Car & Vehicle Electronics Product Guides

47 Best kenwood amps in 2023: According to Experts.

Written by Jeff Lampkin

You could get any random kenwood amps, but if you’re looking for expert advice on choosing the best one for your needs then you’ve arrived at the right place.

It doesn’t matter what your kenwood amps needs are or what your budget is, because I’ve done an in-depth analysis to include the best-rated options suitable for diversified usage needs and different budget ranges.

To make this list, I’ve spent 90 hours researching kenwood amps from the best brands such as: Skar Audio, Kenwood, Skar Audio.

Note: Make sure that option you’re choosing has all the features you need. Afterall, is there any point in purchasing something that’s not usable?

47 Best kenwood amps in 2023: After 90 Hours of Research

To make this list an unbiased resource for choosing the best kenwood amps, I contacted 10 experts and discussed various aspects to consider. After a huge discussion, I went across customer reviews, researched the reputed brands, and a lot of other things. Because my aim is to recommend products that are highly value for your money.

1. Kenwood 500W 2 Channels Performance Standard Series Stereo Power Car Amplifier with 4 Gauge Blue Amplifer Kit and Gravity Magnet Phone Holder Bundle -Dual-Channel Amplifiers

By Kenwood

  • Bridged at 4ohms: 170W x 1ch Frequency Response: 20Hz – 50kHz
  • Dimensions W x D x H (mm): 230 x 167 x 56
  • Low Pass Filter: 80Hz, -18dB/oct Speaker Level Input: Yes
  • Maximum Output Power: 500W RMS Power at 4ohms: 70W x 2ch RMS Power at 2ohms: 85W x 2ch
  • Signal to Noise Ratio: 100dB

2. Kenwood 500W 2 Channels Performance Standard Series Stereo Power Car Amplifier with 4 Gauge Red Amplifer Kit and Gravity Magnet Phone Holder Bundle -Dual-Channel Amplifiers

By Kenwood

  • Low Pass Filter: 80 Hz (-18 dB / oct.)
  • Frequency Response: 5Hz-50kHz (+0dB, -3dB), Input Impedance: 10k ohm, Speaker Impedance: 4Ω (2Ω to 8Ω allowable) Bridged connection 4Ω to 8Ω allowable
  • Maximum Power Output: 400W, Amplifier Type: Class AB, Signal to Noise Ratio: 95dB (Reference: Rated Power into 4Ohms at 14.4V)

3. Kenwood KAC-9106D 2000W Monoblock Class D Car Audio Power Amplifier -Dual-Channel Amplifiers

By Kenwood

  • Mono subwoofer amplifier
  • Speaker-level inputs with signal Sensing turn-on
  • Class D amp design
  • 500 watts RMS x 1 at 4 ohms (1, 000 watts x 1 at 2 ohms)
  • Variable low-pass filter (50-200 Hz at 24 dB per octave)

4. Kenwood X802-5 eXcelon 500-Watt Class D 5-Channel Amplifier -Dual-Channel Amplifiers

By Kenwood

  • Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.
  • High-Resolution Audio is high-quality sound that exceeds CD standard
  • Detachable sliding terminal cover offers a sleek design and easier installation.
  • All terminals and connections are on one side for easier installation and a cleaner look.
  • Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
  • High-resolution audio captures and beautifully expresses all the details of your favorite music
  • Output Coil with Magnetic Shield prevents magnetic flux from radiating from the subwoofer’s coil, resulting in reduced noise and enhanced sound quality.

5. Kenwood KAC-M1814 4-Channel Compact Bridgeable Marine/Motorsports 400W Max Power Digital Amplifier -Dual-Channel Amplifiers

By Kenwood

  • 1m (3.3ft) RCA Cable
  • Digital Amplifier Technology
  • 2 Ohms Load Capability
  • Power MOS-FET Switching Power Supply
  • Speaker Level Input w/ Signal Sensing Turn-on

6. BOSS Audio Systems PT1600 2 Channel Car Amplifier – Phantom Series, 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable -Dual-Channel Amplifiers

By BOSS Audio Systems

  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers
  • – BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer so long as the purchase is made through We strongly encourage professional installation of this product to ensure proper and safe functionality
  • Power – 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms
  • Variable Bass Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
  • Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
  • Variable Gain Control – The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Specs – Dimensions 14” x 10 3” x 2 3” Weight 9 lbs

8. Kenwood XR401-4 eXcelon 400-Watt 4-Channel Amplifier -Dual-Channel Amplifiers

By Kenwood

  • High-resolution audio captures and beautifully expresses all the details of your favorite music.
  • High-Resolution Audio is high-quality sound that exceeds CD standard
  • Operating Voltage: 14.4V (11 – 16 V allowable)
  • Special capacitors and inductors have been carefully selected for the digital amplifier’s LC filter which is essential for achieving highresolution audio.

9. Kenwood KAC-M3004 Compact 4 Channel Digital Amplifier -Electronics

By Kenwood

  • 2o: 75 watts x 4
  • Peak power: 600 watts
  • Signal sensing turn-on
  • 4o: 50 watts x 4
  • Rms power

10. Kenwood 1177524 Compact Automotive/Marine Amplifier Class D Kac-M1824BT, 180W RMS, 400W PMPO, 4 Channel -Multichannel Amplifiers

By Kenwood

  • New Kenwood 4 channel Bluetooth marine atv motorcycle amplifier (kacm1824bt)
  • Peak power: 400 watts
  • 45 watts x 4 at 4 ohms

11. Kenwood KAC-D8105 5 Channel 1600 Watts Max Power Amplifier -Multichannel Amplifiers

By Kenwood

  • Features: 5 Channel Amplifier
  • RMS Power: 50 watts RMS x 4 + 300 watts at 4 Ohms | 75 watts x4 + 500 watts at 2 Ohms | Peak Power: 1600 watts
  • CEA-2006 compliant, Low Pass Filter, High Pass Filter, Speaker Level Input, Signal Sensing Turn On, Bass Boost (Sub), and Dimensions: 9″ W 2-3/16″ H 7-3/8″ D.

12. Kenwood Excelon P-XR600-6DSP 6-Channel Car Amplifier with Digital Signal Processing and Maestro AR Interface -Multichannel Amplifiers

By Kenwood

  • Many new cars equipped with premium amplified systems are nearly impossible to replace and very difficult to upgrade the audio performance
  • The HEX type design allows for maximum tightening and contact onto the wire.
  • These HEX-type terminals can accommodate up to AWG 4 – AWG 6 battery and ground wire thickness for better voltage maintenance from the vehicle’s battery
  • The listening position, advanced equalization and filtering can be set during installation and the setting stored in memory
  • The 32-Bit 192kHz DSP gives the flexibility of independent tuning and equalization that is required with the variance of speakers and location challenges being used in a typical system
  • The HEX type design allows for maximum tightening and contact onto the wire.
  • A simplified mode is available for day to day use.
  • The channel flexibility allows any function or tuning on all 10 channels making it one of the most versatile solution based amplifiers on the market today.
  • The XR600-6DSP when combined with an iDatalink Maestro AR can use a true stereo signal from the existing OEM stereo and translate all the CAN-Bus communication of the original radio to the XR600-6DSP
  • Use the KENWOOD DSP Control App (compatible with iPhone and Android) to setup the XR600-6DSP
  • Integrates with many Chrysler, Dodge, Fiat, Ford, Jeep, Lexus, Maserati, Ram, Subaru and Toyota premium systems, with more vehicles to follow.
  • These HEX-type terminals can accommodate up to AWG 8 – AWG 12 speaker wire thickness for better signal delivery to speakers

13. Kenwood X502-1 eXcelon 500-Watt @ 2 Ohms Class D Subwoofer Amplifier -Multichannel Amplifiers

By Kenwood

  • Detachable sliding terminal cover offers a sleek design and easier installation.
  • Output Coil with Magnetic Shield prevents magnetic flux from radiating from the subwoofer’s coil, resulting in reduced noise and enhanced sound quality.
  • All terminals and connections are on one side for easier installation and a cleaner look.
  • The Class D design also allows the amplifier to be built on a small chassis, and installed where space is limited.
  • The amplifier design is Class D, which uses digital switching power supplies
  • The result is the amplifier runs more efficiently, generating less heat than Class AB amps
  • Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.

14. Kenwood KAC-M3001 600W Class D Monoblock Compact Digital Car/ATV/Marine Certified Amplifier -Multichannel Amplifiers

By Kenwood

  • RMS Power Rating: 4 ohms: 200 watts x 1 chan
  • Compact Series Monoblock Class D Car / Marine Amplifier
  • / 2 ohms: 300 watts x 1 channel
  • Pulse Width Modulated MOSFET power supply
  • Operating Voltage : 14.4V(11-16V allowable)
  • LED power (green) and protect (red) indicators: Soft start turn-on
  • Max power output: 600 watts x 1 channel

15. Kenwood 2156568 KAC-M1804 Compact 4-Channel Amplifier -Multichannel Amplifiers

By Kenwood

  • Kac-m1804 – Kenwood 4-channel 400w class d compact digital car amplifier
  • Extruded aluminum heat sink design
  • Conformal coated circuit board suitable for marine applications
  • Rms power rating: 4 ohms: 45 watts x 4 Chan, max power output: 400 watts

16. BOSS Audio Systems PF2200 Phantom 2200 Watt, 4 Channel, 2 4 Ohm Stable Class AB, Full Range, Bridgeable, Mosfet Car Amplifier with Remote Subwoofer Control -Multichannel Amplifiers

By BOSS Audio Systems

  • 550 W MAX Power @ 2 Ohm x 4 Channels
  • Low and High Level Inputs, Variable Filter, Variable Bass Boost
  • 275 W MAX Power @ 4 Ohm x 4 Channels
  • 1100 W MAX Bridged Power @ 4 Ohm x 2 Channels
  • Dimensions: Depth 15.5” x Width 10.3” x Height 2.3”
  • Full-Range, Class A / B Topology, MOSFET Power Supply
  • Remote Subwoofer Control, Red LED Backlit Illumination
  • 6 Year Platinum Online Dealer Warranty

17. Kenwood Kac-M8005 5-Channel Power Amplifier -Multichannel Amplifiers

By Kenwood

  • + N/A
  • RMS Power Rating: 4 ohms: 50 watts x 4 chan
  • Bridged, 4 ohms: 150 watts x 2 chan
  • 2 ohms: 75 watts x 4 chan
  • Dimensions: 9″W x 7 3/8″L x 2 3/16″H
  • + 300 watts x 1 chan
  • Total power output: 1600 watts
  • + 500 watts x 1 chan
  • KAC-M8005 – Kenwood 5-Channel 1600W Max Conformal Coated Bridgeable Marine Power Amplifier
  • CEA-2006 Compliant Amplifier

18. Kenwood KFC-1653MRW 6.5″ 2-Way Marine Speakers Pair (Tan) -Multichannel Amplifiers

By Kenwood

  • Woofer: Water Resistant PP Cone
  • Impedance: 4 ohms
  • Frequency Response: 60Hz – 20,000Hz
  • Mounting Depth: 2-7/16″
  • Tweeter: 1″ Balanced Dome Tweeter

19. Kenwood X302-4 eXcelon 50 Watts x 4 4-Channel Class D Amplifier -Multichannel Amplifiers

By Kenwood

  • Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
  • Detachable sliding terminal cover offers a sleek design and easier installation.
  • High-resolution audio captures and beautifully expresses all the details of your favorite music
  • The result is the amplifier runs more efficiently, generating less heat than Class AB amps
  • Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.
  • High-Resolution Audio is high-quality sound that exceeds CD standard
  • All terminals and connections are on one side for easier installation and a cleaner look.
  • The Class D design also allows the amplifier to be built on a small chassis, and installed where space is limited.
  • The amplifier design is Class D, which uses digital switching power supplies

20. Kenwood XR601-1 eXcelon 600-Watt Monoblock Subwoofer Amplifier -Electronics

By Kenwood

  • Special capacitors and inductors have been carefully selected for the digital amplifier’s LC filter, which is essential for achieving high resolution audio
  • These high-performance parts reduce noise and distortion and ensure excellent sound quality.
  • As a result, the noise level has been reduced by up to 40%.
  • The wired remote control allows you to adjust the volume of a subwoofer when connected to the head unit.
  • The noise reduction system employs a special layout that separates the analog circuit, digital amplifier circuit and power supply circuit
  • By using a down-firing subwoofer and superior technologies, the audio system generates high-quality sound and powerful bass, while still being compact.
  • The feedback value of the current XR Amplifier has been optimized to improve the S/N ratio
  • This keeps interference between the circuits to a minimum, decreasing noise and thereby achieving high performance and sound quality.

Related Posts :

21. Kenwood P-W804B 8 Inch Oversized Car Audio Loaded Subwoofer in Ported Enclosure -Multichannel Amplifiers

By Kenwood

  • 900 watts max
  • Cta 2031 Certified so you know wattage ratings aren’t inflated
  • 300 watts RMS
  • Voice coil: single 4 ohm
  • Power handling:

22. Kenwood P-XW1221SHP 12″ High Performance 500-Watt 2-Ohm Subwoofer Enclosure -Electronics

By Kenwood

  • Extra thick legs support the weight of the system when installed in a down-firing application
  • The Kenwood Excelon P-XW1221S ported subwoofer enclosure features a single heavy-duty 2Ω, 12″ driver that can handle 500W RMS with peak power up to 2000W.
  • This ensures the low frequency energy is transmitted without loss, resulting in powerful, impactful bass.
  • The P-XW1221S is constructed of 5/8″ thick MDF (Medium Density Fiberboard) with a 3/4″ thick baffle, providing outstanding strength and durability for maintaining tight accurate bass at high volumes.
  • The injection-molded Polypropylene cone features a dual area cap that provides the rigidity needed for high-power handing while delivering accurate bass.
  • The P-XW1221S includes a single pair of nickel-plated spring-post connectors that can accept speaker wire up to 8AWG.

23. Kenwood DDX6906S 6.8″ DVD Touchscreen Receiver w/ Apple CarPlay and Android Auto -Multichannel Amplifiers

By Kenwood

  • High-Resolution Audio Ready
  • High-Quality Music Parts
  • Apple CarPlay & Android Auto Ready
  • 6.8″ WVGA Clear Resistive Touch Panel
  • Parking Guide Lines

24. Kenwood KSC-PSW8 250W Max (150W RMS) Single 8″ Under Seat Powered Subwoofer Enclosure W/Remote Control -Multichannel Amplifiers

By Kenwood

  • 150 watts RMS power (250 watts maximum)
  • Sensitivity: 81 dB
  • Class D amplifier
  • Frequency response: 35-150 Hz

25. Rockville dB15 6000 Watt Peak/1500w RMS Mono 2 Ohm Amplifier Car Audio Amp -Multichannel Amplifiers

By Rockville

  • Status Mode LED Indicator
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  • Subsonic Filter: 15Hz – 55Hz.
  • Minimum THD at Rated Power: <0.1%
  • 8 Volt Preamp Circuitry
  • Dimensions: (W x H x L)9″ x 2.4″ x 17.8″
  • Optical Coupler Class “D” Technology
  • 150 Amp Fuse
  • Rockville dB15 6000 Watt Peak/1500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp.
  • RCA Preamp Line Output
  • – 4 Ohm: 3600 Watts x 1 Channel.
  • – 2 Ohm: 1500 Watts x 1 Channel <1% THD+N
  • Over Voltage Protection at 16V.
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
  • Remote Dashboard Subwoofer Control
  • Phase Control Switch
  • – 2 Ohm: 6000 Watts x 1 Channel
  • Damping Factor: >150 @ 100Hz
  • High-Speed MOSFET Power Supply
  • Full IC-Controlled Protection Circuitry
  • S / N Ratio: >90dB
  • – 4 Ohm: 900 Watts x 1 Channel <1% THD+N.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  • Low Pass Filter: 50Hz – 250Hz
  • Frequency Response: 15Hz – 250Hz
  • Mute and Delay Soft Start System.
  • Under Voltage Protection at 10V
  • Fully Adjustable 12dB Bass Equalizer

26. Kenwood P-XW1221D Dual 12″ Preloaded 2-Ohm Subwoofer Enclosure -Electronics

By Kenwood

  • polypropylene cone with diamond array pattern // stress controlled spider
  • ported enclosure with two 12″ subwoofers // wired for 2 ohms total impedance
  • spring-post terminals accommodate up to 8-gauge wire // can be installed as front-, rear-, or down-firing, grilles included
  • total impedance: 2 ohms // frequency response: 29-300 Hz
  • 5/8″ MDF construction with 3/4″ MDF baffle // power handling: 600 watts RMS (2000 watts peak)

27. Rockville dB55 4000 Watt Peak/980w RMS 5 Channel Car Amplifier + Amp Kit -Multichannel Amplifiers

By Rockville

  • – 2 Ohm 240 Watts x 4 + 1000 Watts x 1, – 4 Ohm: 160 Watts x 4 + 600 Watts x 1, Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song, – 2 Ohm 480 Watts x 4 + 2000 Watts x 1, – 4 Ohm: 320 Watts x 4 + 1200 Watts x 1, High-Speed MOSFET Power Supply, Rugged switching MOSFETs for Class D in CH5, Under Voltage Protection at 10V, Over Voltage Protection at 16V, Optical Coupler Class “AB” +”D” Technology, Studio-Grade Bipolar Output Stage Transistors
  • Features of dB55: Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier, CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc), – 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N, – 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N, RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc)
  • 3 4 Gauge Clear SuperFlex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 80 Amp AGU Gold Plated Fuse, 7 Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets, Soft abrasion proof insulating jacket allows for 100% improved flexibility, PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
  • Package Includes: (1) Rockville dB55 4000 Watt/2000w RMS 5 Channel Amplifier Car Stereo Amp, Loud!!, (1) Rockville RWK41 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA’s
  • Rockville RWK41 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit, (2) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 4 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable, 17 16 Gauge Clear Speaker Wire

28. BTECH AMP-U25D Amplifier (Supports DMR) UHF (400-480MHz), 20-40W Output (2-6W Input), Analog and Digital Modes, Compatible with All Handheld Radios: BTECH, BaoFeng, Kenwood, Yaesu, ICOM, Motorola -Two-Way Radios

By BTECH

  • That brand focus allows you to have the best available radios and accessories with the most features, with real USA warranty and support.
  • Recommended Accessory: Pair with the BTECH UT-72 Antenna or NMO-72 Antenna & compatible mount for an easy mobile or field deployed solution.
  • Your handheld radio connects in seconds and can just as easily disconnect and be taken on the go.
  • What’s Included: Amp Body, Mobile Mounting Bracket & Screw set, Radio to Amplifier Antenna Cable (SMA Female to SMA Male), Control Cable (K1 to K1), User Manual, Speaker Microphone & Hanger
  • BTECH is proud to be in the USA, which allows you to have the best available local support for any issue that may arise
  • Kit Includes the necessary cables and interface connectors to easily connect to BTECH and BaoFeng Radios.
  • Easily extend the communication range of your handheld radio; Use the AMP‑U25D to create: an affordable DMR mobile radio with a vehicle mounted antenna, a high power field radio with a field deployed antenna, a home/base radio attached to a mast
  • BTECH only engineers and develops radio products

29. Planet Audio AC1500.1M Monoblock Car Amplifier – 1500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control -Two-Way Radios

By Planet Audio

  • high level inputs: speaker level inputs are commonly referred to as high-level inputs
  • this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
  • most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers
  • power: max power output of 1500 watts at 2 ohms into one channel
  • a low-pass filter will primarily keep high notes out of your subwoofer(s)
  • variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it
  • maximum power output of 750 watts at 4 ohms into one channel
  • this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs
  • low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting
  • low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit

30. 4 New BOSS CH6530 6.5″ 3-Way 600W Car Audio Coaxial Speakers Stereo Red -Electronics

By BOSS Audio Systems

  • 300 Watt MAX (600 Watt per 2 Pairs)
  • Magnet Structure
  • 100Hz 18khz Frequency Response
  • Impedance: 4 ohms Each
  • 40 oz
  • Brand New 2 Pair of Boss 6.5″ 3 Way Car Speakers

31. Rockford Fosgate R400-4D Prime 400 Watt Full Range Class-D 4-Channel Amplifier -Two-Way Radios

By Rockford Fosgate

  • Operating Voltage – 9-16 VDC
  • Featuring RCA pass-thru outputs, 12dB/octave Butterworth crossover, 2/4 channel input switch, 4 Gauge power/ground connectors, and Tri-stage protection covering thermal, over-current and short circuits.Input sensitivity:150 mV to 4 V
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
  • Delivering more bass and treble where you want it most with On-board Punch EQ for +18dB boost @ 45Hz
  • The PRIME R400-4D is an ultra-efficient 4-channel amplifier (1.97″ x 6.77″ x 9.10”) with top mounted controls and delivering 400 Watts RMS of power!
  • Optimized for 4-channel front/rear systems (RMS Power Output: 75 Watts x 4 @ 4-Ohm OR 100 Watts x 4 @ 2-Ohm OR 200 Watts x 2 @ 4-Ohm Bridged)
  • High efficiency, Class D design produces maximum power with minimal strain on the vehicle’s electrical system while being able to power a full-range system

32. Kenwood KMR-D378BT Marine CD Receiver Boat Stereo, Alexa, Bluetooth, Aux, Sirius -Electronics

By Kenwood

  • Allows you to take turns streaming music with your friends and family.
  • Marine CD receiver with Alexa, Bluetooth, Aux and USB interface
  • 3 Pre-outs @ 4 Volt
  • Control Alexa -equipped smarthome devices
  • Front USB Input – 96k/24bit FLAC/WAV Front AUX Input
  • Bluetooth Version 4.2 Built-In Bluetooth – Dual Phone Pairing – Up to 5 Bluetooth devices can be connected to the receiver for BT audio at the same time
  • Available for iOs and Android (connected smartphone with Alexa app is reuires for operation)
  • Alexa Built-In – dedicated Alexa Button enables Alexa function
  • Play music, check the weather & local news

33. Kenwood KDC-BT378U Bluetooth Car Stereo Receiver with CD Player, SiriusXM Ready -Two-Way Radios

By Kenwood

  • 1.5 line LCD display with variable-color illumination settings; Menu selection of Eng/Fr/Sp; Built-in Bluetooth(R) version 4.2 for music streaming and hands-free calling; Ability to connect 2 phones at once; Direct Bluetooth(R) keys; Plays MP3
  • plus high-res FLAC and WAV music files; Built-in Amazon(R) Alexa(R); Compatibel with iPhone(R)/iPod(R); Rapid 1.5 amp charging of select smartphones using USB connection; Aux input; Pandora(R) and Spotify(R) Internet Radio control with iPhone(R) and Android(R); Music Mix feature enables up to 5 Bluetooth(R) devices to be paired to the receiver at the same time for audio streaming with friends or family; SiriusXM(R) ready with purchase of optional tuner and subscription (sold separately); KENWOO

34. Skar Audio Dual 10″ Complete 2,400 Watt SDR Series Subwoofer Bass Package – Includes Loaded Enclosure with Amplifier -Two-Way Radios

By Skar Audio

  • Includes x1 Skar Audio SDR-2X10D4 Dual 10″ Loaded 2,400 Watt Vented Subwoofer Enclosure
  • Includes x1 Skar Audio RP-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier
  • Peak Power: 2,400 Watts
  • All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
  • RMS Power: 1,200 Watts

36. Blaupunkt 1500W 4-Channel, Full-Range Amplifier -Electronics

By BLAUPUNKT

  • This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system
  • 1500W Maximum Power Full-Range Amplifier
  • Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road

37. Power Acoustik EG1-10000D 5000W Class D Monoblock Amplifier, White -Two-Way Radios

By Power Acoustik

  • NOTE: Check User Manual on Technical Specification before use
  • 1 to charge x 5000 watts RMS @ 1 ohm, 12Db bass Boost increases low octave harmonics 1800 phase Shift improves low octave dynamics
  • Dash mount remote bass control knob included
  • 1-Ohm stable monoblock operation for Max power link 2 monoblocks together for double power!

38. Kenwood Bluetooth USB MP3 WMA AM/FM Digital Media Player Dual Phone Connection Pandora Car Stereo Receiver/Free Alphasonik Earbuds -Car Stereo Receivers

By Kenwood

  • Inputs: front USB and AUX inputs
  • Bluetooth with apt for superior sound quality
  • Connect two phones at once
  • Digital media receiver (does not play CDs)
  • 6 EQ curves and 13-band equalizer

39. Kenwood P-XW1241S 12″ 300-Watt 4-Ohm Subwoofer Enclosure -Electronics

By Kenwood

  • The P-XW1241S includes a single pair of nickel-plated spring-post connectors that can accept speaker wire up to 8AWG.
  • Extra thick legs support the weight of the system when installed in a down-firing application
  • The injection-molded Polypropylene cone features a Diamond Array pattern along with an X-Motif dust cap, allowing for excellent control over the resonant frequency while cutting down on unwanted frequencies.
  • The P-XW1241S is constructed of 5/8″ thick MDF (Medium Density Fiberboard) with a 3/4″ thick baffle, providing outstanding strength and durability for maintaining tight accurate bass at high volumes.
  • The Kenwood Excelon P-XW1241S ported subwoofer enclosure features a single heavy-duty 4Ω, 12″ driver that can handle 300W RMS with peak power up to 2000W.
  • This ensures the low frequency energy is transmitted without loss, resulting in powerful, impactful bass.

40. BOSS Audio Systems MC900B 4 Channel Weatherproof Amplifier – Bluetooth, 500 Watts, Bluetooth Multi-Function Remote, Full Range, Class A/B, 4-8 Ohm Stable, Aux-in, RCA Outputs, USB Charging -Car Stereo Receivers

By BOSS Audio Systems

  • Weatherproof: The MC900B has been designed to handle some light weather conditions without giving up on you
  • The included Bluetooth remote control lets you stream your music via your Bluetooth device and use apps like Spotify and Pandora
  • Just plug in and start playing
  • USB Charging: You can charge your USB devices using the USB charging port
  • Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Full Range: With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Just power up the MC900B and hook up some speakers to it
  • Power: 500 Watts Max x 4 @4-Ohms, 94 Watts RMS x 4 @4-Ohms
  • Auxiliary in: The Bluetooth remote is compatible with the audio output from smartphones as well as MP3 players
  • It is great for use in ATVs and boats.
  • Specs: Dimensions – 1.75” x 6.6” x 1.75”, Weighs 2.9 lbs.
  • Warranty: BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com
  • We strongly encourage professional installation of this product to ensure proper and safe functionality
  • Class AB: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal
  • Bluetooth: You do not need a head unit

Related Posts :

41. ALPHASONIK APP122 Complete 1500 Watts Dual 12″ Subwoofers Car Bass Package with Amplifier and Installation Kit Included – 2 Sub Woofers with Grills in Custom Ported Box Loaded Enclosure, Black -Car Stereo Receivers

By ALPHASONIK

  • When protection mode is enabled, the LED indicator on the side panel will illuminate.
  • The ported enclosure is constructed of MDF (Medium-density fiberboard) with black carpet measured at 13.75” high, 29.5” wide, and a depth of 13.5” bottom/9” top.
  • The amplifiers built-in protection circuitry protects your system from input overload, short circuit, and high temperatures
  • Mono Block amplifier features a thermal protection circuit, nickel plated terminal blocks, powder coated chassis, comes with a THD level of 0.2%, and a bass boost control to connect near the driver for optimum loudness control.
  • Our professional installation 8 AWG amp kit provides a 17’ power cable, 3’ ground cable, 17’ remote turn on wire, 17’ RCA cable, ATC fuse, and accessory wire-ties.
  • The APP122 Dual 12” bass package comes with EVERYTHING INCLUDED! 2 Subwoofers in Ported Enclosure | Monoblock Amplifier with Bass Knob | Complete Amplifier Wiring Kit | With a power handling capacity of 1500 Watts Max (500 Watts RMS), this is all you need!

42. Kenwood KFC-W3041 12″ 4 Ohm 2000W Car Subwoofer (Single) with Gravity Magnet Phone Holder Bundle -Car Stereo Receivers

By Kenwood

  • Impedance: 4 ohms / Mounting Depth: 5-3/8 inch
  • Subwoofer Type: 12 inch PP Cone
  • Peak Power: 2000 W (300 W RMS)
  • Frequency Response: 29Hz-300Hz
  • Kenwood KFC-W3041 (Single) + Gravity Magnet Phone Holder Bundle

43. Kenwood X450-4 – 450W 4-Channel Amplifier -Musical Instruments

By Kenwood

  • + 100 watts x 2 chan/ 2 ohms: 75 watts x 2 chan
  • Heavy duty aluminum alloy heat-sink for extreme heat dissipation
  • Pulse Width Modulated MOSFET power supply / LED power (green) and protect (red) indicators
  • + 150 watts x 2 chan / Bridged, 4 ohms: 60 watts x 2 chan
  • RMS Power Rating: 4 ohms: 60 watts x 2 chan
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • + 300 watts x 1 chan.
  • 4-Channel eXcelon Series Full Range Power Car Amplifier

44. Kenwood KAC-9106D 2000W Monoblock Class D Car Audio Power Amplifier + Amp Kit (Renewed) -Car Stereo Receivers

By Kenwood

  • New Kenwood KAC-9106D 2000 Watt Monoblock Class D Car Audio Power Amplifier Amp
  • 4 ohms 500W x 1
  • Rated Input Power
  • **Amplifier**
  • 2 ohms 1000W x 1

45. Skar Audio Single 12″ Complete 1,200 Watt SDR Series Subwoofer Bass Package – Includes Loaded Enclosure with Amplifier -Car Stereo Receivers

By Skar Audio

  • Peak Power: 1,200 Watts, RMS Power: 600 Watts
  • All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
  • Includes x1 Skar Audio SKAR4ANL-CCA 4 Gauge Complete Amplifier Wiring Kit
  • Includes x1 Skar Audio SDR-1X12D2 Single 12″ Loaded 1,200 Watt Vented Subwoofer Enclosure
  • Includes x1 Skar Audio RP-800.1D Class D 800 Watt Monoblock Amplifier

46. Kenwood KCA-RC01A Remote Bass Knob for Select Amplifiers -Electronics

By Kenwood

  • For select Kenwood Excelon amplifiers: Kenwood Excelon X502-1, Kenwood Excelon X802-5
  • The remote module is mounted behind a panel in the car, with its threaded shaft extending through a 5/16″ hole in the panel, held in place using the included washer and hex nut
  • A 19.7′ (6 meter) cable is included, with RJ-25 (phone-type) plugs on both ends, to connect the remote to the amplifier.
  • The KCA-RC01A is a wired remote subwoofer level control for compatible Kenwood amplifiers.
  • The knob is then installed on the shaft.
  • It allows you to adjust the output of the amplifier’s subwoofer channel remotely.

47. Kenwood KMM-BT228U Digital Media Receiver (Does not Play CDs) -Car Stereo Receivers

By Kenwood

  • Control and rapid-charging of select using USB connection connect two phones at once
  • Compatible with most factory steering wheel audio controls
  • Digital media receiver (does not play CDs) Kenwood Remote App lets you control receiver settings with your smartphone
  • 5-line LCD display (white text, black background, blue button illumination) microphone included
  • Built-in Bluetooth (Version 4
  • 2) plays MP3, WAV, AAC, WMA, plus high-res FLAC and WAV music files

Best Brands

Buying a product from a reputable manufacturer that provides high brand value is one of the most essential things. Based on my research, here are the top brands that make the best kenwood amps.

  • Kenwood
  • BOSS Audio Systems
  • Rockville
  • BTECH
  • Planet Audio
  • Rockford Fosgate
  • Skar Audio
  • BLAUPUNKT
  • Power Acoustik
  • ALPHASONIK

The Buyer’s Guide

Although the aim of this list is to help you choose the best option for your needs. This guide shall help you make an informed purchase decision. Here are the few things to consider when choosing a kenwood amps.

1. Features

There’s no point in purchasing a kenwood amps that doesn’t solve your usage needs. Sometimes, even the best option wouldn’t have all the options you’d need. That’s why list down all your feature requirements and make sure that the option you’ve chosen comes with all of them.

2. Budget

Budget plays an important role, if it wasn’t for the budget, wouldn’t everyone purchase the most expensive option? However, before you decide the budget, I’d recommend you to make a list of features you’d need. In case a feature you need the most isn’t available in your budget range, then there’s no point in buying it, is there?

My advice is to make sure that the product has all the features you need then decide the budget. If a product you’ve chosen isn’t having all the features you need, then you should consider increasing your budget.

3. Value For Money

There are times when you shall come across various kenwood amps that shall have all the features you need. However, the price difference shall exist. In a situation like this, it is recommended to value each feature and make sure that you’re not overpaying for a feature you wouldn’t use.

4. Brand, Customer Support, & Warranty

Purchasing a product from a reputed brand is very important. Not only does it guarantee high-quality build, but you also get much better customer support.

You should also make sure that it has a decent warranty, it is really helpful in case a product breaks down due to manufacturing defects. Also, repairs during warranty are generally free of cost (depends on service terms).

5. Individual Product Reviews

You don’t have to watch individual reviews of each kenwood amps in this list. However, pick 2-3 options that have all the technical aspects according to your usage needs. Once you’re ready with it, go to YouTube/Amazon and look at video/customer reviews to make sure that the existing buyers are satisfied with the product.

The FAQs

Which is the best kenwood amps?

According to my research, the Skar Audio Dual 10″ Complete 2,400 Watt SDR Series Subwoofer Bass Package – Includes Loaded Enclosure with Amplifier is the best option.

Is Skar Audio a reliable brand?

It’s one of the best brands, not only does it make the top-rated kenwood amps, but it also is known for its exceptional service.

Which is the cheapest yet powerful kenwood amps?

According to me, the Kenwood KAC-D8105 5 Channel 1600 Watts Max Power Amplifier is one of the cheapest options available and yet has all the features.

Are there deals going on?

A few of the options in our article are currently available for a discounted price. However, check out the product listing to find more information.

What brands should I consider when purchasing?

Based on my research, these are the top 5 brands: Skar Audio, Kenwood, Skar Audio, Rockford Fosgate, and Kenwood.

Should I buy it online or go to an offline store?

Shopping online comes with a few advantages such as discounted pricing, quick delivery at home. However, if you’re in a hurry or can find the product for a cheaper price in the offline market, consider visiting the offline store.

The Verdict

Choosing the right product isn’t easy and for many of them it could be a time consuming task. However, with this guide, my aim is to help you guys find the perfect kenwood amps for your needs.

I’ve done a huge research to ensure that options I’ve listed are among the best. Like mentioned above, I also interviewed many experts to make sure that the enlisted models are high quality.

I hope that you’re able to find the right kenwood amps for your usage. If you are still struggling to find one, feel free to comment below or contact me.

About the author

Jeff Lampkin

Jeff Lampkin was the first writer to have joined gamepolar.com. He has since then inculcated very effective writing and reviewing culture at GamePolar which rivals have found impossible to imitate. His approach has been to work on the basics while the whole world was focusing on the superstructures.