Power Tool Parts & Accessories Product Guides

48 Best miter saw accessories in 2023: According to Experts.

Written by Jeff Lampkin

You could get any random miter saw accessories, but if you’re looking for expert advice on choosing the best one for your needs then you’ve arrived at the right place.

It doesn’t matter what your miter saw accessories needs are or what your budget is, because I’ve done an in-depth analysis to include the best-rated options suitable for diversified usage needs and different budget ranges.

To make this list, I’ve spent 37 hours researching miter saw accessories from the best brands such as: DEWALT, OSHLUN, DEWALT.

Note: Make sure that option you’re choosing has all the features you need. Afterall, is there any point in purchasing something that’s not usable?

48 Best miter saw accessories in 2023: After 37 Hours of Research

To make this list an unbiased resource for choosing the best miter saw accessories, I contacted 22 experts and discussed various aspects to consider. After a huge discussion, I went across customer reviews, researched the reputed brands, and a lot of other things. Because my aim is to recommend products that are highly value for your money.

1. DEWALT Miter Saw Mounting Brackets, 2 Pack, 12 inch Blade Length, Retractable Clamps (DW7231) -Tools & Home Improvement

By DEWALT

DEWALT Miter Saw Mounting Brackets, 2 Pack, 12 inch Blade Length, Retractable Clamps (DW7231)
  • Non-marring feet on tool mount of the miter saw mounting brackets will not scratch material
  • Compatible with DW723, DWX723, DWX724, and DWX725 stands
  • Tough polymer feet allows tool to be placed and used on flat surface
  • Easy-relase attachment clamps allows fast attachment and detachment of tool
  • Includes : 2- Tool mounting brackets; Mounting hardware and instructions

2. Oshlun LG-M01 Miter and Portable Saw Laser Guide, Miter & Portable Saws , grey -Tools & Home Improvement

By OSHLUN

Oshlun LG-M01 Miter and Portable Saw Laser Guide, Miter & Portable Saws , grey
  • New Brighter And More Accurate Laser Line
  • New Recessed Laser Design To Protect The Laser From Hitting The Material On Deep Cuts
  • New Thinner Design To Fit More Saws
  • Fits Most 7-1/4, 8, 8-1/4, 10, And 12-Inch Miter, Sliding Compound Miter, Chop, And Portable Saws

3. DEWALT Miter Saw Stand, Heavy Duty (DWX723), Silver -Tools & Home Improvement

By DEWALT

DEWALT Miter Saw Stand, Heavy Duty (DWX723), Silver
  • Universal design of DEWALT miter saw stand works with all brands of miter saws
  • Leg Lock Levers allow for fast and easy set up
  • Extension lock levers allow for fast and secure tightening of extensions
  • Lightweight aluminum construction (29 lbs.) of DEWALT miter saw stand allows for easy transport to and from the jobsite
  • Miter saw mounting brackets allow easy and secure mounting of miter saw to stand
  • Work stops/supports can be repositioned quickly anywhere along the rail
  • Non-marring feet on tool mount will not scratch material
  • of material and up to 500 lbs.
  • 5-1/2 ft
  • Miter saw not included
  • beam extends to support up to 16 ft
  • Legs provide superior support and fold for easy storage

4. DEWALT Miter Saw Crown Stops (DW7084) -Tools & Home Improvement

By DEWALT

DEWALT Miter Saw Crown Stops (DW7084)
  • Designed to work with DEWALT models DW703, DW706, DW708, DW712, DW715, DW716, DW717 and DW718
  • Includes 2 stops – one for each side of the blade
  • Miter saw crow stop accurately positions crown molding vertically against the saw fence

5. DEWALT Miter Saw Work-Piece Support/Stop (DW7232) -Tools & Home Improvement

By DEWALT

DEWALT Miter Saw Work-Piece Support Stop (DW7232)
  • Compatible with DW723, DWX723 and DWX724 Miter Saw Stands
  • Adjustable height from 3 7/8-inch to 6-inch to match any miter saw table height
  • Miter saw work stops/supports can be repositioned quickly anywhere along the rail
  • Flip-up stop for fast conversion to a cut stop
  • Material support supports work piece when cutting

6. REEKON M1 Caliber Measuring Tool for Miter Saws – Eliminates Need to Measure & Mark Materials, Reduces Cut Time and Increases Safety, Measures Flat & Round Materials -Industrial & Scientific

By REEKON

REEKON M1 Caliber Measuring Tool for Miter Saws – Eliminates Need to Measure & Mark Materials, Reduces Cut Time and Increases Safety, Measures Flat & Round Materials
  • Make miter, bevel, compound, and straight cuts on a variety of materials ranging from boards to composites to pipe
  • COMPATIBILITY – Displays both English and Metric measurements and is compatible with most miter, cut-off, chop and vertical band saws
  • INCREASED SAFETY – Whether cutting dimensional lumber to frame out a home, cutting composite planks for decking or putting the finish touches on an interior job, the M1 centralizes measurement related activity to a single location
  • A BETTER WAY TO MEASURE – The M1 Caliber is a fully integrated, patent-pending, measuring tool that clamps to almost any kind of saw fence and outputs measurements of materials slid underneath its wheel on a large, backlit, LCD screen
  • Perfect for professionals, contractors, woodworkers and other tradespeople
  • QUICK AND EASY SETUP – Clamp to your saw fence, release the arm, input your blade thickness and begin to cut
  • The M1 Caliber eliminates the need for a tape measure and pencil
  • The M1 will provide the most accurate read on smooth materials
  • DIGITIZE YOUR MITER SAW – Using modern technology with a focus on functionality, measure and cut stock materials up to 3 times faster than conventional methods and measuring tools

7. Rousseau 5000-L Lighted Dust Solution For Miter Saws, Silver -Tools & Home Improvement

By Rousseau

Rousseau 5000-L Lighted Dust Solution For Miter Saws, Silver
  • For use with all miter saws
  • Hood folds into heavy duty carry bag for compact storage and transport
  • Use with shop vac, dust collectors or installed vacuum systems
  • Interior baffles prevent escape of fine dust
  • Eliminates dust generated by miter saws and illuminates work surface

8. Rousseau 5000 Dust Solution for Miter Saws, Silver -Tools & Home Improvement

By Rousseau

Rousseau 5000 Dust Solution for Miter Saws, Silver
  • Interior Baffles Prevent Escape Of Fine Dust
  • Hood Captures Dust And Directs Airflow To 4″ Vacuum Port
  • Hood Folds Into Heavy Duty Carry Bag For Compact Storage And Transport
  • Hood Captures Dust And Directs Airflow To 4″ Vacuum Port
  • Fits All Miter Saws
  • Hood Folds Into Heavy Duty Carry Bag For Compact Storage And Transport
  • Use With Shop Vass, Dust Collectors Or Installed Vacuum Systems
  • Fits All Miter Saws
  • Use With Shop Vacs, Dust Collectors Or Installed Vacuum Systems
  • Interior Baffles Prevent Escape Of Fine Dust

9. DEWALT Miter Saw Stand Wide Roller Work Support Attachment (DW7027) Large -Tools & Home Improvement

By DEWALT

DEWALT Miter Saw Stand Wide Roller Work Support Attachment (DW7027) Large
  • Compatible with dw723, dwx723 and dwx724 miter saw stands
  • Package Weight: 2.495 kilograms
  • Adjustable height from 4-1/4-Inch to 6-Inch to match any miter saw table height
  • 15-Inch wide roller material support supports wide work pieces when adjusting and cutting

10. LEXIVON Aluminum Miter Saw Protractor | 7-Inch Rust Proof Angle Finder Featuring Precision Laser Engraved Scales (LX-230) -Miter Saw Accessories

By LEXIVON

LEXIVON Aluminum Miter Saw Protractor | 7-Inch Rust Proof Angle Finder Featuring Precision Laser Engraved Scales (LX-230)
  • ACCURATE – Crafted from CNC-machined Anodized Aluminum Alloy Steel; Features easy-to-read precision laser engraved scales
  • DESIGN – Internal Teflon O-ring mechanism swivels during operation and ensures smooth & precise read on inside/outside corners
  • DO IT RIGHT THE FIRST TIME – Perfect for crown molding, trim work, plumbing, and a variety of other carpentry applications
  • FORGET ABOUT THE GUESSWORK – Two scales transfer your work angle directly to the miter saw for an accurate Miter cut, and Single cut

11. WEN MSA330 Collapsible Rolling Miter Saw Stand with 3 Onboard Outlets -Tools & Home Improvement

By WEN

WEN MSA330 Collapsible Rolling Miter Saw Stand with 3 Onboard Outlets
  • Collapsible rolling stand features two 8-inch never-flat wheels for simple transportation and storage
  • Sturdy 1-1/2-inch diameter steel frame elevates your miter saw 33 inches off the ground
  • Includes three onboard 15A 120V outlets, two height adjustable rollers, quick-release brackets, two table extensions, a powder-coated finish and a two-year warranty
  • Universal design fits nearly every miter saw on the market, including all WEN miter saws
  • Extend the support arms anywhere from 32 to 79 inches to support boards up to 10.5 feet long

12. Dewalt DW718 / DWS780 / DW717 Miter Saw Clamp Assembly (2 Pack) # 630065-00-2pk by DEWALT -Tools & Home Improvement

By DEWALT

Dewalt DW718   DWS780   DW717 Miter Saw Clamp Assembly (2 Pack) # 630065-00-2pk by DEWALT
  • Sold on Amazon

13. Leecraft DW-4Y Zero-Clearance Insert is Compatible with Dewalt Sliding Compound Miter Saws DHS780, DHS790, DWS779, DWS780 and DWS782 (Color – Yellow) -Tools & Home Improvement

By Leecraft

Leecraft DW-4Y Zero-Clearance Insert is Compatible with Dewalt Sliding Compound Miter Saws DHS780, DHS790, DWS779, DWS780 and DWS782 (Color - Yellow)
  • Made from high-density phenolic laminate with a bonded-melamine surface
  • Leecraft model DW-4 fits is compatible with DeWalt sliding miter saws: DHS790, DWS779, DWS780 and DWS782
  • Miter saw insert supports work right up to the blade for smooth, more precise cuts
  • Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
  • Dimensions: 17 3/8″ x 3 1/4″ x 3/8″

14. RitPin Miter Saw Cover, Fit for Most Miter Saws, Planers, Machine Tools, To Prevent Table Saw Rust, Waterproof and Dustproof, Black -Tools & Home Improvement

By RitPin

RitPin Miter Saw Cover, Fit for Most Miter Saws, Planers, Machine Tools, To Prevent Table Saw Rust, Waterproof and Dustproof, Black
  • Since it is good air permeability, waterproof, rust, dustproof and easy to clean, it can be used all year round
  • MULTI-PURPOSE USE – Miter saw cover can be used for machines or tools of similar size as well as many other uses
  • Please make sure that the size fits when you buy it
  • REFLECTIVE STRIP – Miter saw cover with a circle of the reflective strip, at night can reflect the surrounding light, play a role in warning passers-by to prevent accidental collisions
  • ULTRA DURABLE 600D OXFORD MATERIAL – Top heavy duty 600D Oxford fabric and PU coating, can protect the miter saw and other tools well
  • HIGH QUALITY MITER SAW COVER – Our cover has a spring buckle drawstring is installed at the bottom to protect your tools from dust and debris
  • FIT FOR MOST MITER SAWS – Cover size: 27.5″L x 23.6″ W x 27.5″ H

15. DEWALT Miter Saw Stand, Collapsible and Portable, 40” Beam, Extends up to 10 ft, Holds up to 500 lbs (DWX724) -Tools & Home Improvement

By DEWALT

DEWALT Miter Saw Stand, Collapsible and Portable, 40” Beam, Extends up to 10 ft, Holds up to 500 lbs (DWX724)
  • of material and up to 500 lbs.
  • Compact design of DEWALT miter saw stand allows easy transport and storage
  • Work stops/supports can be repositioned quickly anywhere along the rail
  • Legs provide superior support and fold for easy storage
  • 40-inch beam extends to support up to 10 ft
  • Lightweight aluminum construction (29.8 lbs.) allows for easy transport to and from the jobsite
  • Non-marring feet on tool mount will not scratch material
  • Leg Lock Levers allow for fast and easy set up
  • Extension Lock Levers allow for fast and secure locking of extensions
  • Tool mounting brackets allow easy and scure mounting of miter saw to stand
  • Universal design of DEWALT miter saw stand works with all brands of miter saws

16. Black Dust Collection Bag for Miter Saw 255 Model with Zipper and Wired Adjustable Stand, Dust Collector Bags for Miter Saw, Tank Belt Sander, Edge Planer, Diagonal Saw (2 Pack) -Tools & Home Improvement

By FACULX

Black Dust Collection Bag for Miter Saw 255 Model with Zipper and Wired Adjustable Stand, Dust Collector Bags for Miter Saw, Tank Belt Sander, Edge Planer, Diagonal Saw (2 Pack)
  • Make the Setup Easy: the installing process is quite simple, get this universal dust bag and catch it with your miter saw such as 255 model miter saw, no tools required; if you have any other question on this item, we are always glad to help
  • Widely Applied: the universal miter saw dust bag can be compatible for so many industrial machine such as cutting machine, edge planer, diagonal saw, tank belt sander for its adjustable bag hood, meet your needs for more occasions
  • Great Materials: the sawdust collection bag is made by fine textile and great polyester materials, which is lighter, and won’t break after long time use; also easy to disassemble for cleaning, keep your workbench neat and tidy
  • Bag Size Fitting Universally: the table saw dust bag dimension is 8.9 x 6.3inch/ 22.5 x 16cm; the bag hole diameter is adjustable from 1.7~2inch/ 4.5~5cm ; with zippers to dump dust easier
  • Steel Wired Hole Ash Outlet: the dust bag ash outlet is designed with steel wire, which has a flexible hood hole, catch up the machine firmer than traditional dust collection bag

17. Zero Gap Woodworking Tape for More Accurate Cuts On Miter Saw Table Saw PVC Self Adhesive Strips for Positioning Wood Cutting, 2 x 14 Inch, Yellow (10 Pcs) -Tools & Home Improvement

By Fabbay

Zero Gap Woodworking Tape for More Accurate Cuts On Miter Saw Table Saw PVC Self Adhesive Strips for Positioning Wood Cutting, 2 x 14 Inch, Yellow (10 Pcs)
  • Specifications: the size of each zero gap woodworking tape is approx
  • 2 x 14 inches, such a proper size that is suitable for most table saws; You can also cut it to make it fit more closely; The thickness of the tape is approx
  • Package Content: you will receive 10 pieces of zero gap woodworking adhesive tapes, enough quantity that can satisfy your daily use and replacements, allowing you to use them for different purposes
  • Not Easy to Fall off: this zero gap woodworking tape has a sticky adhesive backing that is not easy to fall off or shift in position during your operation, making sure your work goes smoothly
  • 0.3 mm/ 0.01 inches, which ensures accurate positioning while maximally reduce effects of extra thickness on cutting
  • Reliable Material: zero gap woodworking tape is made of reliable PVC material, thick and not easy to break, and it has been designed into neat long strips that can ensure the cut is exactly the same size as the blade for accurate cutting
  • Easy to Use: you just need to stick the zero gap woodworking tape on the table saw, then align the tape and cut it once, so that the tape on the table saw leaves a trace of incision, which is convenient for you to accurately locate the position of the incision when cutting wood; Moreover, it won’t leave glue marks when changing the tape

18. Festool 494369 Kapex Miter Saw Crown Stop With Base Extension -Tools & Home Improvement

By Festool

Festool 494369 Kapex Miter Saw Crown Stop With Base Extension
  • Secures crown molding in the nested postion for safer, more accurate cutting
  • Base extension fits either side of saw
  • Integrated T-slots enable additional clamping capability, expanding the use of job-specific jigs when used with Festool FS clamps
  • Crown stops slide easily and lock securely with T-nut construction, allowing you to move quickly between setups
  • Base extensions attach quickly via a V groove channel on each side, minimizing set up time

19. DeWalt OEM N126162 Miter Saw Dust Bag DCS361B DCS361M1 DW713 DW713-AR DW713-B2 DW713-B3 DW713-BR DW715 DW715-AR DW715-B2 DW715-B2C DW715-B3 DW715-BR DW716 0 DW716XPS 0 DWS709 0 DWS780 -Tools & Home Improvement

By DEWALT

DeWalt OEM N126162 Miter Saw Dust Bag DCS361B DCS361M1 DW713 DW713-AR DW713-B2 DW713-B3 DW713-BR DW715 DW715-AR DW715-B2 DW715-B2C DW715-B3 DW715-BR DW716 0 DW716XPS 0 DWS709 0 DWS780
  • Measures approximately 11.00 X 3.00 X 2.30 inches
  • Dewalt replacement dust bag, part number N126162
  • Genuine, OEM Dewalt Replacement Part
  • Compatible with: DCS361B Type 1, DCS361M1 Type 1, DW713 Type 2, DW713-AR Type 2, DW713-B2 Type 2, DW713-B3 Type 2, DW713-BR Type 2, DW715 Type 3, DW715-AR Type 3, DW715-B2 Type 3, DW715-B2C Type 3, DW715-B3 Type 3, DW715-BR Type 3, DW716 Type 20, DW716XPS Type 20, DWS709 Type 20, DWS780 Type 1, DWS780 Type 20, DWS780-AR Type 20, DWS780-B2 Type 20, DWS782 Type 20, 352VS Type 7, 352VS Type 8, 352VS Type 7, 352VS Type 8

20. Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop -Tools & Home Improvement

By Fulton

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
  • 1 tape is left to right reading and the other is right to left reading.
  • When not in use the flip stop can be flipped up and out of the way
  • 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees
  • Both ends of the fence are cut at exactly 45 degrees
  • Together these three items are the perfect compliment to each other for your table saw cutting needs.
  • The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time
  • Also include are two sticky back measuring tapes
  • The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges
  • The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge
  • The fence comes with a flip stop that makes repetitive cuts a breeze
  • The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide
  • Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot
  • Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw
  • The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes

Related Posts:

21. Bylot 5000-L Lighted Dust Solution Compatible with all Miter Saws -Tools & Home Improvement

By Bylot

Bylot 5000-L Lighted Dust Solution Compatible with all Miter Saws
  • Can be used in Home, Carpenthy workshop, etc.Fit for all 10 inch miter saws.
  • Surround LED lighting improves visibility, enhances safety and accuracy
  • Help you keep your environment clean and avoid difficult cleaning problems.
  • Compatible with vacuum cleaners, dust collectors or other vacuum systems,with a 3.89″ connection pipe.
  • Surrounding enclosure to prevent dust and sawdust generated during operation from flying around.

22. DEWALT Miter Saw Stand, Collapsible and Portable, Holds Up to 300 lbs (DWX726) -Tools & Home Improvement

By DEWALT

DEWALT Miter Saw Stand, Collapsible and Portable, Holds Up to 300 lbs (DWX726)
  • Easily adjustable mounting rails of DEWALT miter saw stand adapt to nearly any miter saw
  • The rolling miter saw stand features three-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up
  • Durable tubular steel construction allows for a 300 lb maximum weight capacity
  • Miter saw stand with wheels featuring wide rubber grip provide easy jobsite mobility
  • Compact vertical storage option maximizes workplace efficiency and ease of transport
  • Straightforward one-time assembly minimizes down time

23. WORKESS Roller Support Stand 132 Lbs Load Capacity, Twin Pack WK-RS004T -Table Saw Accessories

By WORKESS

WORKESS Roller Support Stand 132 Lbs Load Capacity, Twin Pack WK-RS004T
  • The stands can be locked off at any desired height using the red locking lever
  • We have the most professional after-sales team to provide you with services
  • If you have any questions, you can contact us at any time.If accessories are missing, please contact us
  • SMOOTH ROLLERWith smooth rollers material can move from front to back,the roller runs on two sealed for life ball race bearings which prevent fine dust from entering and reducing the rotational performance
  • CERTIFICATIONS Our Brand have BSCI, ISO9001, ISO14001,OHSAS18001 certifications as well as other quality and security certification
  • ADJUSTABLE HEIGHTRoller Support Stand Height Adjusts from 26-3/4 in
  • PORTABLE & FOLDINGRoller Stand fold into a convenient collapsible size, folds and unfolds for quick set-up and convenient storage
  • After-sale GuaranteeWORKESS is a reliable brand, you can contact us if you meet problems during purchasing.
  • DURABLE ROLLER STANDMade of 100% high quality steel, powder coating and zinc-plated surfaces
  • When paired with a second table, each pair can hold up to 264 pounds.
  • Alone it has an incredible 132 lbs
  • The roller stands fold down for easy handling and compact storage.
  • to 42-1/5 in
  • Rugged and capable of handling your most demanding jobs
  • Four non slip rubber feet ensure that the stand does not wander in use.
  • This allows you to work at the right height, making your projects easier and more efficient!

24. SENCTRL Automatic Vacuum Switch Allow Power Tool/Table Saw To Turn Vac Cleaner/Accessory On And Off Automatically, Load Sensing, On Delay Prevent Circuit Overload, Shop Dust Collector Off Delay -Tools & Home Improvement

By senctrl

SENCTRL Automatic Vacuum Switch Allow Power Tool Table Saw To Turn Vac Cleaner Accessory On And Off Automatically, Load Sensing, On Delay Prevent Circuit Overload, Shop Dust Collector Off Delay
  • If the load connected to the ‘TOOL’ port exceeds 30W, the vacuum connected to the ‘VAC’ port will automatically delay 1s to start, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time.
  • Durable PC+ABS V0 grade flame retardant material case, reduce heat during use and extend service life.
  • Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems.
  • SHUT OFF DELAY: Automatically delay vacuum turn-off by 7s to continue clearing the remaining airborne debris after the load connected to the ‘TOOL’ port has stopped
  • Load Sensing Technology
  • NEW GENERATION: Add a manual switch to support three vacuum run modes: Auto, Off and On
  • You can not only turn the vacuum on/off automatically with the power tools, but also manually turn the vacuum on/off all time according to your actual condition.
  • COMPATIBILITY: Support a wide range of cutting tools from handheld devices to large shop saws such as table saw, miter saw, track saw, chop saw, sander, router table, planers, shopvac, remote control outlet, automated vacuum switch, dust collection systems for woodworking and etc
  • HIGH-QUALITY MATERIALS: Adopt 19.7 inch UL-certified US standard 14AWG power cord which allow passage with a large current more than 30A
  • TURN ON DELAY
  • Power rating should not exceed 120 VAC, 15 Amp, 60 Hz, 1875w.

25. Digital Angle Finder with Electronic Laser – 4-side Strong Magnetic Angle Gauge, Cube Inclinometer with Backlight, Table Saw Miter Protractor, Woodworking Measuring Tool, Level Box for Hanging -Tools & Home Improvement

By COROLLATA

Digital Angle Finder with Electronic Laser - 4-side Strong Magnetic Angle Gauge, Cube Inclinometer with Backlight, Table Saw Miter Protractor, Woodworking Measuring Tool, Level Box for Hanging
  • Brilliant little cube – L2.4in, W2.4in, H1.2in, portable pocket size with matching belt bag
  • It also has dust-proof and IP67 waterproof performance with bright backlight
  • Furthermore, this digital level box maybe a great gift for father’s day, birthdays, Christmas.
  • If you have any questions please feel free to contact us
  • Magnetic feature and lasers are great advantages for measuring, cutting, leveling in woodworking renovations and building furniture.
  • This inclinometer, digital angle finder comes complete with a USB-C charging cable for the internal 340mAH rechargeable battery
  • Even in garage, with the door open and the sunshine pouring in, you can easily read the display.
  • 4*90° measurement can be used at many angles and can be zeroed at any angle for comparison.
  • Save time and effort hanging decorations – Dual lasers are great helper for horizontal and symmetrical installation
  • ±0.2° precise microprocessor with automatic inversion when upside down
  • Craftsman’s Choice – Not only the baseboard, but also the strong magnetic upgrade at the four sides
  • Never slide on the table saw blade or any metal surface
  • Technical Parameters – Material: aluminum alloy| Measuring range: 4*90°| Resolution: 0.05°| Accuracy: ±0.2°| Repeatability: 0.1°| Power supply: 3.7V lithium battery| Working temperature: 14-122℉ FCYMOV

26. Automatic Vacuum Switch, Ortis Dust Control Autoswitch for More Power Tools, Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Adjustable Actuation Threshold -Tools & Home Improvement

By Ortis

Automatic Vacuum Switch, Ortis Dust Control Autoswitch for More Power Tools, Delay Vacuum On Off to Prevent Circuit Overload and Tripping, Adjustable Actuation Threshold
  • Max motor rating should not exceed 120V/15A 50/60Hz, 1875W.
  • CONFIGURABLE SHUTOFF DELAY TIME: Automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency.
  • NEW GENERATION: Addition of two tool outlets, no need extra extension socket, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, Off and On; The values are clearly displayed with LED indicators, each key for corresponding option, easier to check and set.
  • COMPATIBILITY: Supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Table Saws, Power Sanders, Routers, Joiners, Planers etc
  • CONFIGURABLE ACTUATION THRESHOLD: 30W/60W, you can select flexibly appropriate actuation threshold according to your actual condition
  • Prevent vacuum from running too long or being unable to shut off after tool has stopped.
  • Adopting UL-certified American Standard 14AWG power cord which allowable passage with a large current more than 30A
  • Thick copper core, covered with PC+ABS V0 grade flame retardant material, less heat during use and extend service life.
  • TURN ON DELAY & SAFETY: Automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping

27. Milescraft 4009 FenceClamps- Universal,Silver -Tools & Home Improvement

By Milescraft

Milescraft 4009 FenceClamps- Universal,Silver
  • Range of travel 1/2″-5-3/4″ (12mm to 146mm)
  • Fits into a 3/8” hole in the top of the auxiliary fence
  • Allow you to secure a wide variety of shop-made auxiliary fences to your existing fences without the Clamp getting in the way.

28. Kreg KMA2800 Crown-Pro Crown Molding Tool -Tools & Home Improvement

By KREG

Kreg KMA2800 Crown-Pro Crown Molding Tool
  • Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome
  • Crown Molding Cutting Tool: Eliminates compound-angle cuts; cuts molding up to 5 1/2 inches wide
  • The Right Cut: Beautiful, seamless-fitting crown molding takes the guesswork out of crown molding
  • Many Angles: Adjustable spring base locks anywhere from 30 to 60; compatible with 10- and 12-inch miter saw
  • Angle Finder: Measures exact angle of inside and outside corners; also measures molding spring angle

29. Kreg KMS8000 Precision Trak and Stops Kit -Tools & Home Improvement

By KREG

Kreg KMS8000 Precision Trak and Stops Kit
  • Secure Workshop Accessories: The saw Trak has an L-shaped base that makes alignment and mounting easy
  • Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome
  • Secure Home Improvement Tool: The swing stop and production stop saw guides keep precise measurements
  • Versatile Saw Accessory: This saw measuring tool works for miter saws, radial arm saws, and drill presses
  • Premium Woodworking Tools: This measuring tool turns miter saws into precise cutting tools for repeatable cuts

30. Premium Hedgehog Spiral Featherboard for Quicker, Easier, and Safer Workflow | Featherboard for Table Saws, Router Tables, and Band Saws -Tools & Home Improvement

By The Hedgehog

Premium Hedgehog Spiral Featherboard for Quicker, Easier, and Safer Workflow | Featherboard for Table Saws, Router Tables, and Band Saws
  • It’s also perfect for beginners: If you are just starting out in woodworking, this single knob featherboard will make it easier than ever before for you control and cut wood accurately while improving safety.
  • The Hedgehog spiral featherboard has a simplified design that features only one knob for quick, easy, and seamless adjustments
  • The Hedgehog featherboard reduces kickback and other dangers for enhanced safety: Thanks to the unique spiral design of this featherboard, kickback (which is when a board is flung back toward you by the spinning blade) is greatly reduced.
  • You’ll produce smoother and cleaner cuts: The precision and accuracy in this premium featherboard ensures that you can hold the wood tight against the fence which results in cleaner, smoother cuts
  • Please measure before ordering
  • Improve the quality of your work: This premium, single pivot point featherboard will guarantee high quality output every single time
  • Fits 3/4-inch miter slots which is the most common, standard size – This will not work on small table saws with 5/8-inch miter slots
  • One-handed operation for quick adjustments
  • This single pivot point streamlines woodworking while maximizing your productivity.
  • Please go to www.amazon.com/dp/B09M2M53YK for the 5/8-inch bundle package.
  • It’s perfect for hobbyists and professionals looking to create wooden masterpieces.
  • Dramatically improve the quality of your woodworking production.

31. MICROJIG GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow -Tools & Home Improvement

By MICRO JIG

MICROJIG GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow
  • Work with small stock safely on the table saw, Router table, Jointer, & Band saw
  • Powerful high-friction durable grip for extreme hold
  • 3-Directional Force for total control of the workpiece
  • Fully adjustable for easy handling
  • A true MICROJIG Innovation.
  • Precision cutting and control down to 1/4″ Ripping
  • Designed in USA
  • Protect hands and prevent kickback like never before

32. Yiranok Angle Setup Block – Precision Miter Saw Angle Quick Set Up Ruler – Miter Saw Protractor Preset Tools Accessories – Angle Measuring Gauge for Woodworking – Marking Carpenter Square Scale -Tools & Home Improvement

By Yiranok

Yiranok Angle Setup Block - Precision Miter Saw Angle Quick Set Up Ruler - Miter Saw Protractor Preset Tools Accessories - Angle Measuring Gauge for Woodworking - Marking Carpenter Square Scale
  • Wide Application – Whether you are professional or not, Yiranok angle square is suitable for miter cutting, molding, plumbing, woodworking, metalworking, carpentry and more, not only angle setting, but also angle checking.
  • If there is quality problem or any other questions in daily use, please be free to contact us.
  • If you have more ‘angle needs’, just contact us, which is important for us to further improve and update our design.
  • Major Time Saver – Yiranok angle setup block is made for angle quick setup, it’s not a angle finder or miter saw protractor, but a precision angle preset to saving your time, quickly setting the angles of your miter saw blades or cutting boards.
  • Add It Into Your Toolbox – Yiranok set up scale is poised to further simplify the angle setting and checking, it’s the must have tool for construction, woodworking and home DIY, also the best gift choice for these enthusiast.
  • Commonly Used Angle Preset – According to series of survey results, we preset the angle ruler as 45°, 54°, 60°, 67.5° and 75°
  • Quality & Service – We are confident in the quality of the miter saw angle scale, which is made of anodized soft aluminum, antirust and waterproof

33. Table Saw Dust Collector Bag (10″ Tablesaws with 2.5″ Dust Port) Fits Bosch/Dewalt/Makita/Ryobi/Craftsman/Porter Cable/RIGID/Metabo/Kobalt/Skilsaw/Delta/ -Tools & Home Improvement

By XHBAN

Table Saw Dust Collector Bag (10  Tablesaws with 2.5  Dust Port) Fits Bosch Dewalt Makita Ryobi Craftsman Porter Cable RIGID Metabo Kobalt Skilsaw Delta
  • Table Saw Dust Collector Bag: Effective at keeping your work area clear of debris
  • Replaces part TS1004.
  • Provides up to 70% of dust collection
  • Premium Quality: Made of high-quality cloth with wire support frame, lightweight design, durable and dependable
  • Simply squeeze the spring clamp and slide clamp over tabs on dust port and release spring clamp
  • Easy to attach and detach to your table saw
  • Easy to empty.
  • Compatible with Bosch /Dewalt /Makita /Ryobi/ Craftsman /Porter Cable/ RIGID/ Metabo/ Kobalt/ Skilsaw/ Delta 10 inch tablesaws, and other table saws that have 2-1/2 inch dust ports on the exterior of the saw.
  • The dust bag requires emptying when full of sawdust.

34. DEWALT Miter Saw Stand Material Support/Stop (DW7029) -Tools & Home Improvement

By DEWALT

DEWALT Miter Saw Stand Material Support Stop (DW7029)
  • Adjustable height from 3 7/8-inch to 6-inch to match any miter saw table height
  • 15-inch wide material support of DEWALT miter saw stand supports wider work piece when cutting
  • DEWALT miter saw stand has a flip-up stop for fast conversion to a cut stop
  • Compatible with DW723, DWX723 and DWX724 Miter Saw Stands

35. WORKPRO Folding Roller Stand Height Adjustable, Heavy Duty 250 LB Load Capacity, Outfeed Woodworking, W137006A -Jig Accessories

By WORKPRO

WORKPRO Folding Roller Stand Height Adjustable, Heavy Duty 250 LB Load Capacity, Outfeed Woodworking, W137006A
  • Adjustable Height From 27-In To 43-In
  • Portable, Light-Weight Design Folds For Convenient Storage
  • Highly Visible Edge Guides Keep Work In Place
  • Eccentric Foot Keeps Stand Stabilized On Uneven Surfaces

36. 395672-00 Miter Saw Kerf Plate Fits 708 708-B2 708-BR, Yellow, Kerf Board, 2 PCS -Tools & Home Improvement

By Generic

395672-00 Miter Saw Kerf Plate Fits 708 708-B2 708-BR, Yellow, Kerf Board, 2 PCS
  • 16*1.2*0.3 inches, 1.5 ounces
  • High hardness and not easy to break.
  • Yellow.
  • [Simply Installed] 3 screw holes on each side (6 in total)
  • [Good Features] Put the wood on and operate, use to prevent excessive splitting and get cleaner cuts
  • [Replacement Part] 395672-00 kerf plate
  • 2 pieces are needed for complete use
  • [Compatibility] Fit model DW708 Type 1, DW708 Type 3, DW708 Type 4, DW708-B2 Type 2, DW708-BR Type 2
  • Excellent auxiliary accessories
  • Turn the corresponding screw to install, take short time to operate.
  • [Quality Material] Made of strength plastic, smooth surface without bumps

37. Hitachi 322952 Vise Assembly for Hitachi C10FCE and C10FCH Compound Miter Saws -Tools & Home Improvement

By Hitachi

Hitachi 322952 Vise Assembly for Hitachi C10FCE and C10FCH Compound Miter Saws
  • Comes with a 30-day limited warranty
  • Compatible with Hitachi C10FCE and C10FCH Compound Miter Saws
  • Well-built with a simple design
  • Designed for power miter saws
  • Quick setup is intuitive

38. Automatic Vacuum Switch for Power Tools, Etoolcity Unique Current Sensing Technology to Delay Vacuum On to Prevent Circuit Overload, Eliminating Circuit Breaker Tripping -Tools & Home Improvement

By Etoolcity

Automatic Vacuum Switch for Power Tools, Etoolcity Unique Current Sensing Technology to Delay Vacuum On to Prevent Circuit Overload, Eliminating Circuit Breaker Tripping
  • Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work
  • More Safety
  • If the tool motor connected to the ‘A’ port exceeds 30W, the vacuum connected to the ‘B’ port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time
  • Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems
  • Two Installation Methods
  • Etoolcity automatic vacuum switch has a starting threshold of approximately 0.25 amps(30watts at 120V and 60watts at 220V), perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum
  • Adopting high-cost, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W
  • Both ways are very strong
  • Unique Current Sensing Technology
  • Make the Work More Effective
  • Suitable for Most Medium Duty Workloads
  • You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall
  • The switch’s shell has PC+ABS V0 grade flame retardant material, it is more reliable and safe to protect work

39. Microjig ZP750-B2S2 Zeroplay Miter Bar 2-Pack – Best Seller (New, Upgraded), -Tools & Home Improvement

By MICRO JIG

Microjig ZP750-B2S2 Zeroplay Miter Bar 2-Pack - Best Seller (New, Upgraded),
  • Includes 2 ZEROPLAY miter bars, 2 ZEROPLAY miter stops and cross cut jig plans
  • Fits standard (3/4″ x 3/8″) T miter slots, ShopSmith and General miter tracks
  • No slop, side-to-side play or seasonal warping
  • Hassle-free miter bars using One-Touch Calibration
  • Calibrate and adjust bar thickness while attached to sled
  • Build Big Table Saw Sleds Fast!
  • Top-down installation for easy and fast mounting to jigs, fixtures and sleds

40. Deluxe Heavy Duty Rolling Miter Saw Stand with 8 in Wheels 330 Lbs Load Capacity Black and Grey Single Pack WK-MS029E-2 -Tools & Home Improvement

By WORKESS

Deluxe Heavy Duty Rolling Miter Saw Stand with 8 in Wheels 330 Lbs Load Capacity Black and Grey Single Pack WK-MS029E-2
  • QUICK-RELEASE MOUNTING BRACKETS: Allow Easy and Secure Mounting of Miter Saw to Stand
  • EXTENDING THE SUPPORT ARMS:Miter Saw Stand extends from 45.6 in to 78.7 in
  • ROBUST RUBBER WHEELS: Two 8 in wheels for for convenient transport around the jobsite
  • FREE PROVIDED EXTRA CROSS SUPPORT :Allow for Miter Saws That The 4 Holes Shape a trapezoid pattern (some saws) and the 3 holes shape triangular (few saws)
  • RUGGEDLY BUILT DESIGN:330 lbs Load Capacity Adjustable Roller Supports from 35.4 in to 39.3 in

Related Posts:

41. Replacement Anti Dust Cover Bag For 255 Miter Saw with Zipper, Dust Bag for Belt Sander Parts Miter Saw Accessories -Tools & Home Improvement

By XHBAN

Replacement Anti Dust Cover Bag For 255 Miter Saw with Zipper, Dust Bag for Belt Sander Parts Miter Saw Accessories
  • The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
  • 1pc Anti-dust Cover Bag for 255 Miter Saw Belt Sander Parts
  • Please allow slight manual measurement deviation for the data.
  • Capture sawdust to keep your store and countertops clean.
  • Our Anti-dust Cover Bag is made of iron wire + nylon cloth,Well made and durable.
  • The dust cover bag with bottom zipper for easy storage and transport.

42. THE SMART CUT Aluminum Table Fence 18 ft with Universal Saw Attachment Mounts & Measuring System | For Any Portable Chop or Miter Saw Stand | Compact & Lightweight | Easy Setup Jobsite Table -Tools & Home Improvement

By The Smart Cut

THE SMART CUT Aluminum Table Fence 18 ft with Universal Saw Attachment Mounts & Measuring System | For Any Portable Chop or Miter Saw Stand | Compact & Lightweight | Easy Setup Jobsite Table
  • SATISFACTION GUARANTEED: Made in the USA and Veteran Owned, we are confident you will love our miter saw products
  • Our miter saw accessories are heavy-duty, yet fast and easy to set up and tear down so you can go home at the end of the day
  • This table eliminates board struggle at the saw and keeps boards on plane for precise, accurate cutting.
  • It’s a great addition to your miter saw stand, the table breaks down into (4) 4.5ft sections, it fits easily into your truck bed
  • You will spend half your time at the saw, so you can spend more time on the work that needs to be done
  • Cost, quality, and versatility make this a superior product to other miter saw tables, miter saw fences, and miter saw accessories competitors.
  • Table sections can be configured left or right of the saw for cutting work pieces of any size
  • We are committed to providing the highest level of customer satisfaction
  • Also allows for repeated cuts of the same length by locking the measuring system in place with a provided C-clamp or any use your own spring or pressure clamp.
  • It works on straight cuts or inside/outside miter angles
  • Your satisfaction is our #1 priority.
  • Use your own tape with the Measuring System, and you won’t have to pull a tape and mark boards at the saw anymore
  • COMPACT & LIGHTWEIGHT: The aluminum Table Fence is very lightweight, portable, and jobsite tough
  • If you are ever unsatisfied, reach out to us directly, and we will do all we can to make it right
  • Work faster with the same if not better accuracy
  • EASY & SMART DESIGN: Quickly allows you to shift table lengths left and/or right of the saw
  • FAST & ACCURATE CUTTING: Cutting trim or multiple boards to specific lengths takes time
  • LESS BOARD STRUGGLE: The Smart Cut Aluminum Table Fence universally attaches to any saw or stand (not included) giving you a flush fit to your saw back fence and base
  • There’s no electronics that break, need constant calibration, or batteries, just the tape measure that you already trust.

43. Safety Woodworking Push Block and Push Stick Package 5 Piece Set In Safety Orange Color, Ideal for Woodworkers and Use On Table Saws, Router Tables, Jointers and Band Saws -Tools & Home Improvement

By Peachtree Woodworking Supply

Safety Woodworking Push Block and Push Stick Package 5 Piece Set In Safety Orange Color, Ideal for Woodworkers and Use On Table Saws, Router Tables, Jointers and Band Saws
  • The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table
  • The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.
  • Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block
  • Must let the rubber soles dry for 24 hours prior to using them again.
  • The soles are also washable with with warm water
  • The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects
  • Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.
  • This provides the user the ability to see exactly there hands are at during the cutting or milling process
  • All five devices help prevent kickback and protect your fingers and hands during your cutting process
  • Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use
  • This five piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer
  • From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.
  • The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand

44. Mechanical Carpenter Pencils Set with Marker Refills and Carbide Scriber Tool, Solid Deep Hole Woodworking Pencils Marker Marking Tools with Built in Sharpener for Architect Construction -Office Products

By Enhon

Mechanical Carpenter Pencils Set with Marker Refills and Carbide Scriber Tool, Solid Deep Hole Woodworking Pencils Marker Marking Tools with Built in Sharpener for Architect Construction
  • Deep Hole Marker: the construction pencils have a 45 mm long nib design, which can reach tight areas that other woodworking pens can’t; Refills of 3 colors can distinguish marks with different meanings and can mark on dark surfaces
  • Built in Sharpener Mechanical Pencil: every of the wax pencil comes with a built in sharpener on top of the mechanical drawing pencils for your convenience
  • Package Includes: the woodworking tools set comes with 2.8 mm 3 pieces deep hole woodworking pencils with 12 refills, 2 mm 3 pieces mechanical pencils with 24 refills, and 1 engraving pen; Multiple tools can meet your different woodworking marking needs
  • Quality Marker Marking Tool: the design of the refill extends the life of the woodworking marker, easy to use, strong and hard to be broken, suitable for carpenters, builders, businessmen, or anyone who needs a tough pencil that will mark a variety of surfaces
  • Carbide Scribe Tool: the metal marking pen adopts a tungsten carbide tip, which can be marked on hard materials, such as hardened steel, stainless steel, ceramics and glass, an essential machining tool can provide precise line

45. Dewalt 608563-01 Replacement Blade Wrench for Dewalt Miter Saws -Tools & Home Improvement

By DEWALT

Dewalt 608563-01 Replacement Blade Wrench for Dewalt Miter Saws
  • Wear work gloves to protect your hands when installing this part
  • Fits Various Dewalt Models Including: DW706, DW708, DW712, DW715, DW716, DW718, DW713, DWS782
  • This part replaces obsolete part #: 397196-00 and 608563-00
  • This item works with the following types of products: Miter Saw, Saw
  • Please note: Consult owner’s manual for proper part number identification and proper installation

46. VEVOR Precision Miter Gauge, 18″ Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop, Miter Saw Fence w/Laser Marking Scale -Tools & Home Improvement

By VEVOR

VEVOR Precision Miter Gauge, 18  Aluminum Table Saw Miter Gauge w  60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop, Miter Saw Fence w Laser Marking Scale
  • The miter gauges are flat without burr, secure, and hands-free.
  • ​Additional trim blocks raises working efficiency
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness
  • Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle.
  • 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees.
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot
  • Precise Angle Cutting: This table saw accessory is 0.04 inch / 1 mm high precision
  • Laser marking technology is friction-resistance to ensure accuracy
  • Miter gauge fence system is currently a must-have for every family.
  • Metric and imperial scale makes your work more convenient
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table
  • The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting.
  • The adjustable, solid aluminum head is machined with 11 positive stop holes
  • It also can be used for router tables and jointers
  • It is an economical solution for your table saw crosscutting needs
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat

47. BOSCH MS1233 Crown Stop Kit for BOSCH Miter Saws, Includes Mounting Knobs and Hardware -Tools & Home Improvement

By BOSCH

BOSCH MS1233 Crown Stop Kit for BOSCH Miter Saws, Includes Mounting Knobs and Hardware
  • Kit Includes: Crown Stops (Left and Right), Mounting Knobs and Hardware
  • Easily positioned out of the way on the tool when not in use
  • Allows crown molding to be nested against fence for simple miter cuts

48. 2 Pack 146726-02 Miter Saw Kerf Plate Parts Fits Black & Decker DeWalt DWS715 DWS716 DWS713 DWS716XPS 3660 3680 DW703 DW704 DW705 -Tools & Home Improvement

By Lrcipru

2 Pack 146726-02 Miter Saw Kerf Plate Parts Fits Black & Decker DeWalt DWS715 DWS716 DWS713 DWS716XPS 3660 3680 DW703 DW704 DW705
  • 146726-02 Kerf Plate Replacement Part
  • Includes (2) 146726-02 Kerf Plates
  • Compatible with: 3660 Type 1, 3660 Type 2, 3660 Type 3, 3680 Type 1, 3680 Type 2, 3680 Type 3, DW703 Type 1, DW703 Type 3, DW703-B2 Type 1, DW703-B2 Type 2, DW703-B2 Type 3, DW703-B3 Type 1, DW703-B3 Type 2, DW703-B3 Type 3, DW703-BR Type 3, DW704 Type 1, DW704 Type 2, DW704 Type 3, DW704 Type 4, DW704 Type 4A, DW704 Type 5, DW705 Type 1, DW705 Type 2, DW705 Type 3, DW705 Type 4, DW705 Type 4A, DW705 Type 5, DW705 Type 6, DW705 Type 7, DW705 Type 8, DW705-220 Type 1, DW705-220 Type 2, DW705-35 T Measures approximately 8.00 X 2.85 X 0.60 inches
  • Compatible with many DeWalt/Black & Decker Professional Miter Saws

Best Brands

Buying a product from a reputable manufacturer that provides high brand value is one of the most essential things. Based on my research, here are the top brands that make the best miter saw accessories.

  • DEWALT
  • OSHLUN
  • REEKON
  • Rousseau
  • LEXIVON
  • WEN
  • Leecraft
  • RitPin
  • FACULX
  • Fabbay

The Buyer’s Guide

Although the aim of this list is to help you choose the best option for your needs. This guide shall help you make an informed purchase decision. Here are the few things to consider when choosing a miter saw accessories.

1. Features

There’s no point in purchasing a miter saw accessories that doesn’t solve your usage needs. Sometimes, even the best option wouldn’t have all the options you’d need. That’s why list down all your feature requirements and make sure that the option you’ve chosen comes with all of them.

2. Budget

Budget plays an important role, if it wasn’t for the budget, wouldn’t everyone purchase the most expensive option? However, before you decide the budget, I’d recommend you to make a list of features you’d need. In case a feature you need the most isn’t available in your budget range, then there’s no point in buying it, is there?

My advice is to make sure that the product has all the features you need then decide the budget. If a product you’ve chosen isn’t having all the features you need, then you should consider increasing your budget.

3. Value For Money

There are times when you shall come across various miter saw accessories that shall have all the features you need. However, the price difference shall exist. In a situation like this, it is recommended to value each feature and make sure that you’re not overpaying for a feature you wouldn’t use.

4. Brand, Customer Support, & Warranty

Purchasing a product from a reputed brand is very important. Not only does it guarantee high-quality build, but you also get much better customer support.

You should also make sure that it has a decent warranty, it is really helpful in case a product breaks down due to manufacturing defects. Also, repairs during warranty are generally free of cost (depends on service terms).

5. Individual Product Reviews

You don’t have to watch individual reviews of each miter saw accessories in this list. However, pick 2-3 options that have all the technical aspects according to your usage needs. Once you’re ready with it, go to YouTube/Amazon and look at video/customer reviews to make sure that the existing buyers are satisfied with the product.

The FAQs

Which is the best miter saw accessories?

According to my research, the DEWALT Miter Saw Mounting Brackets, 2 Pack, 12 inch Blade Length, Retractable Clamps (DW7231) is the best option.

Is DEWALT a reliable brand?

It’s one of the best brands, not only does it make the top-rated miter saw accessories, but it also is known for its exceptional service.

Which is the cheapest yet powerful miter saw accessories?

According to me, the LEXIVON Aluminum Miter Saw Protractor | 7-Inch Rust Proof Angle Finder Featuring Precision Laser Engraved Scales (LX-230) is one of the cheapest options available and yet has all the features.

Are there deals going on?

A few of the options in our article are currently available for a discounted price. However, check out the product listing to find more information.

What brands should I consider when purchasing?

Based on my research, these are the top 5 brands: DEWALT, OSHLUN, DEWALT, DEWALT, and DEWALT.

Should I buy it online or go to an offline store?

Shopping online comes with a few advantages such as discounted pricing, quick delivery at home. However, if you’re in a hurry or can find the product for a cheaper price in the offline market, consider visiting the offline store.

The Verdict

Choosing the right product isn’t easy and for many of them it could be a time consuming task. However, with this guide, my aim is to help you guys find the perfect miter saw accessories for your needs.

I’ve done a huge research to ensure that options I’ve listed are among the best. Like mentioned above, I also interviewed many experts to make sure that the enlisted models are high quality.

I hope that you’re able to find the right miter saw accessories for your usage. If you are still struggling to find one, feel free to comment below or contact me.

About the author

Jeff Lampkin

Jeff Lampkin was the first writer to have joined gamepolar.com. He has since then inculcated very effective writing and reviewing culture at GamePolar which rivals have found impossible to imitate. His approach has been to work on the basics while the whole world was focusing on the superstructures.