We are supported by readers, when you click & purchase through links on our site we earn affiliate commission. Learn more.

49 Best bushing removal tool in 2022: According to Experts.

You could get any random bushing removal tool, but if you’re looking for expert advice on choosing the best one for your needs then you’ve arrived at the right place.

It doesn’t matter what your bushing removal tool needs are or what your budget is, because I’ve done an in-depth analysis to include the best-rated options suitable for diversified usage needs and different budget ranges.

To make this list, I’ve spent 77 hours researching bushing removal tool from the best brands such as: Tiger Tool, OTC, OTC.

Note: Make sure that option you’re choosing has all the features you need. Afterall, is there any point in purchasing something that’s not usable?

49 Best bushing removal tool in 2021: After 77 Hours of Research

To make this list an unbiased resource for choosing the best bushing removal tool, I contacted 15 experts and discussed various aspects to consider. After a huge discussion, I went across customer reviews, researched the reputed brands, and a lot of other things. Because my aim is to recommend products that are highly value for your money.

1. WINTOOLS 27 Pcs Universal Press & Pull Sleeve Kit Bush Bearing Removal Insertion Tool Set -Automotive

By WINTOOLS

  • 22 Sleeves Material: 40 CR.
  • Fully universal applications on both cars and LCV.
  • 5*pulling spindle 45# Carton steel + nuts sizes: M10, M12, M14, M16, M18.
  • If any part was broken, please contact us!

2. Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4×4 Adapters, for Most 2WD and 4WD Cars and Light Trucks -Automotive

By Orion Motor Tech

  • Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
  • If you are not satisfied with this product or if you have any question, please feel free to let us know.
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES – Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
  • Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
  • PROFESSIONAL GRADE QUALITY AND DURABILITY – Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world
  • ESSENTIAL TOOL FOR BALL JOINT SERVICE – Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
  • ORION MOTOR TECH – We pursue outstanding quality and professional technical support
  • CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE – Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization

3. SCITOO Fit Cars LCV and HGV Engines Universal Press and Pull Sleeve Kit Removal Installation Bushes Bearings Tool Kit -Automotive

By SCITOO

  • Compatible Vehicles : Applicable to many cars and LCV ,HGV Engines
  • Benefit : Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this tool set a long lasting and reliable tool
  • M16)
  • Any question or problem, feel free to contact us
  • Package: 20 x Press Sleeves, Inside Diameter from 34-72mm in 2mm steps, Outside Diameter from 44-82mm in 2mm steps, 4 x Pulling Spindles with nuts and thrust bearings (M10
  • Product Usage: For Removal and Installation of Bearings, Bushes, Seals and cut down the possibility of damaging the bearing or suspension housings
  • Important Note: When doing automotive maintenance always make sure all the tools are correctly used and wear safety glasses and gloves

4. Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS -Automotive

By Orion Motor Tech

  • DURABILITY, this bearing puller set features high hardness and toughness for optimal performance
  • PORTABILITY, comes with a durable storage case, you can neatly collect the tools and easily bring it to anywhere you like.
  • WIDE COMPATIBILITY, comes with various size and type of collets, Blind / Internal /Bearing Puller, this tool set boasts wide compatibility
  • Collets made of chrome molybdenum steel ensure rust-proof performance and long-lasting using.
  • EASY TO USE, this kit is easy to use, just insert the collect and expand it to fit the hole
  • PERFECT FOR PROFESSIONAL AND DIY USE, ideal for pulling jobs and will not damage parts in using, perfect for professional and DIY use.

5. OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump -Automotive

By OTC

  • OTC’s Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings ‘on vehicle’ – no need to remove the spring assemblies to use this tool
  • Completes the job in a fraction of the time that traditional methods take
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing – a huge time savings
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work

6. OTC Tools 5080A Leaf Spring Pin and Bushing Service Set (Truck Front) -Automotive

By OTC

  • Services bushings with diameters from 1-1/4 inch through 1-7/8 inch and pin diameters from 7/8 inch through 1-1/8 inch
  • Service bushing assemblies in many cases without removing leaf spring hangers and spring assemblies from the vehicle
  • Handles all popular OE and aftermarket components including Horton pin and bushing assemblies
  • Delivers 10 tons of hydraulic force to remove and install truck front spring eye bushing assemblies quickly and easily
  • All accessories are included except the hydraulic hand pump which must be purchased separately

7. Orion Motor Tech 21PCS Master Ball Joint Press | Upper and Lower Ball Joint Removal Tool | Automotive Mechanic Tool Set -Automotive

By Orion Motor Tech

  • CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE – Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty ABS plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES – Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with all the receiver tubes and removing/installing adapters needed to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, will service perfect for vehicles having the Dana 28, 30, 35, 44, 60 axle
  • ESSENTIAL TOOL FOR BALL JOINT SERVICE – Use the ORION MOTOR TECH 22PCS Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with multi-size adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
  • Constructed from heavy-duty forged solid carbon steel with anti-rust black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
  • If you are not satisfied with this product or if you have any question, please feel free to let us know.
  • ORION MOTOR TECH – We pursue outstanding quality and professional technical support
  • Package include: 9x Adapters, 1x Center Rod, 1x C-Frame, 1x Install Adapter, 1x Install Cup, 1x Install Cup Adapter, 1x Receiving Cup, 3x Receiving Tube, 1x Removal Adapter, 1x Screw, 1x Sleeve.
  • PROFESSIONAL GRADE QUALITY AND DURABILITY – Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world

8. SCITOO 27PCS Automotive Universal Tools Press and Pull Sleeve Kit Bush Bearing Removal Insertion Tool Set -Automotive

By SCITOO

  • FUNCTION Designed for the removal and installation of bushes, bearings and seals
  • This professional pull and press sleeve kit set with 5 pulling spindles and nuts.
  • ATTENTION Before purchasing this item, please double check the product details information
  • PACKAGE INCLUDED 22x Press sleeves, 5x Pulling spindles and nuts.
  • RELIABLE High quality 45# Carbon steel and through strict quality inspection
  • FEATURES The whole tool set is with fully universal application for cars, LGV or HGV
  • If you have any questions, feel free to contact us for help.
  • You can buy it with confidence.
  • Suitable for professional mechanic and personal
  • Each socket has a drilled head to locate retaining ball bearing on most breaker bars and impact wrenches to ensure a safe secure fit.

9. Shankly Bushing Removal Tool, Bushing Driver Set, 50 Piece Seal Drive Set -Automotive

By Shankly

  • IMPRESSIVE VARIATIONS: The Shankly bearing and seal driver set has 50 interchangeable discs, giving the user an amazing 2,450 different variations due to each of the 50 discs being interchangeable with each other.
  • Complete set details in description below.
  • INTERCHANGEABLE: All 50 pieces are interchangeable with each other so you get different sized variations in one set, allowing the mechanic to complete the job quickly, professionally and promptly
  • HEAVY DUTY, ORGANIZED CASE: Set comes in a heavy duty, blow molded case with compartments for every piece, making storage and transport easy and manageable.
  • Making the Shankly wheel bearing driver set complete and effective.
  • All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle
  • COMPLETE SET: The discs go from 18mm (.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches)
  • THE RIGHT SIZE: The Shankly bushing removal tool kit allows you to build your own custom bushing driver so you always have the right size for the job.

10. Tiger Tool Brake Anchor Pin Press 16002 -Automotive

By Tiger Tool

  • For use up to 1/2″ impact wrench.
  • Manufactured from high-grade steel for strength and durability.
  • Rigid C-frame with 10-ton capacity
  • Made in Canada
  • Manual, no hydraulics required

11. Rear Shock Eyelet Bushing Removal Install Tool,Bike Shock Bushing Tool for Fox ccdb DU -Sports & Outdoors

By Estink-

  • High Quality MaterialsThis rear shock eyelet bushing removal install tool is made of premium materials, anti-rust and solid, enduring for long term use
  • Designed ForThis shock bushing tool is used to install or remove rear shock eyelet bushings
  • Priduct IncludingOur shock bushing removing tool includes three supporting base adapter: The purple one works for bushings with inner diameter 12mm; and red one for bushings with inner diameter 12.7mm; the light blue one for DU bushings.
  • High Quality MaterialsThis rear shock eyelet bushing removal install tool is made of premium materials, anti-rust and solid, enduring for long term use
  • Perfect for the repair and maintenance for rear shocks.
  • Easy to UseOur rear shock bushing tool is easy and convenient to use and no damage to the rear shock.
  • Lightweight and PortableThis shock eyelet bushing tool is ultralight and portable, you won’t feel difficult to take it with you while cycling.

12. 8MILELAKE Rear Trailing Arm Bushing Remover and Installer Tool Compatible for Honda Civic -Automotive

By 8MILELAKE

  • Service completely performed on the car.
  • Included in a blow molded case.
  • Service time is only 10 minutes per side, you can save more time, labor and money.
  • Shifting hook design could adjust the size.
  • No removing the trailing arm from the vehicle and using a hydraulic press.

13. CTA Tools 8920 Control Arm Bushing Kit – Compatible with BMW -Automotive

By CTA Tools

  • Designed for Removing and Installing Control Arm Bushings
  • Includes One BMW Rear Control Arm Bushing Kit
  • Includes a Blow-Mold Case
  • Meets the Exacting Quality Standards of CTA Tools
  • Allows for Removal of Bushings While Leaving Control Arm Attached

14. OTC 4244 Freightliner Rear Suspension Bushing Tool -Automotive

By OTC

  • Completes the job in a fraction of the time that traditional methods take
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing – a huge time savings
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings ‘on vehicle’ – no need to remove the spring assemblies to use this tool
  • OTC’s Freightliner Rear Suspension Tool features a robust 15-Ton capacity cylinder and installation/removal adapters

15. Orion Motor Tech 52-in-1 Custom Bushing Driver Tool Set and Transmission Wheel Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit -Automotive

By Orion Motor Tech

  • HEAVY-DUTY DURABILITY: With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use.
  • EASY OPERATION: This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally.
  • PROTECTIVE CARRYING CASE: Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece – great for storage and transport while lengthening the life of the tool set.
  • UNIVERSAL SIZING: This Orion Motor Tech bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job.
  • COMPLETE SET: The discs sizes range from 18mm (.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches)
  • All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle, making for a complete and effective wheel bearing driver set.

16. DHA Ball Joint Press Kit Heavy Duty 4×4 & U Joint Removal Tool -Automotive

By DHA

  • This Ball Joint Separator Set be able to: Remove Upper/Lower Ball Joints, Install Upper/Lower Ball Joints, Remove/Install Brake Anchor Pin, Disassemble/Assemble Universal U Joints.
  • Ball Joint Press Tool Kit / Bushing Removal Tool Fit most American domestic and imported cars and light pickup trucks.
  • Heavy Duty Forged Ball Joint Service Tool / U Joint Removal Tool Kit is excellent for removal and installation of press-fit parts such as ball joints, U joint and brake anchor pins for Most 2WD and 4WD Cars and Light Trucks
  • Ball Joint Removal Tool Made of Strong Carbon Steel, Instruction In English Included ,Plastic Carrying Red Case Package.
  • Heat Treated C Clamp Puller can excellent press rusted parts effortlessly.
  • Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.

17. Dioche Rear Shock Bushing Tool, Anti-Rust Rear Shock Eyelet Bushing Removal Install Tool with 3 Adapters for Bike Maintenance -Sports & Outdoors

By Dioche

  • PREMIUM MATERIAL: This shock bushing tool is made of premium materials, which is anti-rust and solid, enduring for long-term use
  • Practical and useful accessories for your bicycle to make your riding more easier
  • THREE SUPPORTING BASE ADAPTERS: Including three supporting base adapter: The purple one works for bushings with inner diameter 12mm; and the red one for bushings with inner diameter 12.7mm; the blue one for DU bushings
  • LIGHTWEIGHT & PORTABLE: This shock eyelet bushing tool is ultralight and portable, you won’t feel difficult to take it with you while cycling, giving you nice using experience
  • An indispensable part for fun riding
  • VERSATILE USES: The rear bushing shock tool is used to install or remove rear shock eyelet bushings, and perfect for the repair and maintenance for rear shocks
  • CONVENIENT TO USE: Easy and convenient to use, which has no damage to the rear shock, you can use it without worrying

18. ABN Rear Trailing Arm Bushing Tool – Trailing Arm Bushing Remover & Installer – Bushing Press Kit for Honda & Acura -Automotive

By ABN

  • SIMPLE & SAFE DESIGN: Hook design for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, trailing arm, and parts close to the bush with a hydraulic press or disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines, or emergency brake cables
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
  • EASY TO USE: Remove wheels and body lateral link bolts (watch for any camber shims between the body and the link), loosen (not remove) the toe link bolts, remove the trailing arm bush bolts, pull the trailing arm down enough to put on tool (you may need to disconnect brake line bracket/parking brake bracket on trailing arm), apply lubrication to trailing arm bush, use tool to push out the trailing arm bush, clean, lubricate, install new trailing arm bush, reassemble; 14mm socket not included
  • REPLACE CAR BUSHES: Use the ABN Trailing Arm Bushing Removal Tool for replacement of the rear trailing arm bush (moveable metal suspension pieces on the rear of your car that the wheel, brake, and hub connect to) on your Honda or Acura vehicle
  • FITS YOUR VEHICLE: For Honda or Acura vehicles with trailing arm bushings; Applicable for Honda – Civic 1988-2000, CRV 1997-2001, CRX 1988-1991, Del Sol 1993-1997 and Acura – Integra 1994-2001, Integra 1990-1993

19. HFS (R 52-in-1 Custom Bushing Driver Tool Set and Transmission Wheel Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit -Automotive

By HFS

  • [COMPLETE SET]: The discs sizes range from 18mm (0.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches)
  • [EASY OPERATION]: This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally.
  • [PROTECTIVE CARRYING CASE]: Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece – great for storage and transport while lengthening the life of the tool set.
  • [UNIVERSAL SIZES]: Bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job.
  • [HEAVY-DUTY DURABILITY]: With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use.
  • All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle, making for a complete and effective wheel bearing driver set.

20. Compatible for Acura Rear Trailing Arm Suspension Bush Removal Installation Tool Set For Honda CRV -Automotive

By WINTOOLS

  • The special hook designs holds the tool secure during operation.
  • Also fits Honda Civic 1988-2000.
  • A cut away window allows visual access for installing correctly.
  • The Honda CRV has a common fault for MOT failure and this tool allows the rear trailing arm bushes to be removed and installed quickly and effectively.
  • Removal and installation of new bush to Rear Trailing arm without damage to the ABS sensor cable.

Related Posts :

21. Orion Motor Tech 52-in-1 Custom Bushing Driver Tool Set and Transmission Wheel Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit -Automotive

By Orion Motor Tech

  • UNIVERSAL SIZING: This Orion Motor Tech bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job.
  • COMPLETE SET: The discs sizes range from 18mm (.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches)
  • HEAVY-DUTY DURABILITY: With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use.
  • All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle, making for a complete and effective wheel bearing driver set.
  • EASY OPERATION: This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally.
  • PROTECTIVE CARRYING CASE: Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece – great for storage and transport while lengthening the life of the tool set.

22. OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing -Automotive

By OEMTOOLS

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs; Bushing press kit saves a ton of time
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings; Don’t have to remove components from vehicles with this bushing tools set
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more; Cups with bushing press and pull kit allow for hundreds of combinations
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs; The OEM Tools bushing driver set includes 20 different size cups for versatile use
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press; Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible

23. BTSHUB Rear Trailing Arm Bushing Remover and Installer Tool, Bushing Press Kit Copatible for Honda & Acura -Automotive

By BTSHUB

  • FUNCTION: The Rear Trailing Arm Bushing Remover Tool is used for replacement of the rear trailing arm bush (moveable metal suspension pieces on the rear of your car that the wheel, brake, and hub connect to) on your vehicle; Removal and installation of the new bush to Rear Trailing arm without damage to the ABS sensor cable.
  • UNIQUE DESIGN: Hook design for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, trailing arm, and parts close to the bush with a hydraulic press or disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines, or emergency brake cables
  • The tool is stored safely in a beautifully packaged case that can withstand high-strength extrusion
  • APPLICATION: For Honda or Acura vehicles with trailing arm bushings; Suitable for Honda – Civic 1988-2000, CRV 1997-2001, CRX 1988-1991, Del Sol 1993-1997 and Acura – Integra 1994-2001, Integra 1990-1993
  • EASY STORAGE: Comes with a premium well-organized box for easy storage and transport
  • HOW TO USE: Remove wheels and body lateral link bolts (watch for any camber shims between the body and the link), loosen (not remove) the toe link bolts, remove the trailing arm bush bolts, pull the trailing arm down enough to put on the tool (you may need to disconnect brake line bracket/parking brake bracket on trailing arm), apply lubrication to trailing arm bush, use tool to push out the trailing arm bush, clean, lubricate, install new trailing arm bush, reassemble

24. Alltrade Powerbuilt 648604 Kit 25 Upper Control Arm Bushing Service Tool Set for Ford, GM and Chrysler Silver -Brake Tools

By Alltrade

  • Made to be the most reliable tools in the market today
  • 11-Piece tool set for removing and installing press-in bushings
  • For use on rear wheel drive Ford, GM and Chrysler vehicles
  • Made to be the most reliable tools in the market today
  • Storage case includes usage photos
  • Tool solutions for most all situations
  • Built to exceed tool standards
  • For use on autos only – Not designed for trucks
  • Tool solutions for most all situations
  • Allows changing the press-in bushings without removing the control arm
  • Built to exceed tool standards

25. Lisle 29450 Short Anchor Pin Bushing Driver -Automotive

By Lisle

  • Pneumatic bushing driver set removes and installs truck andtrailer 1-3/8″ anchor pin bushings and stuck anchor pins.
  • Includes a 7″ Driver for Applications withLimited Access.
  • Also removes truck leaf spring bushings.
  • Use flanged end to install and tapered end toremove
  • Fit type: Vehicle Specific
  • Double sided cone snaps onto driver to drive out and installbushings

26. DA YUAN Universal Press and Pull Sleeve Remove Install Bushes Bearings Garage Tool Kit -Automotive

By DA YUAN

  • Benefit : Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this tool set a long lasting and reliable tool
  • Product Usage: For Removal and Installation of Bearings, Bushes, Seals and cut down the possibility of damaging the bearing or suspension housings
  • Compatible Vehicles : Applicable to many cars and LCV ,HGV Engines
  • M16)
  • Any question or problem, feel free to contact us
  • Important Note: When doing automotive maintenance always make sure all the tools are correctly used and wear safety glasses and gloves
  • Package: 20 x Press Sleeves, Inside Diameter from 34-72mm in 2mm steps, Outside Diameter from 44-82mm in 2mm steps, 4 x Pulling Spindles with nuts and thrust bearings (M10

27. SE Watch Movement Holder Set (2 PC.) – JT64040 -Brake Tools

By SE

  • Adjustable to fit most watches
  • Can use both sides
  • Great for holding materials while repairing watches
  • 2 pieces in watch movement holder set: small and large
  • Zinc alloy body

28. Watch Press, 18mm to 50mm Watch Back Case Screw Type Closer With 20 Dies Watchmaker Press Tool Set Professional Watch Crystal Bezel Press Watch Repair Tools -Brake Tools

By ZJchao

  • WATCH PRESS FEATURE: Convenient, quick and effortless;Metal, hard and durable;Long lasting,Both upper and lower are M6 threads, compatible for Bergeon 5500A/5500C
  • GOOD STABILITY: Watch Repair Tool Made with good material that won’t cause scratches and marks on your watch face and cover,watch repair tools,high quality and unique appearance,The base has four threaded holes
  • EASY TO USE DESIGN: that helps to press watch crystals and dies without risking any clamps on your hands and on the watch itself,Crafted with high quality cast iron, this Watch Back Case Closer can keep stable without any shakes throughout the watch fixing process
  • ALL KINDS OF DIES: Small size 20 assorted dies for watches of all sizes (18/20 21/23 24/26 28/30 31/32 33/34 36/38 40/42 43/45 48/50),perfect for professional watchmakers and collectors
  • WATCH PRESS TOOL: applies pressure by screwing top handle, this means you have total control how much pressure you use, you can use just enough pressure to fit crystal or case back,Watch Case Closer Perfect tool for replacing watch crystals and snap-back cases

29. Astro Pneumatic Tool 78825 25-Piece Master Front Wheel Drive Bearing Puller Removal & Installer Adapter Kit W/Grade 8 Drive Bolt -Automotive

By Astro Pneumatic Tool

  • Replace wheel bearings without the need for alignment after by keeping the strut assembly and steering knuckle in place during service
  • 25 piece set including detailed use instructions
  • Master set for a wide range of applications
  • Includes heavy duty 7/8″ grade 8 drive bolt for twice the durability of the industry standard
  • Black phosphate coating for a more durable finish

30. OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit, Back & Front Wheel Bearing Puller Kit, Back & Front Wheel Hub Puller, Easy to Use -Wheel Bearing Tools

By OEMTOOLS

  • TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing; Our hub puller tool removes/installs hubs safely from the knuckle; Wheel bearing removal kit removes the need for an alignment after use
  • VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit; This wheel bearing removal tool features all the adapters needed to service a number of foreign and domestic vehicles—BMW, Porsche, VW, and more
  • FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German cars; Install wheel hubs and bearings on most vehicles easily with our wheel bearing press kit
  • DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit’s steel design holds up to the torque required to remove hubs and bearings; The wheel bearing tool removes hubs and bearings without damaging your vehicle’s parts
  • NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool; Save time removing even seized-up wheel hub and bearing assemblies; Our bearing press kit allows mechanics to install wheel bearings without a shop press

31. Tiger Tool Automotive C-Frame Socket Press 10205 -Automotive

By Tiger Tool

  • Hardened self-lubricated steel components to help prevent galling.
  • Rigid C-frame with 2.5 ton capacity.
  • Patent No
  • Manufactured from high-grade steel for strength and durability.
  • 10744627
  • Made in Canada

32. Orion Motor Tech Master Ball Joint Press Kit & U-Joint Puller Service Tool Set 21PCS – Upper and Lower Ball Joint Removal Tool Kit for Ball Joint Service with C-Press -Automotive

By Orion Motor Tech

  • ALL-IN-ONE TOOL KIT: 9x Adapters, 1x Center Rod, 1x C-Frame, 1x Install Adapter, 1x Install Cup, 1x Install Cup Adapter, 1x Receiving Cup, 3x Receiving Tubes, 1x Removal Adapter, 1x Screw, 1x Sleeve.
  • UNIVERSAL COMPATIBILITY: This tool set works with most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, or vehicles with the Dana 28, 30, 35, 44, 60 axles.
  • PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty ABS plastic blow-molded carrying case with handle for safe storage and quick organization
  • PROFESSIONAL-GRADE DURABILITY: Built to last with heavy-duty forged carbon steel with anti-rust black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion.
  • If you are not satisfied with this product or if you have any questions, please feel free to let us know.
  • EASY OPERATION: Use our 21PCS Ball Joint Press Set with multi-size adapters to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.

33. Orion Motor Tech 23-Piece FWD Front Wheel Drive Bearing Adapters Puller Press Replacement Installer Removal Tool Kit -Automotive

By Orion Motor Tech

  • ALL-IN-ONE TOOL KIT: Everything you need for fast & effective front-wheel drive bearing removal and installation
  • INCREASE EFFICIENCY: Designed to work with the steering knuckle and strut assembly still on the vehicle, eliminating the need for front end alignment after service while reducing damage to the hub and bearings.
  • ULTRA-DURABLE: Heavy-duty carbon steel construction with black anodic oxidation coating for ultimate rust-resistant performance.
  • Easily replaces wheel bearings while keeping the steering knuckle and strut assembled on the vehicle.
  • PORTABLE CARRY CASE: Packed in a custom carry case with precision-sized storage slots for each component, made of premium ABS to protect and extend the life of your tools.
  • UNIVERSAL COMPATIBILITY: Works with front-wheel drive hub bearing assembly parts on most front-wheel-drive American domestic and imported cars and small pickup trucks.

34. Streetside Tools SST-0160 – GM 350, 180, 200, 200-4R Extension Housing Bushing Driver/Installer and Removal Transmission Tool/Kit -Automotive

By Streetside Tools

  • For removing bushings with a minimum ID of 1.500″ and a maximum OD of 1.700″
  • Maximum shaft diameter is 1.25″
  • Easy removal and installation of the extension housing bushing, without removing the extension housing.
  • For use on these Transmissions: GM 350, 180, 200, 200-4R, GM Borg-Warner T5 ( Tremtec T-5 )( World-Class T-5 )
  • Made in the USA!

35. Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4wd Adapters, for Most 2WD and 4WD Cars and Light Trucks (BK) -Automotive

By Orion Motor Tech

  • PROFESSIONAL-GRADE DURABILITY: Constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.
  • UNIVERSAL COMPATIBILITY: Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints
  • EASY OPERATION: The ORION MOTOR TECH Ball Joint Press Set with 4×4 Adapters effortlessly removes press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm.
  • If you are not satisfied with this product or if you have any questions, please feel free to let us know.
  • ALL-IN-ONE TOOL SET: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
  • PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization
  • Includes a 4WD adapter for service on 1967 – current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC, and Jeep vehicles).

36. Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Bearing Removal Tool Set, 16 Pieces -Automotive

By Orion Motor Tech

  • WIDE APPLICATION: This internal bearing puller set’s expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts
  • HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from 45# steel forged and galvanized for long-term durability under even punishing use; the collets in particular are chrome moly steel to handle even the most stubborn blind bearings and bushings without trouble
  • 16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm)
  • EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer’s weight back to easily knock out the bearing or bushing; for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part
  • BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed

37. Tiger Tool 15000 Leaf Spring Bushing Service KIT NO ADAPTERS -Patio, Lawn & Garden

By Tiger Tool

  • 15000 Tiger Tool Leaf Spring Pin & Bushing Service Starter Kit (No Adapters)

38. Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4×4 Adapters, for Most 2WD and 4WD Cars and Light Trucks (BL) -Wheel Bearing Tools

By Orion Motor Tech

  • PROFESSIONAL-GRADE DURABILITY: Constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.
  • ALL-IN-ONE TOOL KIT: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
  • PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization
  • EASY OPERATION: Use the ORION MOTOR TECH Ball Joint Press Tool Set with 4WD Adapter to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm.
  • UNIVERSAL COMPATIBILITY: Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints
  • If you are not satisfied with this product or if you have any questions, please feel free to let us know.
  • Includes a 4WD adapter for service on 1967 – current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC, and Jeep vehicles).

39. Lisle 29090 Truck Anchor Pin Bushing Kit -Automotive

By Lisle

  • Item Package Weight:0.68 Kilograms
  • Item Package Length:1.016 Centimeters
  • Item Package Height:40.64 Centimeters
  • Item Package Width:35.56 Centimeters

40. Camoo Bushing Removal Tool, Bushing Driver Set, 52 Piece Seal Drive Set -Automotive

By Camoo

  • Packed in a case for easy storage and transportation
  • COMPLETE KIT — The discs sizes range from 18mm (0.7 inches) to 65mm (2.51 inches) in 1mm increments, and 74mm (2.91 inches)
  • All discs are connected with a 12mm (0.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle for easier work.
  • GREAT COMPABILITY — All 52 pieces are interchangeable with each other so you get many different size variations in one set so you will do the job quickly.
  • SATISFACTION GUARANTEE — 12 months warranty
  • All discs are fully interchangeable with the seal driver kit.
  • DURABLE & ORGANIZED — Top steel with extreme anti-wear property
  • No worry about buying! Feel free to contact us if any question.
  • EASY TO USE — Just select the required sizes, and assemble your custom driver, select the components or sizes, assemble the drive tool, strike the tool and do the job
  • Economical and practical, don’t miss it!

Related Posts :

41. Strong Ball Joint,U-Joints and Brake Anchor Pins Press and Removal Tools丨Universal Installation Kit for Pre-pressed Upper or Lower Control Arms -Automotive

By dynofit

  • This Dynofit U joint and brake anchor pins for Most 2WD and 4WD Cars and Light Trucks, Heat Treated C Clamp Puller is made of high quality material which can excellent press rusted parts effortlessly and it’s not easy to bent.
  • Well Made: better finish, more smooth screw, flat machined to keep sitting flush against the ball or u-joint, air damping new design thread for little accurate adjustment!
  • Brand Promise: 1 year warranty, free return replacement or refund if missing parts, thread problems or anything else
  • Package:10pcs as pic shown in box, 7/8″ (22mm)socket recommended, and the exquisite plastic is through heat treated which make the surface more beautiful, you are not only got a set of tool, you also got a nice gift.
  • This Ball Joint Press Kits has a wide range of applications, it can not only be used to remove ball joints, but also U-joints and brake anchor pins, the operation is easy which won’t take a long time.

42. Orion Motor Tech FWD Front Wheel Drive Bearing Adapters Puller Separator Splitter Press Replacement Installer Removal Tool Kit -Brake Tools

By Orion Motor Tech

  • ELIMINATE AFTER SERVICE ALIGNMENT : There’s no need to take in your vehicle for alignment after installation
  • Our kit provides all the tools necessary to work with your car or trucks steering knuckle and strut assembly while remaining on your vehicle.
  • ANTI-RUST PREMIUM GRADE MATERIALS : Constructed from heavy-duty forged steel with a black-oxide finish on the adapters for maximum strength and longevity that resists rust and corrosion.
  • EXCELLENT CUSTOMER SERVICE : We pursue outstanding customer service with professional technical support
  • If you are not satisfied with this product or if you have any questions, please don’t hesitate to contact us.
  • 23 PC COMPREHENSIVE KIT : Everything you need for a simple removal and installation of wheel bearings on front wheel drive vehicles
  • With 12 bushing adapters, 4 sleeves with sleeve plates, a wheel hub installer and more — you’ll be finishing jobs faster and easier like never before.
  • UNIVERSAL COMPATIBILITY : Designed for front wheel drive cars and small trucks; comes with a premium well-organized ABS box for easy storage and transport.

43. Powerbuilt 23 Piece Ball Joint and U Joint Service Set – 648617 -Brake Tools

By Powerbuilt

  • Harm Bal/ crank PULLEY P
  • Kit services: most Domestic and import rear wheel drive vehicles
  • Tool solutions for most all situations
  • Designed to help you remove and install press-fit type ball joints without taking the control arm off the vehicle
  • Remove and install pressed-in Ball Joints found on most vehicles
  • Kit includes step-by-step usage instructions
  • Tools can also be used to remove and install U Joints
  • Built to exceed tool standards
  • Allows changing the ball joint without removing the Control Arm from the vehicle
  • Remove and install special threaded upper Ball Joints found on many Chrysler vehicles

44. Injector Sleeve Remover and Installer Tool Compatible For Volvo Truck FM and Compatible For Mack Truck MP7, MP8 Engine -Tools & Home Improvement

By Kommen Tools

  • The kit utilizes an expanding collet design to grip the sleeve from above and attaches to the puller force screw.
  • Specially design kit that allows the copper unit injector sleeves to be extracted from the top of the cylinder head.
  • Fitting tool expander supplied for copper type sleeves & steel type.
  • Equivalent to OEM tools for removal of both steel and copper sleeves
  • OEM reference number: 9986174, 88800387, 9998254

45. OTC 27795 3-1/16″ – 4-1/2″ Driver Tool -Brake Tools

By OTC

  • Big-job driver set for servicing large components
  • Now you can have the proper-size driver for nearly any automotive seal bearing or bushing installation job
  • Includes a handle and 24 discs ranging from 3-1/16 inch to 4-1/2 inch diameter

46. Rear Suspension Trailing Arm New Bushing Removal Tool Kit Fit for Ford Focus Mazda Volvo -Automotive

By bimiti

  • The greater the hardness, the higher the strength, but the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life.
  • ApplicationThis disassembly tool has a wide range of application and strong practicality
  • After-sales ServiceThis product has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we will solve any difficulties for you in time.
  • MaterialThis disassembly tool is made of selected carbon steel
  • PerformanceThis disassembly tool has excellent performance, protects your car from scratches, no marks or scratches, and is used to silently press in and pull out the rear of the shaft to improve safety and reliability.
  • It is suitable for Ford Focus MK1 & MKII 1998-2007, Ford Cuga 2008, Ford C-Max 2007, Mazda 3 sedan, hatchback 2003-2008, suitable for Mazda 5 CR, CW, MPV 2005, applicable to V50 2004-2012, applicable to S40 MK sedan 2003-2012.
  • Easy to useThis removal tool is easy to use and install without the need to remove the rear axle, saving a lot of time.

47. KUNTEC Differential Rear Ball Joint Remover Axle Bushing Tools Compatible for BMW E81 E87 E90 E91 -Automotive

By KUNTEC

  • This specialist set includes tools for removal and refitting of an range of bushes and bearings to the rear of numerous BMW models.
  • Removal and installation of rear axle differential rubber bearings compatible for: 1-Series:E81 and E87, 3-Series:E36, E46, E83, E90, E91, E92 and E93, 5-Series: E60 and E61, 6-Series: E63 and E64, 7-Series: E38, E65, E66 and E67,8-Series: compatible for E31 Z4: E85 and E86 MINI Cooper S: R53
  • Removal and installation of ball joints on the rear wheel compatible for : 5-Series: E39, E60, E61 and E70(X5), 6-Series: E63 and E64, 7-Series: E38, E65, E66 and E67, 8-Series: E31
  • Removal and installation of rear axle differential rubber bearings on lower axle compatible for: 3-Series:E36, E46 and E83, 8-Series: E31 Z4: E85 and E86
  • Removal and installation of ball joints and rubber bearings on the longitudinal arms compatible for: 3-Series:E36, E46 and E83 5-Series: E39, E60, E61 and E70(X5), 6-Series: E63 and E64, 7-Series: E38, E65, E66 and E67 8-Series: E31 Z4: E85 and E86

48. 21 PC BALL JOINT SERVICE SET -Brake Tools

By OEMTOOLS

  • 21 PC BALL JOINT SERVICE SET

49. Juscycling MTB Rear Shock Bearing Bushing Replacement Installation and Removal Tool Kit for for Rockshox Fox -Sports & Outdoors

By Juscycling

  • Built with stainless steel and aluminum alloy: non-rusting and durable
  • With observation window and scale to facilitate precise installation and removal
  • Fit both DU and needle bearing bushing
  • Built-in integral bearing to provide even force transmission
  • Note: Please apply grease on bolt thread before using

Best Brands

Buying a product from a reputable manufacturer that provides high brand value is one of the most essential things. Based on my research, here are the top brands that make the best bushing removal tool.

  • WINTOOLS
  • Orion Motor Tech
  • SCITOO
  • OTC
  • Shankly
  • Tiger Tool
  • Estink-
  • 8MILELAKE
  • CTA Tools
  • DHA

The Buyer’s Guide

Although the aim of this list is to help you choose the best option for your needs. This guide shall help you make an informed purchase decision. Here are the few things to consider when choosing a bushing removal tool.

1. Features

There’s no point in purchasing a bushing removal tool that doesn’t solve your usage needs. Sometimes, even the best option wouldn’t have all the options you’d need. That’s why list down all your feature requirements and make sure that the option you’ve chosen comes with all of them.

2. Budget

Budget plays an important role, if it wasn’t for the budget, wouldn’t everyone purchase the most expensive option? However, before you decide the budget, I’d recommend you to make a list of features you’d need. In case a feature you need the most isn’t available in your budget range, then there’s no point in buying it, is there?

My advice is to make sure that the product has all the features you need then decide the budget. If a product you’ve chosen isn’t having all the features you need, then you should consider increasing your budget.

3. Value For Money

There are times when you shall come across various bushing removal tool that shall have all the features you need. However, the price difference shall exist. In a situation like this, it is recommended to value each feature and make sure that you’re not overpaying for a feature you wouldn’t use.

4. Brand, Customer Support, & Warranty

Purchasing a product from a reputed brand is very important. Not only does it guarantee high-quality build, but you also get much better customer support.

You should also make sure that it has a decent warranty, it is really helpful in case a product breaks down due to manufacturing defects. Also, repairs during warranty are generally free of cost (depends on service terms).

5. Individual Product Reviews

You don’t have to watch individual reviews of each bushing removal tool in this list. However, pick 2-3 options that have all the technical aspects according to your usage needs. Once you’re ready with it, go to YouTube/Amazon and look at video/customer reviews to make sure that the existing buyers are satisfied with the product.

The FAQs

Which is the best bushing removal tool?

According to my research, the Tiger Tool 15000 Leaf Spring Bushing Service KIT NO ADAPTERS is the best option.

Is Tiger Tool a reliable brand?

It’s one of the best brands, not only does it make the top-rated bushing removal tool, but it also is known for its exceptional service.

Which is the cheapest yet powerful bushing removal tool?

According to me, the OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing is one of the cheapest options available and yet has all the features.

Are there deals going on?

A few of the options in our article are currently available for a discounted price. However, check out the product listing to find more information.

What brands should I consider when purchasing?

Based on my research, these are the top 5 brands: Tiger Tool, OTC, OTC, OTC, and OTC.

Should I buy it online or go to an offline store?

Shopping online comes with a few advantages such as discounted pricing, quick delivery at home. However, if you’re in a hurry or can find the product for a cheaper price in the offline market, consider visiting the offline store.

The Verdict

Choosing the right product isn’t easy and for many of them it could be a time consuming task. However, with this guide, my aim is to help you guys find the perfect bushing removal tool for your needs.

I’ve done a huge research to ensure that options I’ve listed are among the best. Like mentioned above, I also interviewed many experts to make sure that the enlisted models are high quality.

I hope that you’re able to find the right bushing removal tool for your usage. If you are still struggling to find one, feel free to comment below or contact me.