We are supported by readers, when you click & purchase through links on our site we earn affiliate commission. Learn more.

49 Best torque converter for mini bike in 2022: According to Experts.

You could get any random torque converter for mini bike, but if you’re looking for expert advice on choosing the best one for your needs then you’ve arrived at the right place.

It doesn’t matter what your torque converter for mini bike needs are or what your budget is, because I’ve done an in-depth analysis to include the best-rated options suitable for diversified usage needs and different budget ranges.

To make this list, I’ve spent 76 hours researching torque converter for mini bike from the best brands such as: GM, Auto Express, AcPulse.

Note: Make sure that option you’re choosing has all the features you need. Afterall, is there any point in purchasing something that’s not usable?

49 Best torque converter for mini bike in 2022: After 76 Hours of Research

To make this list an unbiased resource for choosing the best torque converter for mini bike, I contacted 14 experts and discussed various aspects to consider. After a huge discussion, I went across customer reviews, researched the reputed brands, and a lot of other things. Because my aim is to recommend products that are highly value for your money.

1. 212CC Torque Converter 6.5 HP 3/4″ Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set – 30 Series -Automotive

By IPARTS EXPERT

  • It fits all engines with a 3/4″ Straight Crankshaft
  • Replaces Comet, Also Fits Manco Go Karts.
  • Brand new predator 212cc 6.5 hp go kart torque converter clutch kit This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series
  • Center to Center of driver and driven: 6-15/16 to 7″.
  • TAV2 30 Series Go Kart Clutch KitThis torque converter fits a 3/4″ shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain
  • 30 Series Toruqe Converter Belt for 6″ Driven Length: 70.5cm / 27.76″, Outside circumference: 27 23/64″ , Width is 3/4″.(1.9cm / 0.75″)
  • This clutch will help you get more power out of your small engine by reducing engine load A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
  • Bring your off-road machine to life.
  • 30 series Asymmetrical design
  • For your convenience this kit comes with1 x 3/4″ Driver Pulley;1 x 5/8″ Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware
  • Note This is not made by Comet
  • It will work with small engines producing 2-8hp

2. CXRCY Torque Converter 3/4″ 10T #40 41 420 Chain 212CC 30 Series Go Kart Mini Bike Clutch Comet TAV2 30-75 Engine Drive Replacement Set -Automotive

By CXRCY

  • It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed.
  • Widely FitmentFits All engines with a 3/4 inch straight crankshaft, Go Karts 30 Series and 2HP-7HP engine with 3/4″ Shaft with flat key.You can use on motorcycle,go kart ,mini vehical and etc.Notice:The bolts are metric bolts.
  • Replace Part NumberComet 219552A,203814A,219456A,218353A,TAV2 30-75.
  • High Quality MaterialsOur Torque Converter is made of high quality iron and aluminum materials, light weight, durable
  • Full-Set EquipmentThis kart torque converter kit includes the main parts: a 3/4″ driver pulley and a 5/8″ driven pulley,and includes other accessories like drive belt,plastic assy cover,aluminum mounting bracket plate,and full mounting hardware kit
  • With 1 Tooth Sprocket1 x 10 Tooth Sprocket for #40/41/420 Chain.

3. MOOSUN Torque Converter Go Kart Clutch Set 3/4 inch 12T #35 Chain Replace for Manco Comet TAV2 Mini Bike -Automotive

By MOOSUN

  • This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware.
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches, fit all engines with a 3/4 inch straight crankshaft.
  • Driver clutch bore: 3/4″(16mm), Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , Belt Top Width: 19mm(3/4″), Sprocket teeth: 12 teeth for #35 chain
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
  • Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75

4. 212CC Torque Converter Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40/41/420 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter -Automotive

By Ameetaa

  • Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine
  • Package Included: 1 x 3/4″ Driver clutch bore, 1 x Overall Diameter 6″ (5/8″ driven pulley), 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included), 1 x Drive belt, 1 x Plastic Assy Cover, 1 x Full Mounting hardware Kit, 1 x Aluminum Mounting Bracket Plate
  • (As Pictures Shown)
  • Replace Part Number: Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, 203814A 30-75
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton and clones, Kohler, Lifan, Robin, and Tecumseh motors
  • Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
  • 3/4″shaft with flat key

5. Mophorn 212CC Torque Converter CVT Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40 or 41 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter -Automotive

By Mophorn

  • Center to Center of driver and driven: 6.7″(17cm / 6.7″).
  • Complete Accessories: The torque converter clutch includes: 1x 3/4″ drive clutch; 1x 5/8″ drive clutch; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; full mounting hardware
  • Unit Replaces: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.Replaces for Comet Manco Go Karts.
  • Compatible with 212CC 2HP-7HP GO KART Torque Converter: This go-kart torque converter clutch kit is made of high-quality iron and aluminum materials, lightweight, sturdy and durable; it can reduce the engine load and get more power.
  • Fully equipped, worry-free installation.
  • 30 Series GO KART Clutch Kit: This kart torque converter has a 3/4″ and a 5/8″ drive clutch, suitable for all engines with 3/4 “straight crankshaft.The 3/4″ drive clutch contains a 10 tooth sprocket for # 40/41 chains.The Belt length: 70.5cm / 27.76″, Outside circumference: 27″(68.8cm / 27″), Width is 3/4”.(1.9cm / 0.75″)
  • High Adaptability: This go-kart torque converter is fully compatible with Comet and TAV2 torque converters, widely used in riding lawnmowers, small tractors, karts, miniature bicycles, miniature choppers, all-terrain Cars, motorcycles, and water skies.

7. Mophorn Torque Converter CVT 2HP-7HP 3/4″ Go Kart Clutch 212CC 30 Series Mini Bike 10T #40 41 Chain and 12T #35 Replacement Set TAV2 30-75 218353A Manco CVT Clutch Small Engine Drive Belt -Automotive

By Mophorn

  • 1 x 5/8″ bore driven pulley
  • 1 x aluminum mounting plate
  • 1 x driver belt
  • Updated Durable Belt: The new type of belt, go-kart asymmetrical belt 669, is one of the highlights for our torque converter for go-karts
  • The asymmetrical type system can reduce engine load and gain more power to bring your off-road machine back to life.
  • Quality Drive Clutch: We have a 3/4” Driver Pulley and a 5/8” bore driven pulley
  • 1 x plastic assy cover
  • Vehicle Fitment: The torque converter is compatible with 3/4″ & 5/8″ straight crankshaft
  • Modified TAV2/30 Series: Our go-kart torque converter is the latest TAV2/30 asymmetrical series
  • They are made of aluminum and steel
  • Using this excellent elastic belt properly can improve the life span of your torque converter.
  • And it also can fit for 4-8 hp small torque converter systems.
  • You can usually use it on 4-8 hp go-karts and motorbikes.
  • Full Accessories: Our torque converter clutch has full accessories: 1 x 3/4″ driver pulley
  • 1 x full mounting hardware.

8. munirater 30 Series Torque Converter Clutch 5/8 ID 7 Diameter Driven Clutch Replacement for Go Kart Mini Bike 217610A -Torque Converters

By munirater

  • Replaces Part Number – Comet 217610A.
  • Up to 8HP – The torque converter clutch is designed for small engines with up to 8hp.
  • Package Includes – 1 x 30 series torque converter clutch.
  • Fits Models – 30 series asymmetrical driven clutch with 3/16 key way, 7 diameter and 5/8 bore driven replacement for Mini Bike Go Kart Lawnmower.
  • Premium Quality – The 30 series torque converter driver clutch is made of premium quality iron material, which is lightweight, portable, sturdy, durable, larger torque, wear – resisting and fast heat dissipation.

9. MOOSUN 30 Series 6.5 HP Go Kart Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4″ Bore 10T #40/41/420 China (Complete 3/4″ Torque Converter Set) -Automotive

By MOOSUN

  • Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75
  • Driver clutch bore: 3/4″(16mm), Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , Belt Top Width: 19mm(3/4″), Sprocket teeth: 10 teeth for #40/41/420 chain
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches, fit all engines with a 3/4 inch straight crankshaft.
  • This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware.

10. Torque Converter Go Kart Clutch Set 3/4″ 10T 40/41 and 12T 35 Chain for Manco Comet TAV2 (30 Series) -Automotive

By Megaflint

  • Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75
  • Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
  • Driver clutch bore: 3/4″(19mm),Driven unit: Overall Diameter 6″ (5/8″ driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain
  • This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware.
  • Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.

11. MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4″ COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420 -Automotive

By MOOSUN

  • Note This is not made by Comet
  • It fits all engines with a 3/4″ Straight Crankshaft
  • Bring your off-road machine to life.
  • The Belt Feature Length: 70.5cm / 27.76″, Outside circumference: 27 23/64″ , Width is 3/4″.(1.9cm / 0.75″)
  • 30 series Asymmetrical design
  • Go Kart Torque Converter Kit comes with1 x 3/4″ Driver Pulley;1 x 5/8″ Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware
  • It will work with engine sizes hp2 to 8hp
  • For your convenience this kit comes with both sprocketsThis torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain
  • Center to Center of driver and driven: 6-15/16 to 7″.
  • Replaces Comet, Also Fits Manco Go Karts.
  • 30 Series Torque Converter Clutch Kit This 3/4″ Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A
  • Special functionThis clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.

12. Torque Converter Go Kart Clutch 3/4 inch 10T 40/41 & 12T 35 Chain Drive Belt Pulley Replace for Manco Comet TAV2 Mini Bike, 30 Series -Automotive

By MOOSUN

  • 30 Series Torque Converter Clutch Kit This 3/4″ Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A
  • Bring your off-road machine to life.
  • Go Kart Torque Converter Kit comes with1 x 3/4″ Driver Pulley;1 x 5/8″ Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware
  • Replaces Comet, Also Fits Manco Go Karts.
  • Special functionThis clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
  • Center to Center of driver and driven: 6-15/16 to 7″
  • 30 series Asymmetrical design
  • The Belt Feature Length: 70.5cm / 27.76″, Outside circumference: 27 23/64″ , Width is 3/4″.(1.9cm / 0.75″)
  • For your convenience this kit comes with both sprocketsThis torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain
  • It will work with engine sizes hp2 to 8hp
  • Note This is not made by Comet
  • It fits all engines with a 3/4″ Straight Crankshaft

13. BLACKHORSE-RACING Go Kart Torque Converter for Predator 6.5HP 212CC Clutch Set Replaces Comet TAV2 3/4 Inch 30-75 Manco Fit All Engines with a 3/4 inch Straight crankshaft -Automotive

By BLACKHORSE-RACING

  • ▲ Fits: All engines with a 3/4 inch straight crankshaft
  • ▲ Made of high quality iron and aluminum, sturdy and durable
  • It fits all engines with a 3/4 inch straight crankshaft and it’s suitable for Go Karts 30 series.
  • ▲1x 12 Tooth Sprocket for #35 chain;1x 10 Tooth Sprocket for #420 /#40 /#41 chain
  • ▲ Length: 70.5cm / 27.76″, Outside circumference: 27 23/64″, Width is 3/4″.(1.9cm / 0.75″), Center to Center of driver and driven: 6-15/16 to 7″
  • ▲ This kit is made of high quality iron and aluminum, which is sturdy and durable

14. 3/4″ 30 Series Torque Converter Replacement 212CC Comet TAV2 12T #35 & 10T #40/41/420 Chain, Compatible with Go Kart ATV Mini Bike Lawnmower Tractor with 6.5HP Engine -Automotive

By RYANSANS

  • Powerful Function – The 30 Series torque converter acts like a gearbox, allowing your small engine to obtain higher speeds and achieve smoother acceleration
  • Buying RYANSANS products will enjoy a one-year warranty and customer service, you can buy products with peace of mind.
  • This clutch kit will help you get more power from a small engine by reducing the engine load, allowing you vehicle to start faster and drive more efficiently.
  • Replaces Comet, also fits Manco Go Karts.
  • Buy With Confidence – If you are not satisfied with the product, please contact us by e-mail and we will solve the problem immediately
  • Direct Replacement – This torque converter driver clutch bore: 3/4″, you can choose 10 tooth sprocket 40/41/420 chain or 12 tooth sprocket for 35 chain(10 tooth sprocket has been installed)
  • Package Includes – This is a complete Go Kart Torque Converter Kit, including drive and driven clutch pulleys, aluminum engine mounting plates, built-in intermediate shafts with sprockets, belts, and all mounting hardware (not including chains).
  • Wide Compatibility – 212cc 30 series torque converter kits are widely used in go karts, mini bikes, small vehicles, riding lawnmowers, small tractors, mini copters, motorcycles, ATVs, suitable for all engines with a 3/4 inch straight crankshaft
  • Use with a small engine that produces 2.5-8.5HP to make your off-road machine more dynamic.

15. New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4″ Bore Max Torque -Automotive

By IPARTS EXPERT

  • It fits all engines with a 3/4″ Straight Crankshaft
  • Recommended engine: 2HP-8HP
  • This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series
  • Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch
  • Featuring 6″ diameter with 3/4″ Bore, 3/16″ Key way
  • This clutch will help you get more power out of your small engine by reducing engine load.
  • It is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car.
  • This driver clutch is designed to work with a belt and driven pulley assembly
  • Replacement for Go Karts 30 series Engine Comet Manco, 3/4″ bore designed for 6.5hp 212CC engines
  • Replaces Comet, Also Fits Manco Go Karts
  • With fine workmanship, this clutch can function well exactly as same as the original one.
  • Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
  • It is produced by the sophisticated technology
  • Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.

16. LAFORMO 212CC Torque Converter 6.5 HP 3/4″ Go Kart Mini Bike Comet Clutch 12T 35 Chain Predator Driver Pulley Replacement Set – 30 Series -Automotive

By LAFORMO

  • Engagement range is approximately 2350±200 RPM
  • With both sprockets: 12 tooth sprocket for a 35 chain.
  • fits 6.5HP engines with a 3/4″ Straight Crankshaft, unique engine bolt kit for predator engines and the correct anti vibration pilot washer.
  • small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration
  • 1 year warranty

17. 30 Series Go Kart Torque Converter Clutch 3/4″ Bore Mini Bike Clutch Driver Pulley Compatible for Comet Manco Max Torque -Automotive

By Ameetaa

  • Work with: 10 Tooth Sprocket for #40/41/420 Chain; 12 Tooth Sprocket for #35 Chain (Tooth and Chain aren’t included)
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
  • 3/4″ bore designed for 6.5hp 212CC engines
  • Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
  • Compatible for Go Karts 30 series Engine Comet Manco

18. EASYBERG 30 Series Torque Converter 5/8″ Clutch 6″ Driven Asymmetric Go Kart Mini Bike Replaces Comet 219457A -Automotive

By EASYBERG

  • Quality Oem Replacement Parts
  • 8hp Max Vreplaces: Comet 219457A
  • 30 Series Torque Converter,5/8″ Shaft Bore,6″ Diameter
  • Package Includes:1x 30 Series Torque Converter
  • Fitment:Mini Bike, Go Kart,Lawnmower

19. 30 Series 6.5 HP 212CC Torque Converter Clutch Driver Pulley Go Kart/Mini Bike Comet Manco 3/4″ Bore Max Torque Replaces,with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589 -Automotive

By YOHIB

  • 30 Series Torque Converter and Go Kart Drive Belt :New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC
  • Go Kart Drive Belt: 30 Series Go Kart Drive Belt torque converter belt Replaces For manco 5959/comet 203589 murray 12-8487 baja Motorsports BB65-395 ken-Bar 300-009 255-299 rotary 8487
  • Width: 0.4″, Length: 27-1/32″.
  • Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.3/4″ Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589.
  • Torque Converter:This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series.
  • Recommended engine: 2HP-8HP
  • Wide Use–go kart clutch belt: The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.Center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch.
  • Wide Use–torque converter 3/4: Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc.

20. BSHWKP 212CC Torque Converter 6.5 HP 3/4″ Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set – 30 Series -Automotive

By BSHWKP

  • Center to Center of driver and driven: 6-15/16This 3/4 inch Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A
  • Fit type: Universal
  • Part number: AMSHMK0004
  • [TORUQE CONVERTER BELT FOR 6 inch DRIVEN]-Length: 70.5cm / 27.76 inch , Outside circumference: 27 23/64 inch , Width is 3/4 inch .(1.9cm / 0.75 inch )
  • It fits all engines with a 3/4 inch Straight Crankshaft
  • Replaces for Comet Manco Go Karts to 7 inch
  • [PREDATOR 212CC 6.5 HP GO KART TORQUE CONVERTER CLUTCH KIT]-Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75
  • Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine
  • [SPECIAL FUNCTION]-This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
  • It fits all engines with a 3/4 inch Straight Crankshaft
  • 3/4 inch shaft with flat key.
  • [TAV2 30 SERIES GO KART CLUTCH KIT]-This 3/4 inch Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A
  • Replaces for Comet Manco Go Karts
  • [FOR YOUR CONVENIENCE THIS KIT COMES WITH]-1 x 3/4 inch Driver Pulley,1 x 5/8 inch Driver Pulley, 1 x Plastic Assy Cover,1 x Aluminum Mounting Plate,1 x Drive Belt, 1 x 10 Tooth Sprocket for #40/41/420 Chain, 1 x 12 Tooth Sprocket for #35 Chain(Chain not included), 1 x Full Mounting Hardware.

Related Posts :

21. 30 Series 6.5 HP Go Kart Torque Converter Driver Clutch Mini Bike Clutch Driver Pulley Replaces Comet Manco 212CC 3/4″ Bore Max Torque -Automotive

By MOJTBE

  • Replacement 30-75 Driver Pulleys will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end, and higher speeds in top end.
  • 30 Series Go Kart Mini Bike Torque Converter Driver Clutch 3/4″ Bore,For Go Kart, Mini Bike,Lawnmower,small tractors,Fun Kart,Golf Karts,mini choppers,ATV,motorcycles,and waterski winches etc.
  • Centrifugal Clutch is made of high quality iron material, which is lightweight, portable, sturdy, wear-resisting, fast heat dissipation and with maximum torsion
  • Works With 3HP -7HP Engines ,Fit all engines with 3/4″ shaft
  • It is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car.
  • This is a brand new aftermarket asymmetrical 30 series complete driver clutch with 3/4” ID hole.3/4″ shaft bore with 3/16” key way
  • 100% high quality material
  • The go kart clutch 30 Series Torque Converter Driver Clutch, 3/4″ Bore, with 3/16″ key Replaces Comet Trailmaster #9.500.001 Manco #5957 American Sportworks # 14716 Comet # 203814 Comet # 219552 Murray # 680167 Murray # 1201404 Yerf-Dog Q43201W Belt Size ( 203589A Metric 699 27 23/64″ around outside.) ( 203590A Metric 725 28 21/64″ around outside.) ( 203591A Metric 743 29 9/32″ around out side.)

22. VEVOR Go Cart Torque Converter 1Inch Go Cart Clutch Kit CVT Go Kart Mini Bike Drivern Clutch, With 5/8″ Driven Clutch, 10 Tooth Sprocket For #40/41 Chain, 12 Tooth For # 35 Chain, For 4-7HP Engine -Automotive

By VEVOR

  • Torque Converter Clutch Kit: Our 1″ Torque Converter is fully compatible with Comet and TAV2 torque converters
  • Excellent Material: Our go-kart torque converter use high-quality iron and aluminum materials, lightweight, sturdy, and durable
  • Replaces Comet, also apply to Manco go-karts.
  • The clutch obtains more power by reducing the engine load, achieving smooth acceleration and shifting.
  • Complete Accessories: Our clutch kit obtains a 1″ driver clutch, a 5/8″ driven clutch, a plastic assy cover, an aluminum mounting plate, a drive belt(top width 3/4″), a 10 Tooth sprocket, a 12 Tooth sprocket, full mounting hardware
  • Additional 2 Sprockets: Torque converter fits a 1″ shaft and comes with a 10 Tooth sprocket for a #40/41/420 chain and a 12 Tooth sprocket for a #35 chain(chain not included)
  • Replacement Model: Our torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W
  • It will work with engine sizes 2HP to 8HP(6HP-6.5HP is the most suitable horsepower).
  • Fully equipped, worry-free installation.
  • 30 series of asymmetrical design, some parts have been assembled.
  • It fits all engines with a 1″ straight crankshaft

23. BLACKHORSE-RACING 30 Series Bore GO Kart CVT Torque Converter 3/4″ Bore 6″ Diameter Driven Asymmetric Go Kart Mini Bike + 5/8” Driven Clutch Comet Kit + 725 Belt -Automotive

By BLACKHORSE-RACING

  • ▲ Perfect replacement driver clutch for small engines with up to 7 HP,Fitment: Mini Bike, Go Kart, Lawnmower And Many More
  • ▲ Replace Part Number: Comet 219552, Manco 5957, Yerf Dog Q43201W
  • ▲30 Series Torque Converter Driver Clutch, 3/4″ Bore, Replaces Comet 219552, 5957
  • ▲5/8″ Clutch 6″ Driven 30 Series Torque Converter: Part Number(Comet 219457a),6″ Diameter, 5/8″ Shaft Bore, 8hp Max
  • ▲ Brand new high quality 30 series asymmetrical driven clutch with 3/16” key way and 3/4” ID hole.

24. mini-bike shirt with how I roll words on front -Torque Converters

By minibike shirt

  • Lightweight, Classic fit, Double-needle sleeve and bottom hem
  • minibike riding gift for those who like their taco mini bikes and 212 hemi engines like the predator or tillotson racing mini bike engines great gift idea if not going to splurge on a tav2, comet, torque converter, brake kit, end mods, or other accessories

25. Hemi Mini Bike T-Shirt -Torque Converters

By Me Going Fast

  • Mini bike gift featuring a modded mini bike with performance race parts and predator or tillotson 212 hemi engine on it
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem
  • Features a mini bike with hemi engine, torque converter, stage 1 kit, mods, accessories

26. AuInLand 30 Series 3/4 Inch Bore Torque Converter Driver Clutch fit for Comet 219552 -Automotive

By AuInLand

  • Recommended engine 2HP-8HP.
  • Applications: It fits all engines with a 3/4″ Straight Crankshaft
  • Note: Please check the TYPE before purchasing
  • Easy to use, firmly and securely.
  • 3/4″ shaft bore with 3/16″ key way, designed for 6.5hp 212CC engines
  • You can get the most friendly customer service.
  • Features: Made of quality iron material, this torque converter has the characteristics of lightweight, portable, sturdy, durable, wear-resistant, along with maximum torque and fast heat dissipation
  • Introduction: A direct replacement kit for the go-kart torque converter 30 series
  • Small engine Torque Converter clutches are commonly used in go karts, mini bikes, and lawn mowers.
  • Part Number: Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.

27. GM Genuine Parts 24247371 Automatic Transmission Torque Converter -Automotive

By GM

  • Country Of Origin: Mexico
  • Product Type: Auto Part
  • Package Quantity: 1
  • Package Dimensions: 30.48 cms (L) x 36.195 cms (W) x 30.48 cms (H)

28. 30 Series Torque Converter Go Kart Pulley Kit 3/4 Inch Driver 5/8 Driven 10T #40 41 and 12T Sprocket #35 Chain for Manco Comet TAV2 218353A 212CC -Automotive

By OBUYTO

  • Go Kart Torque Converter Kit Included1 x Driver clutch bore: 3/4″, 1 x Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , 2 x Sprocket teeth: 10 Tooth Sprocket for #40 #41 #420 chain and 12 Tooth Sprocket for #35 Chain (Chain not included), 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate, 1 x Full Mounting Hardware, This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket
  • The model 30 is mounted with both stationary sheaves inboard
  • It will work with engine sizes hp2 to 8hp
  • 212cc Go Kart Torque Converter Clutch KitFor your convenience this kit comes with both sprockets fits a 3/4″ shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain(Chain not included)
  • Therefore mounting can be on a flat, fixed plane, requiring only minimum displacement.
  • Toruqe Converter Belt Feature Length: 70.5cm / 27.76″, Outside circumference: 27 23/64″ , Width is 3/4″.(1.9cm / 0.75″)
  • Important parts have been
  • Center to Center of driver and driven: 6-15/16 to 7″
  • 30 series Asymmetrical design
  • Compatible withFit for Comet Torque Converter, desirable in applications requiring extra rugged driving ability such as small vehicles, riding lawnmowers, boonie bikes, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, LTV’s, waterski winches, grounds maintenance appliances, materials handling devices and industrial equipment

29. Bullet Lines Torque Converter Go Kart Clutch, Replaces Comet TAV2 3/4 Inch 30-75, Manco, 10t 40 or 41 Chain, Small Engine Belt Drive, 3/4″ 218353A, (0.75″ 10T 40/41) -Torque Converters

By Bullet Lines

  • Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
  • THIS KIT INCLUDES COARSE THREAD SCREWS.
  • Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75
  • This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware, and instructions.
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
  • Driver clutch bore: 3/4″(19mm),Driven unit: Overall Diameter 6″ (5/8″ driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain
  • Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors

30. Just ONE MORE mini bike, I promise! (Fingers Crossed) T-Shirt -Women

By Me Going Fast

  • mini bike riding can be an addition, and you have to feed that need to drive and race
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem
  • mini bike graphic design shows off your insatiable need for speed with any clutch or torque converter driven system

31. 40 Series Go Kart Torque Converter Kit With Belt, Clutch Pulley Driver Driven 8 to 16 HP -Automotive

By Auto Express

  • 40 Series Torque Converter Kit with Quick-Mount Backing Plate and Jackshaft
  • Includes Driver Clutch, Driven Pulley, Belt, Cover, and Quick Mount Backing Plate With Jackshaft
  • ***PLEASE NOTE: THIS ITEM REQUIRES A SIGNATURE FOR DELIVERY UNLESS REQUESTED OTHERWISE BY THE BUYER.
  • Fits 9hp to 16hp Go Karts and Engines with a 1″ Crankshaft and 1/4″ Keyway
  • Replaces OEM Part Numbers 203015, 203015A, 209133A, 209133, 209139A, 209139, 209151A, 209151, 2432

32. Bravex Torque Converter Go Kart Clutch Set 3/4″ 10T 40/41 and 12T 35 Chain for Manco Comet TAV2 (30 Series) -Automotive

By Bravex

  • Help you get more power out of your small engine by reducing engine load.
  • Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75
  • Replace Manco Comet TAV2;Recommended engine: within 8.0 HP 212CC engines, 3/4″shaft with flat key
  • 12T sprocket for #35 chain and 10T sprocket for 41/40 chain drive clutch bore 3/4″(19mm)
  • Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation

33. Bullet Lines Torque Converter Go Kart Clutch Replaces Comet TAV2 1 inch 30-100 Manco 10t & 12t #35,40 or 41 Chain Small Engine Belt Drive (1″ 10T 40/41) -Women

By Bullet Lines

  • Torq-A-Verter
  • Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
  • Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors
  • Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
  • Driver clutch bore: 1″(24.5mm),Driven unit: Overall Diameter 6″ (5/8″ driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain.
  • ALSO – THIS UNIT DOES NOT NEED OR COME WITH THE BRONZE IDLER BUSHING: THIS PART IS ONLY FOR THE 3/4″ KIT
  • THIS KIT MAY NEED MODIFICATION TO FIT YOUR ENGINE – NONE OF THE REASONS ARE A DEFECT, AND WE WILL DISPUTE FOR NO REFUND.
  • WARNING – IF YOU PURCHASE THIS KIT AND BURN THROUGH BELTS, THEN YOU HAVE PURCHASED THE WRONG SERIES TORQUE CONVERTER
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches

34. Sibosen Torque Converter for Predator 212CC, 3/4″ Go Kart Comet CVT Clutch 10T 40/41 and 12T 35 Chain Engine Drive Replacement Set of 30 Series -Automotive

By Sibosen

  • Package Includes: 1 x 3/4″ Driver Pulley; 1 x 5/8″ Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware
  • It will work with engine sizes hp2 to 8hp
  • Important parts have been assemblied
  • This clutch will help you get more power out of your small engine by reducing engine load.
  • Complete Parts for Easy Assembly: This torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain
  • 30 series Asymmetrical design
  • Universally Fit: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W
  • Quality Ensurance for More Power: This go-kart torque converter is made of high-quality iron and aluminum material which is lightweighted, sturdy and durable while allows higher speeds out of small engine, and smoother acceleration

35. CXRCY Torque Converter 1″ 10T #40 41 420 and 12T #35 Chain 212CC 30 Series Go Kart Mini Bike Clutch Comet TAV2 30-100 Engine Drive Replacement Set -Automotive

By CXRCY

  • High Quality MaterialsThis torque converter is made of high quality iron and aluminum materials, light weight, durable
  • Replace Part Number Comet 218354A,203603A,219456A,218355A,219554A,TAV2 30-100.
  • It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed.
  • With 2 Sprockets 1 x 12 tooth sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41/420 Chain.
  • Widely FitmentFits all engines with a 1” straight crankshaft, Go Karts 30 series and 2HP-7HP engine with 1 inch shaft with flat key.You can use on motorcycle,go kart ,mini vehical and etc.Notice:The bolts are metric bolts.
  • Full-Set EquipmentThis kart torque converter kit includes the main parts: a 1″ driver pulley and a 5/8″ driven pulley,and includes other accessories like drive belt,plastic assy cover,aluminum mounting bracket plate,and full mounting hardware kit.

36. CXRCY Torque Converter 3/4″ 10T #40 41 420 and 12T #35 Chain 212CC 30 Series Go Kart Mini Bike Clutch Comet TAV2 30-75 Engine Drive Replacement Set -Automotive

By CXRCY

  • Full-Set EquipmentThis kart torque converter kit includes the main parts: a 3/4″ driver pulley and a 5/8″ driven pulley,and includes other accessories like drive belt,plastic assy cover,aluminum mounting bracket plate,and full mounting hardware kit.
  • Widely FitmentRecommende all 2HP-7HP engines,3/4″ Shaft with flat key.You can use on motorcycle,go kart ,mini vehical and etc.Notice:The bolts are metric bolts.
  • High Quality MaterialsOur Torque Converter is made of high quality iron and aluminum materials, light weight, durable
  • With 2 Sprockets1 x 12 Tooth Sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41/420 Chain.
  • It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed.
  • Replace Part NumberComet 219552A,203814A,219456A,218352A,218353A,TAV2 30-75.

37. 30 Series Bore GO Kart CVT Torque Converter 3/4″ Bore 6″ Driven Asymmetric Go Kart Mini Bike with 5/8” Driven Clutch Comet Kit with 725 Drive Belt -Automotive

By caqeg

  • Perfect replacement driver clutch for small engines with up to 7 HP
  • 30 Series Torque Converter Driver Clutch, 3/4″ Bore, Replaces Comet 219552, 5957
  • Replace Part Number: Comet 219552, Manco 5957, Yerf Dog Q43201W
  • Package Includes: 1X 3/4″ Torque Converter Driver Clutch ,1X 5/8″ Torque Converter Driver Clutch ,1X 725 Belt
  • Brand new high quality 30 series asymmetrical driven clutch with 3/16” key way and 3/4” ID hole
  • Fits GO KARTS, MINI BIKES, DIRT BIKES, ATV’S, LAWNMOWERS, GENERATORS AND MORE.
  • Size:ID:5/8”;OD:6”, It will replace Manco 5959, Comet 30 Series Drive Belt #203589, and Kartco #7628

38. 30 Series Torque Converter Go Kart Pulley Kit 1 Inch Driver 5/8 Driven 10T #40 41 and 12T Sprocket #35 Chain for Manco Comet TAV2 218353A 212CC -Automotive

By OBUYTO

  • Replaces for Comet Manco Go Karts,the clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
  • Important parts have been
  • 212cc Go Kart Torque Converter Clutch KitFor your convenience this kit comes with both sprockets fits a 1″ shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain(Chain not included)
  • 30 series Asymmetrical design
  • The model 30 is mounted with both stationary sheaves inboard
  • Go Kart Torque Converter Kit Included1 x Driver clutch bore: 3/4″, 1 x Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , 2 x Sprocket teeth: 10 Tooth Sprocket for #40 #41 #420 chain and 12 Tooth Sprocket for #35 Chain (Chain not included), 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate, 1 x Full Mounting Hardware, This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket
  • It will work with engine sizes hp2 to 8hp
  • Toruqe Converter Feature Driver clutch bore: 1″(24.5mm),Driven unit: Overall Diameter 6″ (5/8″ driven pulley), the clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
  • It fits all engines with a 1″ Straight Crankshaft
  • 30 Series Torque Converter Clutch Kit This 1″ Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A
  • Compatible withFit for Comet Torque Converter, desirable in applications requiring extra rugged driving ability such as small vehicles, riding lawnmowers, boonie bikes, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, LTV’s, waterski winches, grounds maintenance appliances, materials handling devices and industrial equipment
  • Therefore mounting can be on a flat, fixed plane, requiring only minimum displacement.

39. 30 Series Torque Converter Mounting Bolts Predator 212 Engines -Automotive

By Kart Supply

  • Standard Thread SAE Bolts.
  • Fits Predator 212 Engines and others.
  • Used with Popular 30 Series Torque Converter Kits.
  • Tav 2 Mounting Bolts

40. LAFORMO 30 Series Torque Converter 5/8″ Clutch 7″ Driven Asymmetric Go Kart Mini Bike Replaces Comet 219457A -Automotive

By LAFORMO

  • Professional Installation is Highly Recommended (No Instruction Included).
  • 30 Series Assymetrical Torque Converter
  • 100% Brand New,never been used.
  • 3/16″ Key Way, 7″ Diameter, 5/8″ Bore Driven
  • Stable characteristics, high reliability
  • Replaces: Comet 217610A,fit for Mini Bike, Go Kart, Lawnmowerand Many More

Related Posts :

41. Mini bike tee T-Shirt -Drive Train

By Me Going Fast

  • mini bike with stage 1 tav comet clutch torque converter kit
  • Mini bike
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem

42. 212cc Torque Converter 6.5 HP 3/4″ Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set – 30 Series -Automotive

By Partschoice

  • This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jacks haft with sprocket, all mounting hardware (As Pictures Shown)
  • Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine
  • ☞Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75
  • 3/4″shaft with flat key
  • ☞Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecums,eh motors.are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
  • ☞Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
  • ☞Package Included: Driver clutch bore: 3/4″, Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , 2 Sprocket teeth: 10 Tooth Sprocket for #40 #41 #420 chain & 12 Tooth Sprocket for #35 Chain (Chain not included)
  • ☞Go Kart Torque Converter Kit is a direct replacement fits for Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, 203814A 30-75
  • Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments

43. BLACKHORSE-RACING 3pcs 30 Series Go Kart Drive Belt Replaces Manco 5959 / Comet 203589 -Automotive

By BLACKHORSE-RACING

  • √ Width: 0.75″, Length: 27-1/32″ Fitment: Manco 5959 Comet 203589
  • √ GOOD PERFORMANCE:Designed for superior,high mileage and reliable performance
  • √ Center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch.
  • According to factory specifications,a great replacement belt for the old or,durability,and fit.Tested under severe environmental conditions to deliver maximum performance in any terrain or weather.
  • √ The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.
  • √ MATERIAL:Made of excellent quality rubber material,it’s sturdy and durable in use.

44. LOSTAR 212CC Torque Converter Kit Go Kart 30 Series 6.5 HP 3/4″ Go Kart Mini Bike Comet Clutch 10T 40/41/420 & 12T 35 Chain Predator Driver Pulley Replacement Set -Automotive

By LOSTAR

  • 1 Year Unlimited-mileage Quality Guarantee
  • Bring your off-road machine to life.
  • Replacement OEM ( Original Equipment Part) Number: COMET TAV2 30-75 218352 218352A 218353 218353A TAV-2
  • Description: This torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain
  • Package includes: Driver and Driven Unit:1 set, Drive Belt:1 pc, Driven Shaft & Gear:1 set, Side Retainer Plate:1 pc, Sprocket teeth: 10 teeth & 12 teeth, Cover:1 pc, All Mounting hardwares.
  • Specifications: Driven unit: 6″ (5/8″ driven pulley), Drive clutch bore: 19mm (3/4″), Belt: Asymmetrical type, Top width: 19mm(3/4″), Sprocket teeth: 10 teeth & 12 teeth, Engagement range: 2350±200 RPM
  • 30 series Asymmetrical design

45. Complete Torque Converter Go Kart Clutch Kit Set 3/4inch 10T #40/41 and 12T #35 Chain Replacement for 218353A Manco Comet TAV2 -Automotive

By AcPulse

  • 12T sprocket for #35 chain and 10T sprocket for 41/40 chain drive clutch bore 3/4″(19mm)
  • Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
  • Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75
  • Replace Manco Comet TAV2;Recommended engine: within 8.0 HP 212CC engines, 3/4″shaft with flat key

46. Go Kart Torque Converter Jackshaft, Key, Nut, etc.TAV 2 Type, 40/41 & #35 Gears for Mini-Bike -Automotive

By Fekuar

  • ▲ 2-1/2″ from end, 3/16″ Keyway
  • ▲ 10 tooth #40/41 and 12 tooth #35 Gear TAV 2 Type
  • ▲ Go Kart Torque Converter Jackshaft 5/8″ X 6-1/2″ with step to 17mm
  • ▲ 3/16″ Key Nut, Washers, Snap Ring

47. GO KART TORQUE CONVERTER for PREDATOR ENGINE, 6.5 HP 212CC 3/4″ OHV HORIZONTAL SHAFT, ENGINE CLUTCH.75 inch, Replaces Comet TAV2 218353A, 12t 35 and 10T 40 or 41 ✮ By BULLET LINES -Automotive

By Bullet Lines

  • A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration
  • Engagement range is approximately 2350 RPM
  • 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
  • small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter
  • unique engine bolt kit for predator engines and the correct anti vibration pilot washer.

48. Complete 30 Series Go Kart Mini Bike 3/4 Torque Converter Clutch Driver Pulley Replacement for Comet Manco 212CC 3/4″ Bore 10T #40/41/420 Chain -Automotive

By OBUYTO

  • Replaces for Comet Manco Go Karts,the clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
  • 30 Series Torque Converter Clutch Kit This 3/4″ Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A
  • 30 series Asymmetrical design
  • It will work with engine sizes hp2 to 8hp
  • Toruqe Converter Belt Feature Length: 70.5cm / 27.76″, Outside circumference: 27 23/64″ , Width is 3/4″.(1.9cm / 0.75″)
  • Center to Center of driver and driven: 6-15/16 to 7″
  • 212cc Go Kart Torque Converter Clutch KitFor your convenience this kit comes with both sprockets fits a 3/4″ shaft and comes with a 10 tooth sprocket for a #40/41/420 chain(Chain not included)
  • The model 30 is mounted with both stationary sheaves inboard
  • Go Kart Torque Converter Kit Included1 x Driver clutch bore: 3/4″, 1 x Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , 1x 10 Tooth Sprocket for #40 #41 #420 (Chain not included), 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate, 1 x Full Mounting Hardware, This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket
  • Therefore mounting can be on a flat, fixed plane, requiring only minimum displacement.
  • It fits all engines with a 3/4″ Straight Crankshaft
  • Important parts have been
  • Compatible withFit for Comet Torque Converter, desirable in applications requiring extra rugged driving ability such as small vehicles, riding lawnmowers, boonie bikes, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, LTV’s, waterski winches, grounds maintenance appliances, materials handling devices and industrial equipment

49. Mini Bike T-Shirt T-Shirt -Drive Train

By Me Going Fast

  • Mini bike doing a wheelie on the front of the t-shirt
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem
  • Mini bike gift – not a torque converter, but still a great shirt accessory for the mini bike rider.

Best Brands

Buying a product from a reputable manufacturer that provides high brand value is one of the most essential things. Based on my research, here are the top brands that make the best torque converter for mini bike.

  • IPARTS EXPERT
  • CXRCY
  • MOOSUN
  • Ameetaa
  • Mophorn
  • Generic
  • munirater
  • Megaflint
  • BLACKHORSE-RACING
  • RYANSANS

The Buyer’s Guide

Although the aim of this list is to help you choose the best option for your needs. This guide shall help you make an informed purchase decision. Here are the few things to consider when choosing a torque converter for mini bike.

1. Features

There’s no point in purchasing a torque converter for mini bike that doesn’t solve your usage needs. Sometimes, even the best option wouldn’t have all the options you’d need. That’s why list down all your feature requirements and make sure that the option you’ve chosen comes with all of them.

2. Budget

Budget plays an important role, if it wasn’t for the budget, wouldn’t everyone purchase the most expensive option? However, before you decide the budget, I’d recommend you to make a list of features you’d need. In case a feature you need the most isn’t available in your budget range, then there’s no point in buying it, is there?

My advice is to make sure that the product has all the features you need then decide the budget. If a product you’ve chosen isn’t having all the features you need, then you should consider increasing your budget.

3. Value For Money

There are times when you shall come across various torque converter for mini bike that shall have all the features you need. However, the price difference shall exist. In a situation like this, it is recommended to value each feature and make sure that you’re not overpaying for a feature you wouldn’t use.

4. Brand, Customer Support, & Warranty

Purchasing a product from a reputed brand is very important. Not only does it guarantee high-quality build, but you also get much better customer support.

You should also make sure that it has a decent warranty, it is really helpful in case a product breaks down due to manufacturing defects. Also, repairs during warranty are generally free of cost (depends on service terms).

5. Individual Product Reviews

You don’t have to watch individual reviews of each torque converter for mini bike in this list. However, pick 2-3 options that have all the technical aspects according to your usage needs. Once you’re ready with it, go to YouTube/Amazon and look at video/customer reviews to make sure that the existing buyers are satisfied with the product.

The FAQs

Which is the best torque converter for mini bike?

According to my research, the GM Genuine Parts 24247371 Automatic Transmission Torque Converter is the best option.

Is GM a reliable brand?

It’s one of the best brands, not only does it make the top-rated torque converter for mini bike, but it also is known for its exceptional service.

Which is the cheapest yet powerful torque converter for mini bike?

According to me, the LAFORMO 212CC Torque Converter 6.5 HP 3/4″ Go Kart Mini Bike Comet Clutch 12T 35 Chain Predator Driver Pulley Replacement Set – 30 Series is one of the cheapest options available and yet has all the features.

Are there deals going on?

A few of the options in our article are currently available for a discounted price. However, check out the product listing to find more information.

What brands should I consider when purchasing?

Based on my research, these are the top 5 brands: GM, Auto Express, AcPulse, Bullet Lines, and MOOSUN.

Should I buy it online or go to an offline store?

Shopping online comes with a few advantages such as discounted pricing, quick delivery at home. However, if you’re in a hurry or can find the product for a cheaper price in the offline market, consider visiting the offline store.

The Verdict

Choosing the right product isn’t easy and for many of them it could be a time consuming task. However, with this guide, my aim is to help you guys find the perfect torque converter for mini bike for your needs.

I’ve done a huge research to ensure that options I’ve listed are among the best. Like mentioned above, I also interviewed many experts to make sure that the enlisted models are high quality.

I hope that you’re able to find the right torque converter for mini bike for your usage. If you are still struggling to find one, feel free to comment below or contact me.