45 Best best ssd docking stations in 2023: According to Experts.

USB C Docking Station,18 in 1 Quadruple Display Docking Station with 4K HDMI+SSD Enclosure+VGA Display+Ethernet+4 USB,+SD for MacBook Pro Air, Dell XPS 13, HP x360 and More Type-C Laptops

9.8

Selore&S-Global

9.7

Sabrent USB 3.0 4 Bay 2.5” Hard Drive/SSD Docking Station with Fan (DS-4SSD)

Sabrent 4-Bay USB 3.0 SATA 2.5″/3.5″ SSD/HDD Docking Station (DS-U3B4)

9.7

Sabrent USB 3.0 to SATA External Hard Drive Lay-Flat Docking Station for 2.5 or 3.5in HDD, SSD [Support UASP] (EC-DFLT)

9.5

ORICO SATA to USB 3.0 External Hard Drive Lay-Flat Docking Station for 2.5″ or 3.5″ HDD/SSD – Supports up to 8TB Drive

9.5

ORICO

8.9

Sabrent USB 3.0 SATA/SSD 2.5″ HDD Docking Station with 3 USB Ports (DS-U301)

FIDECO USB 3.0 to SATA Hard Drive Docking Station Dual-Bay External HDD Dock with Offline Clone/Duplicator Function and TF & SD Card Slots for 2.5/3.5 Inch SATA HDD SSD, Support 16 TB

8.6

FIDECO

8.6

Docking Station, 18in1 USB C Docking Dtation for Windows/MacBook Pro/Air/Thunderbolt 3 Dock with SSD Enclosure 3 HDMI DP100W PD3.0 RJ45 SD/TF Card Reader Audio&Mic 5 USB Ports.

MOKiN

8.6

Inateck RGB SATA to USB 3.0 Hard Drive Docking Station with Offline Clone, for 2.5 and 3.5 Inch HDDs and SSDs, UASP Supported, Black SA02003

Inateck

8.4

To make this list an unbiased resource for choosing the best best ssd docking stations, I contacted 39 experts and discussed various aspects to consider. After a huge discussion, I went across customer reviews, researched the reputed brands, and a lot of other things. Because my aim is to recommend products that are highly value for your money.

1. Sabrent USB 3.0 to SATA I/II/III Dual Bay External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD with Hard Drive Duplicator/Cloner Function [10TB Support] (EC-HD2B) -Hard Drive Enclosures

By SABRENT

Supports Offline Cloning up to 60Mbps.
Supports Transfer Speeds up to 5Gbps (USB 3.0),480Mbps (USB 2.0), 12Mbps (USB 1.1)
Supports Standard Desktop 2.5″/3.5″ SATA Hard Drives or SSD
Plug and play, no drivers needed.
Supports hard drives up to 10TB.

2. USB C Docking Station,18 in 1 Quadruple Display Docking Station with 4K HDMI+SSD Enclosure+VGA Display+Ethernet+4 USB,+SD for MacBook Pro Air, Dell XPS 13, HP x360 and More Type-C Laptops -Electronics

By Selore&S-Global

Docking Station for Optimize Your Desktop：18 in 1 docking station tailored specifically for designers, engineers, and data analysts who need more workspaces, you can easily expand laptop to 1 SSD enclosure,3 4KHDMI, 1 VGA,5 USB-A, 1 USB-C, SD/TF Card Slot,1 RJ45, 1 Audio port.SSD Enclosure on the top,you can easily connect a M.2 SATA 3.0 NGFF SSD (up to 2TB capacity) to a PC,Laptop,Router etc for data transfer and expanding storage
USB C Docking Station No Limits：The laptop docking station break through typical limitations,Compared to the heavy docking station and other USB C hubs, 18 in 1 usb c hub can run four external displays while equipped with an M.2 SSD enclosure which makes it a great companion to your notebook to simplify your work-from-home setup.It also supports the newest Macbook pro with Thunderbolt/USB 4.A convinience accessories for your new usb c laptops.
Compatible With：This Dual Monitor Adapter compatible with thunderbolt 3 devices, such as Dell XPS 13/15, HP Spectre x360/ZBook; Lenovo ThinkPad X1 Carbon/ X1 Extreme; MSI GS65 /GS75; MacBook etc,Plug And Play
Plug-play and easy operation.
4K Quadruple Display：This USB C docking station supports up to triple display on Mac No-mirror mode and quadruple display on Windows Extend mode.HDMI1&HDMI2&DP resolution up to 4K@60Hz, HDMI3 up to 4K@30Hz. (Note: On Mac devices, when the dual male is connected to the computer, HDMI 1 output can be combined with VGA (HDMI 2 or HDMI 3) to form two external external display MST; If more displays are connected at the same time, HDMI 2 or HDMI 3 and VGA can only be displayed by SST.)
USB 3.0 port: Up to 5Gb/s data speed & maximum power output 5V/0.9A, backwards compatible with USB2.0/USB1.1.(Note:HOST1 system only drives HDMI1 display,other ports expect HDMI are from HOST2 system.For some Windows laptops only equipped with one USB C port, we suggest you connect to HOST2 to get peripheral devices working via USB C cord.)
(Attention: Video function need to confirm that your host device supports video output or DP Alt Mode)
Power Delivery& Data Transfer:USB-C Power Delivery support 100W,Charging limited to 87-96W for safety

3. Sabrent USB 3.0 4 Bay 2.5” Hard Drive/SSD Docking Station with Fan (DS-4SSD) -Hard Drive Enclosures

By SABRENT

LED indicator for power and HDD access
Transfer speeds up to 5Gbps
Tool-free installation
Read and write four hard drives simultaneously.

4. Sabrent 4-Bay USB 3.0 SATA 2.5″/3.5″ SSD/HDD Docking Station (DS-U3B4) -Hard Drive Enclosures

By SABRENT

Tool-free installation, plug and play.
LED indicators.
Transfer speeds up to 5Gbps.
Supports four SSD/HDD drives, 2.5”or 3.5,” at one time.
Backwards compatible with USB 2.0/1.1

5. Sabrent USB 3.0 to SATA External Hard Drive Lay-Flat Docking Station for 2.5 or 3.5in HDD, SSD [Support UASP] (EC-DFLT) -Hard Drive Enclosures

By SABRENT

Connects via SuperSpeed USB 3.0 (up to 10x as fast as USB 2.0)
UASP requires UASP capable host system
Serial ATA bus up to 6Gbps Signal bandwidth for fast storage backups
Supports all 2.5 and 3.5-inch SATA drives
UASP (USB Attached SCSI Protocol) support for even faster performance
This Docking station comes with a free download of Acronis True Image for Sabrent software for easy cloning

6. ORICO SATA to USB 3.0 External Hard Drive Lay-Flat Docking Station for 2.5″ or 3.5″ HDD/SSD – Supports up to 8TB Drive -Hard Drive Enclosures

By ORICO

What you get: Our worry-free 18-month and 24h friendly customer service.
WHATS IN THE BOX: Double-foil-shielded premium 12V AC adapter and and 3.3 ft USB 3.0 cable
COMPATIBILITY: For 2.5″ and 3.5″ SATA I, II, III Hard Drives and Solid State Drives, USB 3.0 to SATA interface.
EASY INSTALLATION: Tool-Free design allows you to simply mount your hard drive and plug and play with the included USB 3.0 cable, no drivers needed, compatible with Windows, Mac, and Linux.
HIGH SPEED: Super Speed USB 3.0 provides data transfer rates of up to 5Gbps, and backwards compatible with USB 2.0 and 1.1.

7. Sabrent USB 3.0 SATA/SSD 2.5″ HDD Docking Station with 3 USB Ports (DS-U301) -Hard Drive Enclosures

By SABRENT

3-USB 3.0 Ports.
HDD access LED indicator.
Transfer Speeds up to 5Gbps.
Tool-free Installation.
Supports 2.5” & 3.5” SATA HDD.
Plug & Play, Hot Swappable

8. FIDECO USB 3.0 to SATA Hard Drive Docking Station Dual-Bay External HDD Dock with Offline Clone/Duplicator Function and TF & SD Card Slots for 2.5/3.5 Inch SATA HDD SSD, Support 16 TB -Hard Drive Enclosures

By FIDECO

We support 18 months replacement service and 24h friendly customer service.
Offline Clone Function: FIDECO hard drive docking could be used to clone existing hard drive without connecting to a computer, or simply as external storage to transfer data between a hard drive and your computer
Dual Bay Docking Station offers an easy access with 2.5/3.5 inches HDD SSD SATA I/II/III drives, support up to 16TB hard drive, perfect solution for backup & processing IT data, batch processing data, clone data, formatting and file transfers etc.
USB 3.0 Superspeed: Super speed USB 3.0 data file transfers (up to 5 Gbps) from your computer to back-up files and centralize storage for convenient access; USB 3.0 provides faster transfers up to 70% faster read speeds and 40% faster write speeds, backwards compatible with USB2.0 and 1.1
Note: The target disk must be larger/equal than the source disk.
Compatible and 18 Months Warranty: Compatible with Windows XP / Vista / Windows 7 / Windows 8 / Windows 8.1 / Windows 10 and Mac IOS 10.4 to 10.11/Linux
No reboot and additional driver needed, hot-swapping, easy and quick install.
SD & TF Read Slot: Equipped with USB 3.0 SD & TF read slot, supports maximum 2TB SDHC/SDXC, it easy and convenience transferring high-resolution images and video recordings.Highly efficient (DC 12V, 2A), stable and reliable DC power source guarantees a steady supply of energy.

9. Docking Station, 18in1 USB C Docking Dtation for Windows/MacBook Pro/Air/Thunderbolt 3 Dock with SSD Enclosure 3 HDMI DP100W PD3.0 RJ45 SD/TF Card Reader Audio&Mic 5 USB Ports. -Electronics

By MOKiN

Via the SSD enclosure on the top, you could simply to upgrade your computers with more storage(up to 2TB), obviously you budget pick
3* USB 3.0 and 1* USB-C(5Gbps, transfer large files in seconds) & 2* USB 2.0 Port design for your wireless device without signal interference, What’s more, it also built-in SD/TF slots for photographers easy access to files from SD and TF Card.
Unparalleled Charging & Data Transfer: The POWER port in your laptop docking station provides up to 100W to fast charge your laptop, significantly shortened charging times, no need to worry about the power shortage anymore
Like: Dell XPS 13/15, Lenovo ThinkPad X1,Dell Latitude/Precision,HP EliteBook 745 G5,Surface Pro 7,Surface Book 2, MSI GS65 /GS75,2019 MacBook pro (16-inch), 2018/2019 MacBook Pro (15-inch), 2017/2018 MacBook Pro (13-inch).Note DP 1.4 supports 4K@60Hz and DP 1.2 supports 4K@30H.
Wide Compatibility for MacOS and Windows: No drives needed, creating more value for work.18 IN 1 docking station is compatible with the latest laptops and smart devices with Type C port which support DP Alt Mode
USB C Docking Station No Limits: The laptop docking station break through limitations, it equipped with an M.2 SSD enclosure which simplify your work-from-home setup, supporting triple display for MacOS and quadruple display for Windows on extend mode
On extend mode, USB C docking station supports up to triple display for MacOS and quadruple display for Windows by the 3*HDMI ports and the DP port
Ultra HD 4K Quadruple Display: MOKiN Docking Station Allow you access four 4k displays via HDMI and DP ports(HDMI1&HDMI2&DP resolution up to 4K@60Hz, HDMI3 up to 4K@30Hz), enjoying more crystal-clear streaming
Note: NOT support M key and SSD NOT INCLUDE, and please keep the logo face up.
Whether you are working, studying, or entertaining, the unique triple and quadruple display lets you get more unexpected details
18-In-1 Docking Station: Universal 18 in 1 docking station tailored specifically for designers, engineers, and data analysts who need more workspaces, you can easily expand laptop to 1 SSD enclosure,3 4KHDMI, 1 VGA,5 USB-A, 1 USB-C, SD/TF Card Slot,1 RJ45, 1 Audio port
Compared to the heavy docking station and other USB C hubs, 18 in 1 usb c hub is more powerful with multi-ports,low power consumption and quicker heat dissipation and higher data transfer.

10. Inateck RGB SATA to USB 3.0 Hard Drive Docking Station with Offline Clone, for 2.5 and 3.5 Inch HDDs and SSDs, UASP Supported, Black SA02003 -Hard Drive Enclosures

By Inateck

The product is compatible with almost all kinds of 2.5” and 3.5” HDDs and SSDs on the market.
Offline Clone: The docking station can operate offline cloning independent from a computer.
It enters breathing mode when the hard drive is under sleep status or gets removed.
Wide Compatibility: Support up to 2 x 10TB hard drives
Package List: 1 x Inateck SA02003 docking station, 1 x instruction manual, 1 x 12V/3A Power Adapter, 1 x USB 3.0 Data Cable.
RGB Effect Available: The RGB LED flashes quickly when there is a hard drive working in the docking station
Fast Transfer Speed: Besides USB 3.0 super speed, the docking station supports UASP, which provides even faster data transfer.

11. Neeyer USB 3.0 to SATA Dual Bay External Hard Drive Docking Station for 3.5/2.5 HDD, SSD Hard Drive Clone Docking Station with Duplicator/Offline Cloner Function [10TB & UASP Support] -Hard Drive Enclosures

By Neeyer

Neeyer USB 3.0 to SATA Dual Bay External Hard Drive Docking Station for 3.5 2.5 HDD, SSD Hard Drive Clone Docking Station with Duplicator Offline Cloner Function [10TB & UASP Support]

5.Offline Cloning/UASP ! It supports computer free hard drive A to B offline cloning!
1.Dual bay docking station offers an easy access with two 2.5 inch & 3.5 inch HDD SSD SATA I/II/III drives, support 2x 10TB hard drives simultaneously，is a perfect solution for backup & processing IT data, batch processing data, formatting, file transfers, data recovery, etc.
3.SUPPORT MULTIPLE SYSTEMS:The Awolf Multi-function hdd ide docking station support Windows/Lunix/Mac,etc
2.Super speed USB 3.0 data file transfers (up to 5 Gbps) from your computer to back-up files and centralize storage for convenient access; Includes a USB 3.0 cable to connect to your computer; Backwards compatible with USB 2.0/1.1，provides faster transfers up to 70% faster read speeds and 40% faster write speeds
No reboot and additional driver needed, hot-swapping, easy and quick Tool-Free installation
4.Stable and reliable DC power source: The power supply is highly efficient (12V, 3000mA), so that a stable energy supply is ; entering sleep mode without operation in 30 minutes
system, with powerful system storage expansion function, you can use it as entertainment video library for your HD equipment such as smart TV, HD set-top box, etc.

12. SAIENTEE Hard Drive Docking Station, USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External Enclosure with All in 1 Card Reader and USB 2.0 Hub for 2.5″ 3.5″ IDE SATA I/II/III HDD SSD -Hard Drive Enclosures

By SAIENTEE

SAIENTEE Hard Drive Docking Station, USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External Enclosure with All in 1 Card Reader and USB 2.0 Hub for 2.5 3.5 IDE SATA I II III HDD SSD

Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS).
Data transfer: Easy transfer of data from your 2.5 “/ 3.5” IDE or SATA hard disk to your computer via USB 2.0 port, USB 2.0 data transfer rate up to 480MB / s
(Note: Please do not replace the hard drive when the product is working.)
Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later
In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support.
Please select the right model to avoid your order error
WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius
Integrated all-in-1 card reader (XD card / TF card / MS (Duo / Pro) card / CF card / SD card), at the same time card reader can read only one memory card, up to 64GB.
Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 “/ 3.5” IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive

13. RIITOP NVMe to USB Docking Station, External M.2 PCI-e NVMe SSD to USB-C Reader Adapter for M.2 (M Key) NVMe SSD -Hard Drive Enclosures

By RIITOP

NVMe Dock Installation: 1
RIITOP NVMe to USB Docking Station Compatibility: Support most of M.2 PCI-e M key NVMe SSDs, Compatible with Samsung 970 EVO /950Pro/ 960Evo/ XP941/ PM951/ PM961/ SM951/ SM962, WD Black NVMe SSD and so on
No mounting screws need, simply insert the NVMe M.2 device and connect USB-C cable, you can start using it as external SSD immediately.
It can NOT support “Hot-Plugging”
This RIITOP NVMe to USB Adapter is Designed for those who own Multiple NVMe M.2 SSDs that need to be frequently pluging and unpluging
Please do not touch the SSD
Connect USB Cable to Computer
Only Support M.2 PCI-e Based M Key NVMe SSD
Package including: 1x M2 NVMe to USB Docking, 1x USB C to USB C Cable, 1x USB C to A Adapter
Insert NVMe SSD into Slot 2
DO NOT support PCI-e M Key AHCI SSD, SATA based B+M key or B Key SSD, Please check with the picture.
Please don’t exchange the SSDs when connecting 3
The Temperature of the entire Operating SSD may exceed 60 ° C
Please Note: 1

14. Sabrent USB 3.1 to SATA External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD [Includes Both Type C and Type A Cables Supports UASP and 10TB Drives] (DS-UTC1) -Hard Drive Enclosures

By SABRENT

Sabrent USB 3.1 to SATA External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD [Includes Both Type C and Type A Cables Supports UASP and 10TB Drives] (DS-UTC1)

Supports all 2.5 and 3.5-inch SATA drives up to any capacity (10TB+).
UASP requires UASP capable host system.
USB 3.1 high-speed supports up to 10Gbps data rate
UASP (USB Attached SCSI Protocol) support for even faster performance
Tool-free HDD Installation, plug and play, no drivers needed.
Includes both USB Type C and USB Type A cables

15. SSK USB 3.0 to SATA External Hard Drive Docking Station Enclosure Adapter for 2.5 & 3.5 Inch HDD SSD SATA, Super Speed up to 5Gbps, Support UASP no Drivers Needed(16TB Supports) -Hard Drive Enclosures

By SSK

SSK USB 3.0 to SATA External Hard Drive Docking Station Enclosure Adapter for 2.5 & 3.5 Inch HDD SSD SATA, Super Speed up to 5Gbps, Support UASP no Drivers Needed(16TB Supports)

Package Includes: 1x SSK DK100 Docking; 1x USB 3.0 Cable; 1x 12V/2A Power Adapter; 1x Manual
Compatible with all 2.5 inch and 3.5 inch SATA I/II/III HDD SSD; Up to 5Gbps Data Transfer Rate in USB 3.0 external hard drive dock, supports UASP and Transfer data quickly and easily through USB 3.0 at speeds up to 5Gbps
Compatible with Windows XP / Vista / Windows 7 / Windows 8 / Windows 8.1 / Windows 10 and Mac IOS 10.4 to 10.11 Linux Kernel 2.4.2 or higher versions.
Enables you to access desktop or laptop hard drives without the frustration of assembling hard drive enclosures, By inserting a 2.5″/3.5″ SATA hard drive directly into this docking station, you can quickly access drive contents and transfer files
Smart Auto-sleep to protect your hard drive after 10 minutes no operation.
plus you can swap out hard drives effortlessly With plug and play mounting.
Solid, shockproof & vibration-resistant plastic case, this external SATA HDD/SSD boasts efficient Heat sink to stay cool with low power consumption for reliable data transfers
Plug and play, LED indicator status display.

16. KETAKY USB 3.1 Gen2 10Gbps Dual-Bay NVME Docking Station,Lay-Flat External Hard Drive Docking Station for M2 SSD Key M, Support Offline Clone Function and Auto Sleep Function (Tool-Free Installation) -Hard Drive Enclosures

By KETAKY

KETAKY USB 3.1 Gen2 10Gbps Dual-Bay NVME Docking Station,Lay-Flat External Hard Drive Docking Station for M2 SSD Key M, Support Offline Clone Function and Auto Sleep Function (Tool-Free Installation)

Maximize the use of your SSD hard drive again, perfectly protecting what you love and cherish.
Transfer 10GB files in seconds, saving up the loading time to do more
Backwards compatible with USB3.1GEN1/USB 2.0/USB 1.1 ports.Note1:hard disk not included.Note 2：Offline copy cannot be connected to the computer
(Need to connect the included charger)Supports 2 M.2 (NVME) hard disk reads and writes at the same time.It protects the hard disk from outside scratches and makes M.2 hard drive portable for data storage
USB-C Gen 2 or Thunderbolt 3 host recommended for fastest performance
Portable External Storage :USB3.1 GEN 2 hard drive enclosure can easily connect your M.2(NVME) to a PC, laptop for data transfer
USB-C Gen 1 and USB 3.0 systems supported at up to 5Gbps
Support Offline One-Click Copy:Offline copy, no need to connect to a computer, file data, audio and video data, one-click offline copy, easy operation.Note: Copying does not intelligently identify the data on the hard disk
With the detachable USB-A to USB-C cable and USB-C to USB-C cable, it is quite flexible to connect and take along.18-Month Worry-free Warranty.
Offline Clone cannot be connected to the computer.USB3.1 GEN 2（10Gbps):The maximum data transfer speed of the USB 3.1 interface is 10Gbps
Easy Installation&Friendly Design :Plug-and-play compatibility with Windows, Mac, and Linux
As with all SSDs, new media must be formatted before use.The LED indicator lets you know the working status easily
Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.
Copying is a full-to-one cloning method, so please back up the data on the target disk before copying to avoid loss of important data!
COMPATIBILITY: Compatible with M.2 NVMe SSDs.(2230 2242 2260 2280 these four specifications of the hard disk) .Performance depends on host system, workload, and NVMe media used

17. Sabrent USB 3.0 to SATA Dual Bay External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD with Hard Drive Duplicator/Cloner Function [10TB Support] (EC-DSK2) -Hard Drive Enclosures

By SABRENT

Sabrent USB 3.0 to SATA Dual Bay External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD with Hard Drive Duplicator Cloner Function [10TB Support] (EC-DSK2)

Supports hard drives up to 10TB.
Supports Transfer Speeds up to 5Gbps (USB 3.0),480Mbps (USB 2.0), 12Mbps (USB 1.1)
Plug and play, no drivers needed.
Reverse compatible with USB 1.1 & USB 2.0.
Supports Standard Desktop 2.5″/3.5″ SATA Hard Drives or SSD

18. FIDECO USB 3.0 to SATA Dual Bay External Hard Drive Docking Station for 2.5/3.5 Inch HDD SSD with Hard Drive Duplicator/Offline Clone Function/2 USB 3.0 Ports/1 USB Fast Charge Port, Support 16TB -Hard Drive Enclosures

By FIDECO

FIDECO USB 3.0 to SATA Dual Bay External Hard Drive Docking Station for 2.5 3.5 Inch HDD SSD with Hard Drive Duplicator Offline Clone Function 2 USB 3.0 Ports 1 USB Fast Charge Port, Support 16TB

Please note the target disk must be larger than the source disk.
FIDECO Dual bay 4 in 1 hdd docking station offers an easy access with two 2.5/3.5 inches HDD SSD SATA I/II drives, which is a perfect solution for backup & processing IT data, batch processing data, formatting, Offline Cloning and file transfers etc
Plug and Play:No software, drivers or complicated installation required.Ultra-light aluminum-alloy body offers excellent heat dissipation
FIDECO hdd dock own 2 USB 3.0 ports and 1 USB 3.0 fast charge port, ensuring quick syncing and file sharing,make a superior data-storing versatility
18 Months Warranty: FIDECO hard drive dock is compatible with Windows XP / Vista / Windows 7 / Windows 8 / Windows 8.1 / Windows 10/ Linux and Mac IOS 10.4 to 10.11
USB 3.0 Transfer Speeds Up to 5Gbps, backwards compatible with USB2.0 and 1.1
Support Offline Cloning: The hdd docking bay can be used to clone an existing hard drive without connecting to a computer, or simply as external storage to transfer data between a hard drive and your computer
We offer 18 months 100% refund or replacement and 24h friendly customer service, please rest assured to order.
Support 16TB: Please note the target disk must be larger than the source disk
Built-in power control switch, highly efficient (DC 12V, 2A), stable and reliable power source guarantees a steady supply of energy

19. Inateck SATA Hard Drive Docking Station, USB 3.0 SSD Docking Station,Dual Bay,FD2005 -Hard Drive Enclosures

By Inateck

Package contect: docking station, 12/3a power adapter, USB 3.0 cable, user Manual
Universal compatibility: Compatible with Windows XP/ 7/8/10, Linux, Mac OS 9.1/10.8.4 and above.
Support offline Clone, plug and play, no drives needed.
Supports up to 10TB hard drives.Date transfer speeds up to 5Gbps.
External hard drive docking station: supports standard desktop 2.5 and 3.5 inch SATA hard drives or SSD

20. Cable Matters USB 3.0 Hard Drive Docking Station (USB to SATA Docking Station) with 10TB+ Drive Support for 2.5 Inch & 3.5 Inch HDD SSD – USB-C Cable Included for Thunderbolt 3 & USB-C Computer -Hard Drive Enclosures

By Cable Matters

Cable Matters USB 3.0 Hard Drive Docking Station (USB to SATA Docking Station) with 10TB+ Drive Support for 2.5 Inch & 3.5 Inch HDD SSD - USB-C Cable Included for Thunderbolt 3 & USB-C Computer

Windows & Mac compatible SSD dock supports Windows XP/Vista/7/8/8.1/10 and MacOS 10.4 and up and some Linux kernels; Dell companion storage for the Dell XPS 12 9250, 13 9350 / 9360 / 9365, 15 9550 / 9560, Latitude 5480 / 5580 / 7275 / 7280 / 7370 / 7480 / 7520 / 7720 / E5570, Precision 3520 / 15 3510 / 5510 / M7510, 17 M7710, Alienware 13 / 15 / 17
USB C to SATA dock is Thunderbolt 3 port compatible with the included USB C cable; Back-up your data from the 2016/2017/2018 MacBook, MacBook Pro, iMac and iMac Pro or Windows computers such as Dell XPS 12 9250, 13 9350 / 9360 / 9365, 15 9550 / 9560, Latitude 5480 / 5580 / 7275 / 7280 / 7370 / 7480 / 7520 / 7720 / E5570, Precision 3520 / 15 3510 / 5510 / M7510, 17 M7710, Alienware 13 / 15 / 17
Tool free hard drive dock supports 2.5″ and 3.5″ SSD, HDD and SSHD SATA I/II/III drives of any capacity; The HDD docking station is AC powered for stable drive performance
External hard drive dock is SATA compatible with SSD drives such as the Samsung EVO 500GB / 1TB, Kingston A400SSD 240GB, and Crucial MX500 500GB; The external hard drive docking station supports HDD drives such as the WD Red 4TB NAS Hard Disk Drive, WD Blue 1TB PC hard drive, Seagate BarraCuda Internal hard drive 2TB
SuperSpeed USB 3.0 file transfer rate (up to 5 Gbps) to back-up files and centralize storage for convenient access is included with this external hard drive bay; Add an Xbox external hard drive for expanded game storage; Both USB-A 3.0 to B and USB-C to B cables are included

Related Posts :

21. Unitek Aluminum USB 3.0 to SATA Dual Bay External Hard Drive Docking Station with UASP for 2.5 / 3.5-inch HDD SSD, Hard Drive Duplicator/Offline Clone Function (2 x 16TB Support)-Silver -Hard Drive Enclosures

By Unitek

Unitek Aluminum USB 3.0 to SATA Dual Bay External Hard Drive Docking Station with UASP for 2.5 3.5-inch HDD SSD, Hard Drive Duplicator Offline Clone Function (2 x 16TB Support)-Silver

The Unitek USB docking station supports all 2.5”/ 3.5” SATA I/ SATA II / SATA III HDD SSD (up to 2 x 16TB); Plug and play, no driver needed, hot-swapping, easy and quick, aluminum case makes it durable and resistant soiling.
Compatible with windows XP / Vista / 7 / 8 / 8.1 / 10 (32 / 64 bit), Mac OS 10.10 or higher, Linux, Standalone duplicating / Offline Clone operation with LED indicator offers 1:1 copies of hard disks at a rate of up to 485 MB/s.
Supports UASP and SATA 6Gbps, provides faster transfers up to 70% faster read speeds and 40% faster write speeds over traditional USB 3.0.
Hard drive offline clone duplicator function, the Unitek hard drive docking can be used to clone an existing hard drive without connecting to a computer, easy to duplicate data and file from one to another hard drive.
What we offer: 1 x USB 3.0 to SATA Aluminum Hard Drive Dock; 1 x 3.9ft Data Cable; 1 x 12V 3A Power Adaptor(UL listed); 1 x User Manual.
Super speed USB 3.0 interfaces with data transfer rates up to 5Gbps, backward compatible with USB2.0 and 1.1; automatic sleep mode after 30 minutes of inactivity saves energy

22. StarTech.com USB 3.0 Dual Hard Drive Docking Station with UASP for 2.5 / 3.5in HDD / SSD – USB 3.5″ SATA HDD / SSD Dock – SATA 6 Gbps -Hard Drive Enclosures

By StarTech

EASY TO USE: This hard drive dock features independent power buttons for each individual drive, ensuring you can operate each hard drive separately
specialists who need quick access to drives for imaging
Also perfect for technicians who test or benchmark multiple hard drives.
VERSATILE FUNCTIONALITY: This dual hard drive docking station is perfect for system builders and I.T
Compatible with USB 3.0-enabled computer systems such as Dell Optiplex & Apple Mac & MacBook
Replacement for SATDOCK22U3S SATDOCK2U3GB
INCREASED PERFORMANCE: Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid drives.
BROAD COMPATIBILITY: This USB 3.0 docking station supports all of the leading operating systems, including: Microsoft Windows (8/7/Vista/XP/Server 2008/Server 2003), Apple OSX (10.9/10.8/10.7/10.6), Linux, and Google Chrome OS.
USB 3.0 Docking Station / 2.5 3.5 HDD Dock / Dual SATA Dock / 3.5in Hard Drive Dock / 2.5in Hard Drive Dock / USB 3.0 Hard Drive Dock with SATA 6 Gbps
Quickly access drives for imaging or external data backup
This gives you the freedom to hot-swap one drive while transferring data to another, saving you time.
Transfer data from one drive to another
Dock two 2.5″ or 3.5″ SATA III SSDs/HDDs over USB 3.0 with UASP

23. WEme USB 3.0 to SATA Dual-Bay External Hard Drive Docking Station with Offline Clone/Duplicator Function for 2.5 & 3.5 Inch HDD SSD SATA (SATA I/II/III) Support 2X 8TB & UASP, Tool-Free -Hard Drive Enclosures

By WEme

WEme USB 3.0 to SATA Dual-Bay External Hard Drive Docking Station with Offline Clone Duplicator Function for 2.5 & 3.5 Inch HDD SSD SATA (SATA I II III) Support 2X 8TB & UASP, Tool-Free

Integrated safeguards preventing overvoltage, leak currents, short circuits and peak voltage, interference and disturbance, safer data transfer and access
Support 2x 8TB hard drive; Support offline Clone, no drivers needed, easy installation; cloning can only be done from a drive to B drive, make sure the memory capacity of B drive is larger than a drive; not support online Clone
Usb 3
5 inch and 3
0 external, SATA-III internal, especially made for 2
0 cable; 1x 12V/3a power adapter; 1x manual
Package includes: 1 x USB3
0 SuperSpeed & supports UASP, even faster data transfer
Stable and reliable DC power source: The power supply is highly efficient (12V, 3000mA), so that a stable energy supply is ; entering sleep mode without operation in 30 minutes
0 to SATA Dual bay docking station; 1x USB 3
5 inch SATA HDD/SSD, USB 3

24. ineo USB3.1 Gen1 to SATA 2.5 inch SSD/HDD Docking Station (2.5 inch 1 Bay Docking) [T2576-I] -Hard Drive Enclosures

By ineo

Perfectly compatible with various hard drives from Seagate/WD/HGST/etc, and SSD from Intel/Samsung/SanDisk/Micron/etc.
Easy installation for 2.5″ SATA hard drive or SSD with UASP supported docking station
Compatible with multiple OS – WINDOWS XP, 7, 8, 8.1 ,10 or above, MAC OS X 10.6 or above
UASP protocol provides an added boost to read and write speed ratings while using an SSD
Compatible with PS4 & XBOX ONE (both must be updated with the required firmware)

25. ACASIS typec USB 10G to NVME Dual-Bay NVME Docking Station for M2 SSD M Key, Supports Hard Drives up to 8TB with Offline Clone Duplicator and Auto Sleep Function -Hard Drive Enclosures

By FREEGENE

ACASIS typec USB 10G to NVME Dual-Bay NVME Docking Station for M2 SSD M Key, Supports Hard Drives up to 8TB with Offline Clone Duplicator and Auto Sleep Function

It may help you clone easily and protect the nvme enclosure and SSD.
Pushing USB3.1 Gen2 to its limit, R/W speed up to 992MB/s with most NVMe.
Supports hard drives up to 8TB
If use the equal capacity SSD, please make sure there is showing the same capacity on the computer or it won’t be clone sucessfully.
Amazing Transfer SpeedAchieving 10Gbps USB data transition from NVM Express PCI-e SSD to host PC, MacBook and NAS disk station
When connect to the computer, read the hard disk, exit safely and clone again
Efficient Heat DissipationStereo solid-state hard disk box offline clone base, fast heat dissipation, better protection of hard disk.
Reads two hard drives simultaneously.Please remind The capacity of the target SSD must Large or equal than the original SSD
High PerformancePlug and play, no drivers needed
Confirm SSD Interface Before OrderThisNVME Docking Station only support nvme interface.Support most PCIe NVMe M key or B+M key SSD.
This ACASIS NVME Docking Station can Offline copy, no need to connect to a computer, file data, audio and video data
Easy OperationSSD Not Included

26. Unitek Type C USB 3.0 to SATA I/II/III Mini Dual Bay External Hard Drive Docking Station for 2.5/3.5-inch HDD SSD, Offline Clone Duplicator Function Support UASP and 2 X 16TB with 12V/3A Power Adapter -Hard Drive Enclosures

By Unitek

Unitek Type C USB 3.0 to SATA I II III Mini Dual Bay External Hard Drive Docking Station for 2.5 3.5-inch HDD SSD, Offline Clone Duplicator Function Support UASP and 2 X 16TB with 12V 3A Power Adapter

Make it more durable, high quality and longevity.
Please feel free to contact us at any time.
LED LightThe LED light will be on all the time when you use it, which will remind you of the use status
Copy 1G file only takes 4 seconds.
High SpeedUSB Type C to C cable support positive and negative plug and in, better match your Type C thunderbolt Notebook, Laptop & PC
Make it transfer to your device faster and more efficiently
It will turn off the light when no read state for more than 30 minutes
With USB 3.0 specification and UASP function, faster transfers up to 70% read speeds and 40% faster write speeds over traditional USB 3.0, downward compatible with USB 2.0/1.1
What We Offer1 x Dual-Bay SATA Docking Station, 1 x USB C to C cable, 1 x Power Adapter, 1 x Instruction Manual, 2-year and friendly customer service
Plug & PlayHot-swapping capability, no driver installation is required ,easy and convenient to carry and use.
Tiny Body , High CapacitySuper high capacity, which can support up to 2×16TB that support all 2.5’’ and 3.5’’ external SSD, Hard Disk (HDD) SATA I/II/III drives
Two hard disks read, write and copy each other at the same time
Support offline clone, so convenient that let you duplicate or clone 2 Hard Drives without connecting to the computer.

27. WEme USB C 3.0 to SATA External Hard Drive Dock Docking Station, SSD HDD Disk Duplicator Cloner for Dual Bay 2.5 3.5 Inch SATA I II III, Support UASP and Auto Sleep and 2X 12TB, Black -Hard Drive Enclosures

By WEme

WEme USB C 3.0 to SATA External Hard Drive Dock Docking Station, SSD HDD Disk Duplicator Cloner for Dual Bay 2.5 3.5 Inch SATA I II III, Support UASP and Auto Sleep and 2X 12TB, Black

Copy 1G file only takes 4 seconds.
WEme SATA Dock supports capacity up to 36TB (2x18TB); Support Win7 / 8/10 / XP / Vista / Linux / Mac Os
WEme USB-C Drive Dock equipped with Type C cable, better match your Type C thunderbolt Notebook, Laptop & PC
Smarter user-friendly design, automatically enter Sleep Mode to protect your hard drive after 30 minutes no operation
WEme HDD SSD Cloner support Online duplicator between hard drive and PC & Offline Clone Function without connecting the computer
It can be connected to desktop / laptop / TV / PS4 / Smart Box as home entertainment video storage.
Perfectly compatible with HDD from Seagate/ WD / HGST etc, and SSD from Intel/ Samsung/ Toshiba/ Jmicron etc.
Supports all 2.5″ 3.5″ SATA (I/ II/ III) HDD and SSD
USB 3.0 (5Gbps) Superspeed transfer rate and UASP supported
Tool-free & Driver-free, support Hot-swapping.

28. Type-C Hub with Hard Drive Enclosure, AGPTEK USB-C Docking Station & Stand for Mac Mini with SATA SSD/HDD Slot, TF/SD Card Readers/USB Ports for Mac Mini 2018 or Above -Hard Drive Enclosures

By AGPTEK

Type-C Hub with Hard Drive Enclosure, AGPTEK USB-C Docking Station & Stand for Mac Mini with SATA SSD HDD Slot, TF SD Card Readers USB Ports for Mac Mini 2018 or Above

The screwdriver can remove the screws easily of hard drive enclosure’s cover, no extra tool needed
Our USB-C hub has optimized the issue of color discrepancy in the market to better match the space grey Mac mini chassis
Type-C Hub & Hard Drive Enclosure 2 in 1There is a 2.5″ external hard drive enclosure on the bottom of the hub to expand the memory of your Mac Mini, easily connect a 2.5 Inch SSD&HDD (NOTE: BOTH ONLY SUPPORT SATA Based) for data transfer / storage and also work for to a PC, laptop, game consoles, router.
KINDLY NOTE: You have to insert the cable and SD card label side down when inserting them(The ports are upside down)
There are two LEDs on the front to indicate that it’s successfully connected to the devices and hard disk.
What You Get1 x USB C Hub, 1 x 2 in 1 USB C and USB A cable, 1 x Screw Driver, 1 x Quick Start Guide
USB-C Hub for Mac MiniDesigned for Mac Mini 2018/2020 (Mac Mini 2018/2020 not included)
It is a good partner for Mac Mini! NOTE: a 2 in 1 USB C and USB A cable included for Mac mini 2012 to Mac mini 2020!
Universal USB C dock stationOur dock station is also compatible with other flagship devices with USB-C port, like MacBook/MacBook Pro, iPad Pro 2018/2020 11inch/ 13inch, Huawei Mate10/P20, Samsung S8/S9/Note8, etc
7-in-1 Expansion PortsFeatures a USB – C female port(only link to host), 2 USB 3.0 ports, 2 USB 2.0 ports, and micro/SD card readers for convenient access to your essential peripherals
If you have any questions about products and services, please feel free to contact us, we will reply to you asap.

29. WAVLINK USB 3.0 to SATA External Hard Drive Docking Station for SATA I/II/III 2.5 inch/3.5 Inch HDD,SSD with UASP (6Gbps), Support Backup and Auto Sleep Function [ 10TB ],Tool-Free -Hard Drive Enclosures

By WAVLINK

WAVLINK USB 3.0 to SATA External Hard Drive Docking Station for SATA I II III 2.5 inch 3.5 Inch HDD,SSD with UASP (6Gbps), Support Backup and Auto Sleep Function [ 10TB ],Tool-Free

Supports transfer speeds up to 6Gbps by UASP transfer protocol, which is up to 20% faster than USB 3.0
Built in Power Control Switch; Stable and reliable DC power source: The power supply is highly efficient (12V, 2000mA), so that a stable energy supply is guaranteed.
Tool-free installation allows users to install and unmount within 3 seconds at ease, hot-swapping supported, plug and play.
Speeds up to 5Gbps (USB 3.0),480Mbps (USB 2.0), 12Mbps (USB 1.1)
No drivers are required for the disk dock itself as it uses the standard USB Mass Storage class support already provided in Windows 10 through XP, Mac OS X, and Linux / Unix.
Supports USB 3.0 external, SATA-I/II/III internal; Works great with 2.5 inch and 3.5 inch SATA HDD/SSD.

30. Fasgear USB C to USB C Cable 1.6ft, Type C USB 3.1 Gen 2 10Gbps 4K@60Hz Output 5A 100W Fast Charge Power Delivery (PD),for PD Docking Station,T5 LaCie SSD,Hard Drives,MacBook Pro,iPad Pro 2018,Black -Hard Drive Enclosures

By Fasgear

Fasgear USB C to USB C Cable 1.6ft, Type C USB 3.1 Gen 2 10Gbps 4K@60Hz Output 5A 100W Fast Charge Power Delivery (PD),for PD Docking Station,T5 LaCie SSD,Hard Drives,MacBook Pro,iPad Pro 2018,Black

4K@60Hz Video OutputThis USB 3.1 Type C Gen 2 cable offers 4K@60Hz video output function from USB C laptops to USB C display or monitor, which is easy for you to enjoy watching TV shows, streaming videos and movies to a lager screen! Ideal accessories for your USB C devices for work, home use, business trip and more
NOTE: Both of the laptop and monitor should support 4K resolution.
Your new 87W 15” MacBook Pro at full speed
Built-in 56KΩ pull-up resistor, upgraded intelligent chip with multi protections inside
What You Get1 Pack 1.6ft (0.5m) Fasgear USB C 3.1 Gen 2 to Type C cable and 18-month warranty
10Gbps Data TransferFasgear USB C to USB C Cable supports data transfer rates up to 10Gbps, 20x faster than USB 2.0 Type C cable, only a few seconds with an HD movie
NOTE: Please confirm that your mobile phones will support PD fast charge protocol.
Besides, it supports Quick charge QC 3.0 and PD rapid charging (with PD charger)
Note: If you are not sure whether your device can use this usb-c cable, please contact us and we will help you.
If you have any questions about this item, please feel at ease to connect us via Amazon meaasge
100W Power DeliveryWith E-marker chip inside, this USB C to USB C cable offers rapid charge up to 20V/5A (max)
Note: The actual data transfer denpens on the size and type of files.
And large files will be finished in seconds
Wide ComaptiblityCompatible with Oculus Quest, 11″/12.9″ iPad Pro 2018 , 13″/ 15″ MacBook Pro 2018 2017 2016, New MacBook Air, Google Chromebook Pixel, Xiaomi Air/Pro Laptop, Dell XPS 13/15, HTC U11 10,Galaxy S10/S9/Note 10/Note 9, Huawei P30/P20/Mate30/ Mate 20, OnePlus 7 Pro/7/6, Google Pixel 2/3/ XL/2XL, Nexus 5X/6P, Switch, HP Spectre X360, Asus Zenpad etc
And we will solve the proeblems for you within 24 hours.

31. Elecife USB Type C Hub with Hard Drive Enclosure, 7 in 1 Docking Station for Mac Mini M1 with SATA SSD/HDD Slot, Dual USB 3.0/2.0 Port, TF/SD Card Readers, Compatible with Mac Mini 2018/2020 -Hard Drive Enclosures

By Elecife

Elecife USB Type C Hub with Hard Drive Enclosure, 7 in 1 Docking Station for Mac Mini M1 with SATA SSD HDD Slot, Dual USB 3.0 2.0 Port, TF SD Card Readers, Compatible with Mac Mini 2018 2020

USB C Hub for Mac Mini: Plug and play, Designed for Mac Mini 2018/2020
What You Get: One year warranty, 1 x USB C Hub, 1 x USB C Cable, 1 x Screw Driver, 6 x screws, 1 x user manual
Type C Hub & Hard Drive Enclosure 2 in 1: There is a 2.5″ internal hard drive enclosure on the bottom of the hub to expand the memory of your Mac Mini, easily connect a SSD & HDD (SATA Port) for data transmission/storage ( Max 5TB) and also work for to a PC, laptop, game consoles, router.
Elecife USB C hub is made of exquisite brushed surface and space gray aluminum alloy which is thin and stable
0 ports, SD & TF slots sync data at blazing speeds up to 5Gbps, Note: SD & TF cards can be read simultaneously.
USB 3
Versatile USB C docking station: It’s also compatible with other devices with USB C port, such as MacBook/MacBook Pro, iPad Pro 2018/2020 11inch/13inch, Huawei Mate10/P20, Samsung S8/S9/Note8, etc
If you have any questions with products and service, please feel free to contact us, we will reply to you anytime.
7 in 1 Expansion Ports: Features a USB C female port (only plug to host), dual USB 3.0 ports, dual USB 2.0 ports, and micro/SD card readers for convenient access to your essential peripherals
Note: There are two LEDs on the front to indicate that it’s successfully connected to the devices and hard disk.
So you can not only place the Mac, but also can be used as your desktop stand, and it heat dissipation faster.

32. Thunderbolt 3 Cable 40Gbps, 100W Charging USB C Compatible Support 5K @60HZ Display Data Transfer Cable for Monitor, External SSD, eGpu, USB-C Type-C MacBooks, Dell, Hub, Docking Station (2.6ft) -Hard Drive Enclosures

By Joneytech

Thunderbolt 3 Cable 40Gbps, 100W Charging USB C Compatible Support 5K @60HZ Display Data Transfer Cable for Monitor, External SSD, eGpu, USB-C Type-C MacBooks, Dell, Hub, Docking Station (2.6ft)

More Compatibility: Reversible Thunderbolt USB-C 3 cable compatible with all Thunderbolt 3 devices and backward Compatible with USB 3.1 Gen 1 and 2,Compatible with all Thunderbolt 3 & USB C gadget like Ethernet adapter, USB hub, docking station, eGPU, PCI-E, Razer Core and Windows DELL XPS15,Pixelbook,Macbook pro15/17/18,Alienware,etc
That’s 4x of USB Type C Gen 2 and 8x faster than Type C 3.0
40Gbps Data Transfer: Thunderbolt 3 cable data transfer speed is up to 40Gbps
5K@40Hz Video: Thunderbolt 3 cable support crystal clear HD Dual Monitors at Single 5K (5120 x 2880) @ 40Hz, 8K @30HZ or 4Kx2K (4096×2160) @ 40HZ video resolution, which gives you a visual feast.
You can connect external thunderbolt devices including docking stations, hard drives, external graphics cards, enjoying high data transfer experience
Our service: We provide this Thunderbolt 3.0 Cable with 18-Month worry free period and 24/7 customer service, if you have any questions, we will resolve your issue within 24 hours.
PD 5A/100W fast charging: Thunderbolt 3 USB-C Cable can deliver power in both directions, up to 100W (5A/ 20V) of power delivery,100 W to bus-powered devices.

33. Hard Drive Docking Station, Tccmebius TCC-S862-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External Enclosure with All in 1 Card Reader and USB 2.0 Hub for 2.5″ 3.5″ IDE SATA I/II/III HDD SSD -Hard Drive Enclosures

By Tccmebius

Hard Drive Docking Station, Tccmebius TCC-S862-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External Enclosure with All in 1 Card Reader and USB 2.0 Hub for 2.5 3.5 IDE SATA I II III HDD SSD

Integrated all-in-1 card reader (XD card / TF card / MS (Duo / Pro) card / CF card / SD card), at the same time card reader can read only one memory card, up to 64GB.
In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support.
(Note: Please do not replace the hard drive when the product is working.)
WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius
Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later
Data transfer: Easy transfer of data from your 2.5 “/ 3.5” IDE or SATA hard disk to your computer via USB 2.0 port, USB 2.0 data transfer rate up to 480MB / s
Please select the right model to avoid your order error
For information on using the OTB feature and downloading the OTB software, please refer to the product guide
Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS).
One-Touch Backup: One-Touch functionality makes it easy to copy data and documents from your computer to an external hard drive
Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 “/ 3.5” IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive
Note: OTB software cannot be installed on macOS and IOS systems.

34. Wavlink USB 3.0 to SATA Dual Bay External Hard Drive Docking Station for 2.5/3.5 Inch SSD HDD SATAⅠ/Ⅱ/Ⅲ Support 2×10TB(6Gbps) &UASP with Offline Clone/Backup Function -Hard Drive Enclosures

By WAVLINK

Wavlink USB 3.0 to SATA Dual Bay External Hard Drive Docking Station for 2.5 3.5 Inch SSD HDD SATAⅠ Ⅱ Ⅲ Support 2×10TB(6Gbps) &UASP with Offline Clone Backup Function

Supports all 2.5”/ 3.5” SATA I, SATA II, SATA III HDD SSD, Support 2×10TB hard drivers with UASP protocol,Compatible with Windows,Mac Os,Linux.
Package Includes: 1x USB 3.0 HDD SATA Docking Station; 1x USB 3.0 Cable; 1x 12V/3A Power Adapter; 1x Manual
SATA-III internal; Works great with 2.5 inch and 3.5 inch SATA HDD/SSD USB 3.0 super speed supports UASP for even faster data transfers.
Standalone duplicating / Offline Clone operation with LED indicator, hot-swappable, Tool-free,plug and play, no drivers needed.Offline data copy between two hard drives with no computer involved
Built-in Power Control Switch; Highly efficient (12V, 3A), stable and reliable DC power source guarantees a steady supply of energy; Automatic sleep mode after 30 minutes of inactivity saves energy.
A competent assistant for data backup.
Super speed USB3.0 interfaces with data transfer rates up to 5Gbps; 10 times faster than the traditional USB 2.0

35. Sabrent Tool-Free USB Type-C Dual Docking Station for PCIe NVMe M.2 SSDs with Offline Cloning Function (EC-SSD2) -Hard Drive Enclosures

By SABRENT

COMPATIBILITY: NVMe M.2 form factor compatible with sizes: 2230/2242/2260/2280
CONVENIENCE: Read from and write to both SSDs simultaneously! Quick-release lid for fast access and 100% tool-less design.
SPEED: USB 3.2 supports data transmission speeds of up to 10Gbps for steady and efficient data transfer
Clone your drives without using a computer!
CLONING: Supports OFFLINE cloning
NOT COMPATIBLE with regular M.2 SATA / AHCI SSDs.
DESIGN: Full aluminum construction for maximum heat dissipation
Built-in cooling fan will prevent your disks from throttling due to high temperature.
Backward compatible with USB 3.1 and USB 3.0 at respective speed limits.

36. MAIWO K3016S 2 Bay SATA Docking Station, Tool-Free Type- C to SATA SSD Enclosure for B & M Key M.2 , Support Offline Clone duplicator and one- Key System Disk Copy Function.( 5Gbps) -Hard Drive Enclosures

By MAIWO

MAIWO K3016S 2 Bay SATA Docking Station, Tool-Free Type- C to SATA SSD Enclosure for B & M Key M.2 , Support Offline Clone duplicator and one- Key System Disk Copy Function.( 5Gbps)

Support one- key system disk copy.
EASY TO USE: No need any tools
HIGH-SPEED: USB 3.1 Gen2 supports up to 5Gbps
WIDE COMPATIBILITY：Compatible with Windows/Mac/Linux, can be used to offline clone or to expand storage capacity by connecting PC , Laptop computers, smart TVs, PS4 and other devices.
PORTABLE HDD ENCLOSURE: This hard drive enclosure for B & M Key SATA 2242 2260 2280 22110 M.2 SSDs, Supports 2 M.2 hard disk reads and writes at the same time.(Not support mSATA and NVME)
ONE-KEY OFFLINE CLONE: No need to connect to a PC, Just connect in the power and long press the bottom right button then you can back up your important data
support plug & play and hot swap, no drivers required
hard disk docking station is equipped with C to C cable, A to C cable and a 5V-3A power adapter.
LED indicator lets you know the working status easily.

37. Tccmebius Hard Drive Docking Station, TCC-S868-US USB 3.0 to 2.5 3.5 Inch SATA IDE Dual Slots External HDD Enclosure, for 2.5″ 3.5″ IDE SATA I/II/III HDD SSD -Hard Drive Enclosures

By Tccmebius

In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support.
(Note: Please do not replace the hard drive when the product is working.)
WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius
(How to download OTB software? Please refer to the product’s user manual.)
Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports most 2.5 “/ 3.5” IDE / SATA I / II / III hard disk and SSD, Maximum supports 8TB SATA interface hard drive, IDE interfaces maximum support 1TB hard drive
One-Touch Backup: Through the One-Touch Easily Set Data and Documents From Your Computer Copy to External Hard Drive
Note: To use this feature, you must first install the OTB software on your computer
Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS).
Note: OTB software cannot be installed on macOS and IOS systems.
Data transfer: Tool free installation, Convenient external hard drive reader
Please select the right model to avoid your order error
Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later
Easy transfer of data from your 2.5 “/ 3.5” IDE or SATA hard drive to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5.0Gbps.

38. Inateck Type C SATA Hard Drive Docking Station, USB 3.0 SSD Docking Station,Dual Bay,FD2002C -Hard Drive Enclosures

By Inateck

Offline Cloning: Supports offline data copy between two hard drives with no computer involved
Tool-free, no driver needed
A 1 meter USB C-C cable is packaged with a bandwidth of 5Gbps
Can be used with different Type C laptops and tablets.
Compatible with USB3.1 gen1, USB3.0, USB2.0
UASP is supported.
A competent assistant for data backup
Sufficient Power Supply: Packaged with a 12V 3A power adapter to guarantee enough power supply for dual 10TB hard drives and large-capacity data transmission.
Widely compatible with various 2.5” and 3.5” SATA HDDs/SSDs
Dual-Bay Lightning Transfer: Dual SATA III ports provide 2 hard drives with a bandwidth of 6 Gbps
Can hold hard drives with capacity up to 2x 10TB
Hot-swappable, just plug and play!
Auto-sleep mode: Enters sleep mode after lying idle for 30 minutes to save energy consumption and lengthen hard drive’s life.
Type C Docking Station: Equipped with USB Type C port

39. Thunderbolt 3 Cable 5ft (USB-C to USB-C), BrexLink 40Gbps Data Transfer/ 100W 5A Charging/ 5K@60Hz Type-C Compatible with External SSD, eGpu, USB-C Docking Station, MacBook (Black) -Hard Drive Enclosures

By BrexLink

Thunderbolt 3 Cable 5ft (USB-C to USB-C), BrexLink 40Gbps Data Transfer 100W 5A Charging 5K@60Hz Type-C Compatible with External SSD, eGpu, USB-C Docking Station, MacBook (Black)

Give you a visual feas on your photos, videos, application and text.
Broad Compatibility Reversible Thunderbolt USB-C 3 cable compatible with all Thunderbolt 3 devices and backward Compatible with USB 3.1 Gen 1 and 2,Compatible with all USB C gadget like Ethernet adapter, USB hub, Docking Station,eGPU, PCI-E, Razer Core and Windows DELL XPS15,Pixelbook,Macbook
Support 5K UHD DisplayThunderbolt 3 Cable allows single 5K@60Hz or dual 4K@60Hz video outputs when connecting Thunderbolt port
Designed for Professional UseEnsures the same transmission efficiency while extending the cable length to 5 FT
The Thunderbolt 3 Cable can plug and play freely without adapters
Fast Transfer and Charging Thunderbolt 3 Cable with 40Gbps speed and up to 100w(20V, 5A) of power delivery in both directions, That’s 4x of USB Type C Gen 2 and 8x faster than Type C 3.0
What You Will Get1x BrexLink 5 FT Thunderbolt 3 USB C to C Cable with Extended 24-Month Worry-free warranty and professional customer support.
NOTE: Data transfer speed still depend on what port you are using with
Seamlessly molded joints, flexible TPE cable jackets ensuring safety and longevity.
USB 3.1 Gen 2(10 Gbps) USB3.1 gen 1/ 3.0(5 Gbps)

40. Dual-Bay NVME Docking Station, ORICO Tool-Free USB C to NVME SSD Enclosure for M Key PCIe 2242 2260 2280 22110 M.2 SSDs, Support Offline Clone Duplicator Function Up to 10Gbps(SSD NOT Include)-M2P2 -Hard Drive Enclosures

By ORICO

Dual-Bay NVME Docking Station, ORICO Tool-Free USB C to NVME SSD Enclosure for M Key PCIe 2242 2260 2280 22110 M.2 SSDs, Support Offline Clone Duplicator Function Up to 10Gbps(SSD NOT Include)-M2P2

PORTABLE EXTERNAL STORAGE: this M.2 hard drive enclosure is specially designed for M Key NVMe PCIe SSD(22110/2280/ 2260/ 2242), Supports 2 M.2 NVMe hard disk reads and writes at the same time
They all support plug & play and hot swap, no drivers required
The fastest transmission speed can reach about 1000MB/S with C to C cable and about 500MB/S with C to A cable
If you have any problems, please contact us, we will give you a satisfactory solution within 24 hours.
At the same time, it supports UASP acceleration protocol which can make your NVME SSDs run more quickly and stably.
Except the SSDs, you do not need to prepare anything else, because the package contains all the accessories you need: two 0.5m data cables (A to C and C to C) and a 5V/4A power adapter.
Compatible with Windows/Mac/Linux, can be used to offline clone or to expand storage capacity by connecting PC , Laptop computers, smart TVs, PS4, XBOX and other devices.
10GBP/S HIGH-SPEED: ORICO USB 3.1 Gen2 hard disk docking station is equipped with C to C cable and C to A cable, giving you more choices
12-MONTH-WORRY-FREE WARRANTY: ORICO M.2 external drive docking station will automatically go to sleep after 10 minutes of inactivity; the hard disk is not inclued in the package; ORICO offers 12-month warranty and lifetime email technical support
LED indicator can monitor the SSDs’ clone progress at any time
Note: please back up the data on the target disk before cloning to avoid losing important data.
ONE-KEY OFFLINE CLONE: This dual-slot hard drive enclosure can not only be used as an external NVME SSD to expand your storage capacity, but also can be used for offline backup
EASY TO USE: ORICO Tool-Free SSD docking stations are very easy to use, no need any tools
No need to connect to a PC, just plug in and press the start button then you can back up your important data

Related Posts :

41. USB-C Hub with Hard Drive Enclosure, Hagibis Type-C Docking Station & Stand for Mac Mini M1 with SATA, USB 3.0, SD/TF Card Reader and USB 2.0 Ports for New MM M1 Laptop (Silver for Mac Mini 2020) -Hard Drive Enclosures

By Hagibis

USB-C Hub with Hard Drive Enclosure, Hagibis Type-C Docking Station & Stand for Mac Mini M1 with SATA, USB 3.0, SD TF Card Reader and USB 2.0 Ports for New MM M1 Laptop (Silver for Mac Mini 2020)

Increase Hard Disk Memory: SATA interface, compatible with 2.5-inch mechanical / SSD hard disk, support hard disk expansion within 2TB
Good partner for Mac Mini: Plug and play, make your Mac Mini more useful
USB Interface Can Both Transfer and Expand: The transmission speed of connecting U disk / hard disk can be up to 200M/s
USB-C Hub & HDD Enclosure 2 in 1: Unique design, all using a USB-C cable to connect
Good News for Camera Fans: Fast read and write SD/TF card, support dual card reading and writing at the same time

42. Dell USB 3.0 Ultra HD/4K Triple Display Docking Station (D3100), Black -Hard Drive Enclosures

By Dell

Allow for a triple monitor setup, see compatible Dell models in the description
Designed for Inspiron 15 7567 Gaming, 5459; Latitude 13 7350, 3350, E5270, E5460, E5470, E5570, E7270, E7470; XPS 13 (9343)
2 x USB 2.0 to 4 pin USB Type A, 1 x headphone input and output 3.5 millimeter
3 x super speed USB 3.0 – 9 pin USB type A, 1 x network – RJ-45
1 x display/video: DisplayPort output : 20 pin DisplayPort, super speed cable
2 x display/video: HDMI: 19 pin HDMI type A, 1x HDMI DVI adapter included

43. Sabrent USB 3.0 to SATA External Hard Drive Lay-Flat Docking Station with Built-in Cooling Fan for 2.5 or 3.5in HDD, SSD [Support UASP and 6TB] (EC-DFFN) -Hard Drive Enclosures

By SABRENT

Keep your drives running cool, with Built-in cooling fan.
Reverse compatible with USB 1.1 & USB 2.0.
Supports Standard Desktop 2.5″/3.5″ SATA Hard Drives.
Hot-swappable, plug and play, no drivers needed.
Serial ATA bus up to 6Gbps Signal bandwidth for fast storage backups

44. WAVLINK USB to SATA I/II/III External Hard Drive Docking Station for 2.5/3.5-inch HDD/SSD, Support 8TB, Tool-Free Installation -Hard Drive Enclosures

By WAVLINK

Waht you get: 1x HDD Docking Station, 1x 12V/2A Power Adapter, 1x Instruction Manual
Compatible with Windows 10 through XP, Mac OS X, and Linux / Unix, Support hot-swapping and easy set up.(No drivers are required for the disk dock itself as it uses the standard USB Mass Storage class)
Tool-free installation allows users to install and unmount within 3 seconds at ease, hot-swapping supported, plug and play
Offer 18-month limited warranty.
Supports USB 2.0 external, SATA-III internal; Works great with 2.5 inch and 3.5 inch SATA HDD/SSD
Built-in Power Control Switch; Stable and reliable DC power source: The power supply is highly efficient (12V, 2000mA), so that a stable energy supply is guaranteed.

45. USB 3.1 Gen2 10Gbps Dual-Bay NVME Docking Station,Lay-Flat External Hard Drive Docking Station for M2 SSD Key M, Support Offline Clone Function and Auto Sleep Function (Tool-Free Installation) -Hard Drive Enclosures

By Arkidyn

USB 3.1 Gen2 10Gbps Dual-Bay NVME Docking Station,Lay-Flat External Hard Drive Docking Station for M2 SSD Key M, Support Offline Clone Function and Auto Sleep Function (Tool-Free Installation)

Maximize the use of your SSD hard drive again, perfectly protecting what you love and cherish.
As with all SSDs, new media must be formatted before use.The LED indicator lets you know the working status easily
With the detachable USB-A to USB-C cable and USB-C to USB-C cable, it is quite flexible to connect and take along.24-Month Worry-free Warranty.
Backwards compatible with USB3.1GEN1/USB 2.0/USB 1.1 ports.Note1:hard disk not included.Note 2：Offline copy cannot be connected to the computer.
USB-C Gen 1 and USB 3.0 systems supported at up to 5Gbps
(Need to connect the included charger)Supports 2 M.2 (NVME) hard disk reads and writes at the same time.It protects the hard disk from outside scratches and makes M.2 hard drive portable for data storage
Portable External Storage :USB3.1 GEN 2 hard drive enclosure can easily connect your M.2(NVME) to a PC, laptop for data transfer
Transfer 10GB files in seconds, saving up the loading time to do more
Easy Installation&Friendly Design : Plug-and-play compatibility with Windows, Mac, and Linux
COMPATIBILITY: Compatible with M.2 NVMe SSDs.(2230 2242 2260 2280 these four specifications of the hard disk) .Performance depends on host system, workload, and NVMe media used
Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.
USB-C Gen 2 or Thunderbolt 3 host recommended for fastest performance
Offline Clone cannot be connected to the computer.USB3.1 GEN 2（10Gbps):The maximum data transfer speed of the USB 3.1 interface is 10Gbps
Copying is a full-to-one cloning method, so please back up the data on the target disk before copying to avoid loss of important data!
Support Offline One-Click Copy:Offline copy, no need to connect to a computer, file data, audio and video data, one-click offline copy, easy operation.Note: Copying does not intelligently identify the data on the hard disk