing odors in your working spaces.
- What You Can Get: 1 x solder smoker absorber, 1 x silicone soldering mat, 2 x magnetic helping hands, 2 x carbon filter
28. Weller WSA350 120v Bench Top Smoke Absorber -Extractors
By Weller
- Includes one replacement filter (WSA350F), ESD safe
- Great for workspaces using more active fluxes
- Fan is quiet and will not add significant noise to the workspace
- Removes flux fumes from soldering workbench
- Fumes are absorbed by the replaceable carbon-activated filter
29. Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber, 1-(Pack) -Extractors
By Hakko
- ESD-safe by design and is made of ESD-safe materials
- Can be operated standing up or laying down in a low-profile position
- Quick and easy filter replacement
- Activated Carbon filter contains over 8g of highly activated carbon
- Low profile position provides approximately 2-1/2 times the airflow and efficiency
30. KOTTO 5 Pack Set 0.4 Inch Thick Activated Carbon Filter for Solder Smoke Fume Ventilation Fumes Absorber, Fume Extractor Filters Solder Extractor Filter for Solder Smoke Absorber, Refills -Extractors
By Fstop Labs
- 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
- Stay safe and stop sucking on toxic smoke fumes.
- Better than the rest!
- US based customer support, 30 days full satisfaction no question asked return period.
- 5 Pack Set 0.4 inch thick activated carbon filter for Solder Smoker Absorber
31. Solder Fume Extractor Filter – MUIN 3 Stage Filtration Soldering Smoke Filter for Solder Smoke Absorber Remover,Including 1 Activated Carbon filter and 3 Pre-filter -Extractor Filters
By MUIN
- SOLDER FUME EXTRACTOR FILTERHigh-efficient Soldering Smoke Filter for Solder Smoke Absorber
- DIMENSIONS4.7×4.7×0.75 in | Weight: 0.2 lb
- 3 STAGE FILTRATIONIncludes a fabric pre-filter, an activated carbon filter and a photocatalyst filter which absorbs and captures fumes from solder, flux, chemicals, gases and helps to reduce unwanted odors and smells in your working spaces
- CONTIAN1 Activated Carbon filter and 3 Pre-filter
- GUARANTEED24-Hour Customer Support and 30-Day Money Back Guaranteed
32. Hakko FA430-KIT1 Smoke Absorber with C1571 -Extractor Filters
By Hakko
- Kit includes duct kit with rectangular nozzle
33. Solder Fume Extractor, NAKOOS 2-in-1 Smoke Absorber Remover Low Noise DIY Soldering Fan with Helping Hands 2 Spare Carbon Filter for Soldering Workbench Work Station -Extractor Filters
By NAKOOS
- Its optimized 3300 revolutions per minute fan provides great suction for removing solder fume
- It could work as a basic soldering station with soldering smoke absorbing function
- If for any reason you are not satisfied with your purchase, please contact us, customer satisfaction is our most important goal.
- Powerful Fume ExtractorThis ESD safe soldering fan can extract away the solder, flux, chemicals, gases or other hazardous substances in the solder smoke, and purify by the activated carbon filter net.
- 100% GuaranteedNAKOOS is the brand you trust for solder fume extractor fan
- Ideal for soldering, DIY and crafting.
- 2-in-1 Upgraded DesignThis Solder fume extractor is specially designed with 2 additional gooseneck arms
- And support 5000 hours lifetime.
- Strong Suction with Low NoiseThis Soldering Smoke Absorber has a pure copper motor
- Long-lasting ProtectionExtra 2 easily replaceable filter net could capture particle larger then 5 um, giving you good and timely smoke prevention filter supplements.
- We export products 100% quality inspection, all customers support 3 months of unconditional exchange or return policy
34. 2 Pack Set Replacement HEPA Filter for Solder Smoke Absorber -Extractor Filters
By KOTTO
- Replacement HEPA Filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
- US based customer support, 30 days full satisfaction no question asked return period.
- Replacement HEPA Filter for Solder Smoke Absorber.
35. GARDTOK Solder Fume Extractor for Soldering,Low Noise High Efficient Solder Smoke Absorber with Exra Carbon Filter -Extractor Filters
By Skyreat
- High-Efficient & Low Noise : With 3300 RPM Rotation rate and 45 dBA low noise ,Effectively absorb the toxic fumes,air purification.
- Product Specification: 6.69 x 2.99 x 5.1 (inch) | 2.5lb | Voltage:AC 110V, Rated current:0.22A
- Foldable Metal Handle: Convenience to move other place or storage ,Strong and Durable.
- High Quality Made: This solder fume extractor outer casing and Fan casing are made of metal, Motor made of copper, which working time can be last for several years.
- Three replace filters: Include extra two replacement carbon filters, which absorbs and captures fumes from solder,flux,chemicals and ect.
36. YaeTek Adjustable Solder Smoke Absorber Remover Bench Top Fume Extractor Carbon Filter Quiet Exhaust Fan for Soldering Station ESD-Safe 1000l/min -Extractor Filters
By YaeTek
- High- efficient absorb toxic gases Smoke, sodering fumes, flux smoke, odor to provides a safe working condition.
- Activated absorbing angle,
- Power supply: AC120, 60Hz
- Material: antistatic material,The filter consists of foam and activated carbon
- Size of Carbon filer : 5.1 inch * 5.1 inch * 0.4 inch
37. Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber for Soldering DIY Working Station -Extractor Filters
By NEWACALOX
- Pure Copper Montor: Optimized 3300 revolutions per minute Fan provide excellent smoke suction
- WEIJIANG Soldering smoke absorber/fume remover/smoke extractor prevention absorber DIY working fan can protect you away from poisonous smoke.
- Extra 2 easily replaceable filters give you good and timely smoke prevention filter supplements
- If for any reason you are not satisfied with your purchase, please contact us, customer satisfaction is our most important goal.
- WEIJIANG Ball bearing pure copper motor support 5000 hours lifetime
- 2 Replace Filters: The hazardous substances in the solder smoke purified by the activated carbon filter net
- ESD safe smoke Extractor fan with 0.4 inch thick activated carbon filter can extract away the solder, flux, chemicals, gases or other hazardous substances in the solder smoke.
- Upgraded Design: 4 non-slip heavy duty rubber feet anchors the unit to the ground
- Recommended filter net replacement every 4 to 5 months depending on usage.
- We export products 100% quality inspection, all customers support 3 months of unconditional exchange or return policy, and promise to provide a 3-year after-sales service
- Low Noise Fan with Smoke Filter: ESD safe smoke Extractor fan can extract away the solder, flux, chemicals, gases or other hazardous substances in the solder smoke, and purified by the activated carbon filter net.
- Handy carrying handle allows you to move the unit easily
- 100% Guaranteed: WEIJIANG is the brand you trust for fume extractor fan
38. 6 Pack Solder Extractor Filter Carbon Filter Replacement Activated, Smoke Fume Absorber Filter for Hakko/Xytronic/Aoyue Smoke Absorber 5 1/8” 5 1/8” 3/8” -Extractor Filters
By Kulannder
- Enough quantity and size: totally 6pcs carbon extractor filter, each carbon filter dimensions are 130mm*130mm*10mm(5 1/8” * 5 1/8” * 3/8”)
- Extractor filter only, not include smoke absorber!
Guarantee and Warranty: any quality issues, just contact us for refund or replacement. - How often should replace your carbon filter? Normally activated charcoal filters should last 4-5 months should replace a new filter
- Kulannder extractor filter replacement activated fits for Hakko Corporation 493 and FA-400, Xytronic 426DLX and 456DLX and Aoyue 486.
- This smoke fume absorber filter can take the smoke away very well, thick well made filter, works well for your fume extractor, homemade DIY fan.etc.
39. Solder Extractor Filter, ZEONHAK 24 Pack 6.1 x 6.1 x 1/3 Inches, Activated Carbon Filter Replacement, Solder Fume Extractor Filter for Capturing Fume, Odors, Gases, Chemicals -Extractor Filters
By ZEONHAK
- It is very suitable for various fume extractors and DIY handmade fans
- It can take away harmful smoke
- VALUE FOR MONEY – You will get 24 pack fume absorber filters to meet your various needs, so you don’t have to worry about them being insufficient
- MULTIFUNCTIONAL USES – The active carbon replacement filter is very suitable for capturing fume, odors, gases and other chemicals
- STRONG ADSORPTION CAPACITY – The solder extractor filter has good adsorption properties
- 100% GUARANTEE – If solder extractor carbon filter has any quality problems, you can request a full refund and return within 30 days after receiving the products
- You have no risk, click Add to Cart!
- With our products, you don’t have to work under the dangerous conditions of smoke and other chemicals.
- If you have any questions, please don’t hesitate to contact us at any time
- PREMIUM MATERIAL – Are you still looking for activated carbon filter that satisfy you? Our activated carbon filter is soft, and has strong adsorption capacity, low airflow resistance, excellent durability, long service life and good quality.
- Quality and customer satisfaction are our top priorities
- People who absorb these gases may cause headaches, vomiting, nausea and other health-damaging symptoms
- (fume extractors is not included)
- We recommend replacing the new filter every 4 to 5 months (if the product is used too many times, the replacement time should be shortened).
40. NAVASSU Solder Fume Extractor – Smoke Absorber, Air Purifier, 110-120V, Includes Wire Stand, Iron Stand with LED, Safety Glasses, Soldering Iron Tip Cleaner, and Heat-Resistant Silicone Mat -Extractor Filters
By NAVASSU
- Set up your workshop and enjoy your work, craftmanship or hobbie.
- QUIET AS A CONVERSATION – This solder fume extractor sound is below 55 dBA
- KEEP WORKING WITHOUT HUSSLE – Contact us if you have any questions about using this product
- WHAT YOU GET INSIDE THE BOX – When you purchase this solder fume extractor with three-layer filter, you will also find safety glasses, a wire stand, a heat-resistant silicone mat, an iron stand with led, and a soldering iron tip cleaner
- We will do everything to solve your problems as soon as possible.
- You can work without interruptions that may generate distraction or discomfort
- So, you can be sure that you are breathing cleaner air that is less harmful to your health.
- Use it in a soldering workstation, beauty salon or even at home.
- This solder fume extractor is compact to carry, and easy to install
- Remember that your solder fume extractor purchase includes a 1-year manufacturer’s warranty, so if your product has any issue, do not hesitate to write, or call us to act on the matter
- It means that is a safe noise level
- Duct length is 47 inches and can be easily adjusted for extra comfort.
- PORTABLE AND LIGHTWEIGHT – Its size (11x11x16.75 inches) and weight (19.8 lbs.) allow you to take it wherever you need to work
- BREATHE AIR, NOT FUMES – NAVASSU Solder Fume Extractor purifies the air and helps the gases generated by the welded metal to escape fast while you continue working
- Lifeless by Daylight’s ‘Hooked on You’ courting sim spin-off is out now 2023
- 48 Best anti fog safety glasses in 2023
41. Valtcan Fume Extractor Soldering Fan Smoke Absorber -Extractors
By Valtcan
- Pull filter guard out to remove filter and replace with new one
- Powerful Fume extractor removes Smoke fume, soldering fumes, flux smoke, odor from soldering stations, workstations, nails, glasswork, pyrography, paint etc quick, safely and efficiently.
- Twist knobs at two ends to loosen and then adjust tilt of smoke absorber
- Solder Flux fume extractor fan 496 model equivalent to the 493 plus extra filters
- Low noise and high- efficient fan operates at acceptable db levels in solder workstations.
- Adjustable tilt for optimum solder smoke absorption angle from your workbench
- On/off button located in back of smoke absorber fan
- Fasten knobs to secure fan front when desired tilt is obtained.
- Made of ESD safe material, lightweight and durable material
- Comes in 493 model box with extra filters.
- Comes with 3 Active carbon filters, Easily replaceable by swamping out old for new one in the filter slot
- Then push back filter guard to hold filter in place.
- Plugs into AC socket for power
42. Xntun 8 Pack Solder Fume Filter Carbon Filter Replacement Activated,Smoke Fume Absorber Filter 5 1/8″ x 5 1/8″ x 3/8″ -Extractors
By Xntun
- Include 8 Pcs carbon filter, not include smoke absorber!
- Carbon filter replacement activated fits for Hakko Corporation 493 and FA-400, Xytronic 426DLX and 456DLX and Aoyue 486 etc.
- Carbon filter dimensions are 130mmx130mmx10mm(5 1/8″ x 5 1/8″ x 3/8″).
- How often do you replace carbon filters?It is recommended to replace the carbon filter every 4-5 months according to the usage situation.
- This smoke fume absorber filter can take the smoke away very well, works well for your fume extractor, homemade DIY fan etc.
43. TECHTONGDA Solder Fume Extractor Welding Smoke Absorber Industry Remover Filter Single Arm 220V -Extractors
By TECHTONGDA
- PTFE FilterThe cartridge filter is made of PTFE,with high precision, excellent filtration effect and long service life
- Strong SuctionAdopt multi-wing centrifugal fan which has strong suction capacity
- Pulse ash spraying is adpoted and the filter will be cleaned automatically.
- The airflow reaches 13984c.f./h.
- ApplicationThis welding fume extractor is designed for industrial smoke and light particles in welding, which can effectively remove the welding fume and waste gas and can degrade the welding fume smell of tar and various bad gases.
- One Suction ArmThe suction arm can rotate 360 degree, increasing absorbing area.The welding fume extractor has one suction arm and the filtering area can reach 59 sq ft.
- Excellent DesignLow-noise design will provide you quiet working environment
- The noise is lower than 75DB.Cardan wheels make it easy to be moved, improving working efficiency.
44. X-Tronic Model #DFX-300 • Soldering Iron Station Dust Free Solder Fume Absorber Remover Extractor • Adjustable Speed • Work Light • Silicone Work Mat • Antistatic Alligator Clip • Lint Roller! -Extractors
By X-TRONIC
- PRODUCT FEATURES: The X-Tronic Model #DFX-300 is a Professional Dust Free Room Designed with Advanced Repairmen in Mind, yet is Simple Enough that a Novice will have No Problem using it
- The 3-year warranty is included in the product price when purchased new from XTronic USA, no additional warranty purchase is required
- ALL X-Tronic Products come with a 30-Day Unconditional Money Back Guarantee which also includes a 3-Year Warranty with the Cost of Parts and Labor Included
- The Alligator Clip Ensures there will be no Static Build Up & will Keep your Devices Safe
- The X-Tronic Model #DFX-300 is a Professional Dust Free Room that comes Equipped with 2 Fans on Top to Blow away All Troublesome Dust and Debris, and 2 Exhaust Fans in the Back of the Unit to Pull out Any other Small Particles that the Main Fans don’t
- This Unit has a Very Spacious Work Area, & has a Glass Screen to Keep Unwanted Particles from Entering the Work Area
- The Antistatic Alligator Clip mixed with the Aforementioned Features & Work/Dust Detection Lights will keep your Repairs Safe.
- The Voltage is 110/120 Volt – 60 Hz.
- When the Fans are Turned to the Highest Setting the Max Air Speed is 5 Meters per Second
- INCLUDED: The Main Power 40 Watt Dust Free Room – 18.50”L x 15.25”W x 10.25”H, Versatile Silicone Work Mat – 15.625”L x 15.375”W, Antistatic Alligator Clip, and a Lint Roller for Removing Excess Dust and Debris Before Using this Unit.
- SPECIFICATIONS: The X-Tronic Model #DFX-300 Filters are Rated to Keep any Particles 0.3 Microns or Larger out of the Fan and your Work Environment
- This Unit will Keep your Workspace Free of Dust & Debris while you repair Phones, Tablets, etc
- The X-Tronic Model #DFX-300 also comes w/ a Silicone Mat, Adjustable Air Output, and an Adjustable Work/Dust Detection Light.
- The Working Environment is 32°F – 104°F / 0°C – 40°C, the Storage Environment is -4°F – 176°F / -20°C – 80°C and the Storage Humidity is 35% – 45%
- PLEASE SCROLL DOWN THIS PAGE FOR MORE INFORMATION ON THIS PRODUCT!
45. DOOPICHA Solder Fume Extractor Smoke Absorber Remover Strong Suction Hose Electric Iron Welding and Wood Burning, 3D Printing Extractor, Carbon Filter [LED Attached] -Extractors
By DOOPICHA
![DOOPICHA Solder Fume Extractor Smoke Absorber Remover Strong Suction Hose Electric Iron Welding and Wood Burning, 3D Printing Extractor, Carbon Filter [LED Attached]](https://m.media-amazon.com/images/I/31yCGeGt-DL._SL500_.jpg)
- [ELIMINATES ODORS AND SMOKE] HEPA filter combined with carbon 3 Stage Filter, effectively absorbs and seizes fumes from solder, flux, chemicals, gases, and disturbing odors
- [MORE APPLICATION] ZacaSuction can be used for Soldering, Wood-Burning (Pyrography), 3D Printing, Stained Glass, and Crafting, Nail Salons, Woodworking, Jewelry Making, and Smoking.
- [FLEXIBLE SUCTION HOSE] 22-inch hose, Fume hood can adjust direction according to actual needs.
- [STRONG SUCTION WITH SLIGHT NOISE] The predominantly optimized soldering fan empowers you to remove fumes even 4-5 Inches away with minor noise
- [ATTACHED LED (Brightness adjustable)] Circular LED attached on suction hose maximizes user convenience and workability.
- The absorption rate is adjustable by adjusting the rotary switch to control the absorption intensity.
- It ensures your safety.
46. 5 Pack Activated Carbon Solder Fume Extractor Filters, Fan Smoke Absorber Filter Replacements Sponge, Compatible for Hakko/Xytronic/Aoyue/Flexzion/Valtcan 493 496 FA400 Series (5.12×5.12×0.39inch) -Extractors
By QINIZX
- Activated Carbon Charcoal Replacement Filters for Solder Smoker Absorber/ Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station.
- Not include smoke absorber! Each carbon filter sponge dimensions are 130mm*130mm*10mm (5 1/8” * 5 1/8” * 3/8”)
- Replacement Carbon Pre Filters are treated with oxygen and designed to captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room
- With good adsorption performance, it can be used for air purification.
- How often should replace your carbon filter? It is recommended to replace the activated charcoal filters every 4-5 months according to the usage situation
- Easy to replace, disposable, no tools required.
- Perfect Compatible for Hakko Corporation 493, Flexzion 493 Solder Fume Extractor Smoke Absorber, and Valtcan Smoke absorber 493/496, FA-400, Xytronics 426DLX/456DLX, Aoyue 486 series models, and homemade fans etc.
- Package contains 5pcs carbon extractor filters, enough quantity keeps you stocked
47. Flexzion Solder Fume Extractor Smoke Absorber – Benchtop Flux Fume Air Filter Exhaust Fan Ventilation System Portable Adjustable Angle with Activated Carbon Filter for Soldering Bench Top Work Station -Extractors
By Flexzion
- Adjustable absorbing angle; Fan is made of anti-static material, low noise with high suction efficiency
- Solid and sturdy, well-constructed for long hours of working time
- One ESD-safe carbon activated replacement filter included
- Fumes and toxins are absorbed and stored by the carbon-activated foam to create a safer working condition
- For workspaces where active fluxes are used; Removes flux fumes from soldering workbench; Great for people working with electronics, arts and crafts, and stained glass
48. Wadoy Adjustable Fume Extractor Solder Smoke Absorber with 6 Pcs Active Carbon Filters, 110V 30W 493 Solder Iron Smoke Absorber Welding Fume Extractor Quiet Fan for Soldering Station -Extractors
By Wadoy
- Solder Smoke Absorber: Voltage: 110V, Maximum air flow: 1000L/min, Injection port concentration: 2 (mg/L)
- Easy to move, suitable for your DIY welding work.
- Adjustable Angle: The fan is adjustable, which enables it to suck smoke from different angles
- Normally the filter needs to be replaced every month.
- absorbing weight of components per one filter: 4g
- Package Includes: 1x soldering smoke absorber + 6x active carbon filters + 1x manual (You also can download the electronic English manual directly)
- Active Carbon Filters: Size: 13x13x1cm/5.1×5.1×0.4 in
- High Quality: Made of antistatic material, low noise and high-efficient fan, safety used for purifying fumes during the electronic soldering
- Durable and easy to operate.
- This 493 ESD safe smoke extractor soldering absorber can effectively absorb welding smoke, provide a safe working condition.
49. LQ Industrial Activated Carbon Filter 5PCS 4.7 x 4.7 x 0.3 inch Solder Smoke Fume Absorber Activated Carbon Filter Sponge Fume Extractor -Extractors
By LQ Industrial
- Size: 12cm(4.7in)x12cm(4.7in)x8mm(0.31in).
- Effectively prevent the absorption of toxic flux and lead fumes, deep purification and filtration, high-efficiency adsorption of activated carbon, giving you a comfortable and clean environment.
- Be used for working fans of DIY welding station with solder smoker absorbent/smoke remover/smoke preventing absorbent.
- Suitable for Flexzion 493 solder fume absorber and Valtcan fume absorber 493/496, FA-400, Xytronics 426DLX / 456DLX, Aoyue 486 series models and self-made fans, etc.
- Material: Sponge.Packing: 5 pcs
50. Poafamx Fume Extractor Solder 152CFM Adjustable Suction with 3 Stage Filters Smoke Absorber for Soldering Welding DIY Work 110V -Extractors
By Poafamx
- [GREAT FOR SMALL WORKBENCH] The size of fume extractor is 280*250*280mm, it’s about the size of A4 paper
- It is not necessary to adjust the suction to the maximum
- It only takes up a little space and will not get in the way of your work, you can place it as you like.
- [SUPER PURIFICATION] The 100W Poafamx fume extractor creates a 152 CFM airflow to absorb smoke, dust, harmful gas and purify air
- The purification rate is up to 99.998% which allows you to breathe fresh air again and no more headache.
- The dust capacitance of 3-layer tower filter structure is 4 times that of ordinary single-layer filter core, each layer can be replaced separately.
- Just adjust according to your smoke and dusty.
- [UNIVERSAL SLUB TUBE] The fourth generation smoking tube is used in our fume extractor, which can extend or shorten the tube length at any time and adapt to various worktops
- You can put it on the table or under the table, suitable for small workbenches and home DIY
- [3-LAYER TOWER FILTER STRUCTURE] Solder fume extractor has 3 stage filter – Cotton filter, central H-E-P-A filter and activated carbon filter
- The high sealing of the tube ensures small wind resistance and 100% smoke absorption.
- [KNOB TO ADJUST SUCTION] Knob adjustment can continuously adjust the suction
Best Brands
Buying a product from a reputable manufacturer that provides high brand value is one of the most essential things. Based on my research, here are the top brands that make the best solder fume extractor.
- Fstop Labs
- KOTTO
- 180°
- SainSmart
- MUIN
- Antidious
- NOEVSBIG
- Toolour
- KNOKOO
- Anztek
The Buyer’s Guide
Although the aim of this list is to help you choose the best option for your needs. This guide shall help you make an informed purchase decision. Here are the few things to consider when choosing a solder fume extractor.
1. Features
There’s no point in purchasing a solder fume extractor that doesn’t solve your usage needs. Sometimes, even the best option wouldn’t have all the options you’d need. That’s why list down all your feature requirements and make sure that the option you’ve chosen comes with all of them.
2. Budget
Budget plays an important role, if it wasn’t for the budget, wouldn’t everyone purchase the most expensive option? However, before you decide the budget, I’d recommend you to make a list of features you’d need. In case a feature you need the most isn’t available in your budget range, then there’s no point in buying it, is there?
My advice is to make sure that the product has all the features you need then decide the budget. If a product you’ve chosen isn’t having all the features you need, then you should consider increasing your budget.
3. Value For Money
There are times when you shall come across various solder fume extractor that shall have all the features you need. However, the price difference shall exist. In a situation like this, it is recommended to value each feature and make sure that you’re not overpaying for a feature you wouldn’t use.
4. Brand, Customer Support, & Warranty
Purchasing a product from a reputed brand is very important. Not only does it guarantee high-quality build, but you also get much better customer support.
You should also make sure that it has a decent warranty, it is really helpful in case a product breaks down due to manufacturing defects. Also, repairs during warranty are generally free of cost (depends on service terms).
5. Individual Product Reviews
You don’t have to watch individual reviews of each solder fume extractor in this list. However, pick 2-3 options that have all the technical aspects according to your usage needs. Once you’re ready with it, go to YouTube/Amazon and look at video/customer reviews to make sure that the existing buyers are satisfied with the product.
The FAQs
Which is the best solder fume extractor?
According to my research, the KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station is the best option.
Is Fstop Labs a reliable brand?
It’s one of the best brands, not only does it make the top-rated solder fume extractor, but it also is known for its exceptional service.
Which is the cheapest yet powerful solder fume extractor?
According to me, the Solder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter is one of the cheapest options available and yet has all the features.
Are there deals going on?
A few of the options in our article are currently available for a discounted price. However, check out the product listing to find more information.
What brands should I consider when purchasing?
Based on my research, these are the top 5 brands: Fstop Labs, KOTTO, 180°, SainSmart, and MUIN.
Should I buy it online or go to an offline store?
Shopping online comes with a few advantages such as discounted pricing, quick delivery at home. However, if you’re in a hurry or can find the product for a cheaper price in the offline market, consider visiting the offline store.
The Verdict
Choosing the right product isn’t easy and for many of them it could be a time consuming task. However, with this guide, my aim is to help you guys find the perfect solder fume extractor for your needs.
I’ve done a huge research to ensure that options I’ve listed are among the best. Like mentioned above, I also interviewed many experts to make sure that the enlisted models are high quality.
I hope that you’re able to find the right solder fume extractor for your usage. If you are still struggling to find one, feel free to comment below or contact me.
